From 78e05bd172aca74b30293d9c5964ef3c706ad4db Mon Sep 17 00:00:00 2001 From: tmk Date: Tue, 27 Oct 2020 03:45:34 +0900 Subject: [PATCH] usb_hid: Delete arduino cores 1.0.1 --- .../arduino-1.0.1/cores/arduino/Arduino.h | 215 ------ .../arduino-1.0.1/cores/arduino/CDC.cpp | 233 ------ .../arduino-1.0.1/cores/arduino/Client.h | 26 - .../arduino-1.0.1/cores/arduino/HID.cpp | 520 -------------- .../cores/arduino/HardwareSerial.cpp | 428 ----------- .../cores/arduino/HardwareSerial.h | 81 --- .../arduino-1.0.1/cores/arduino/IPAddress.cpp | 56 -- .../arduino-1.0.1/cores/arduino/IPAddress.h | 76 -- .../arduino-1.0.1/cores/arduino/Platform.h | 23 - .../arduino-1.0.1/cores/arduino/Print.cpp | 263 ------- .../arduino-1.0.1/cores/arduino/Print.h | 78 -- .../arduino-1.0.1/cores/arduino/Printable.h | 40 -- .../arduino-1.0.1/cores/arduino/Server.h | 9 - .../arduino-1.0.1/cores/arduino/Stream.cpp | 270 ------- .../arduino-1.0.1/cores/arduino/Stream.h | 96 --- .../arduino-1.0.1/cores/arduino/Tone.cpp | 601 ---------------- .../arduino-1.0.1/cores/arduino/USBAPI.h | 195 ----- .../arduino-1.0.1/cores/arduino/USBCore.cpp | 672 ------------------ .../arduino-1.0.1/cores/arduino/USBCore.h | 303 -------- .../arduino-1.0.1/cores/arduino/USBDesc.h | 63 -- .../usb_hid/arduino-1.0.1/cores/arduino/Udp.h | 88 --- .../arduino-1.0.1/cores/arduino/WCharacter.h | 168 ----- .../arduino-1.0.1/cores/arduino/WInterrupts.c | 298 -------- .../arduino-1.0.1/cores/arduino/WMath.cpp | 60 -- .../arduino-1.0.1/cores/arduino/WString.cpp | 645 ----------------- .../arduino-1.0.1/cores/arduino/WString.h | 205 ------ .../arduino-1.0.1/cores/arduino/binary.h | 515 -------------- .../arduino-1.0.1/cores/arduino/main.cpp | 20 - .../arduino-1.0.1/cores/arduino/new.cpp | 18 - .../usb_hid/arduino-1.0.1/cores/arduino/new.h | 22 - .../arduino-1.0.1/cores/arduino/wiring.c | 324 --------- .../cores/arduino/wiring_analog.c | 282 -------- .../cores/arduino/wiring_digital.c | 178 ----- .../cores/arduino/wiring_private.h | 69 -- .../cores/arduino/wiring_pulse.c | 69 -- .../cores/arduino/wiring_shift.c | 55 -- .../variants/eightanaloginputs/pins_arduino.h | 27 - .../variants/leonardo/pins_arduino.h | 256 ------- .../variants/mega/pins_arduino.h | 363 ---------- .../variants/standard/pins_arduino.h | 218 ------ tmk_core/protocol/usb_hid/test/Makefile | 126 ---- tmk_core/protocol/usb_hid/test/config.h | 40 -- tmk_core/protocol/usb_hid/test/test.cpp | 92 --- 43 files changed, 8386 deletions(-) delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Arduino.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/CDC.cpp delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Client.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/HID.cpp delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/HardwareSerial.cpp delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/HardwareSerial.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/IPAddress.cpp delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/IPAddress.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Platform.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Print.cpp delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Print.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Printable.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Server.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Stream.cpp delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Stream.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Tone.cpp delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/USBAPI.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/USBCore.cpp delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/USBCore.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/USBDesc.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Udp.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/WCharacter.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/WInterrupts.c delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/WMath.cpp delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/WString.cpp delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/WString.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/binary.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/main.cpp delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/new.cpp delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/new.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring.c delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_analog.c delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_digital.c delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_private.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_pulse.c delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_shift.c delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/variants/eightanaloginputs/pins_arduino.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/variants/leonardo/pins_arduino.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/variants/mega/pins_arduino.h delete mode 100644 tmk_core/protocol/usb_hid/arduino-1.0.1/variants/standard/pins_arduino.h delete mode 100644 tmk_core/protocol/usb_hid/test/Makefile delete mode 100644 tmk_core/protocol/usb_hid/test/config.h delete mode 100644 tmk_core/protocol/usb_hid/test/test.cpp diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Arduino.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Arduino.h deleted file mode 100644 index 830c9952..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Arduino.h +++ /dev/null @@ -1,215 +0,0 @@ -#ifndef Arduino_h -#define Arduino_h - -#include -#include -#include - -#include -#include -#include - -#include "binary.h" - -#ifdef __cplusplus -extern "C"{ -#endif - -#define HIGH 0x1 -#define LOW 0x0 - -#define INPUT 0x0 -#define OUTPUT 0x1 -#define INPUT_PULLUP 0x2 - -#define true 0x1 -#define false 0x0 - -#define PI 3.1415926535897932384626433832795 -#define HALF_PI 1.5707963267948966192313216916398 -#define TWO_PI 6.283185307179586476925286766559 -#define DEG_TO_RAD 0.017453292519943295769236907684886 -#define RAD_TO_DEG 57.295779513082320876798154814105 - -#define SERIAL 0x0 -#define DISPLAY 0x1 - -#define LSBFIRST 0 -#define MSBFIRST 1 - -#define CHANGE 1 -#define FALLING 2 -#define RISING 3 - -#if defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) || defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__) -#define DEFAULT 0 -#define EXTERNAL 1 -#define INTERNAL 2 -#else -#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1284P__) -#define INTERNAL1V1 2 -#define INTERNAL2V56 3 -#else -#define INTERNAL 3 -#endif -#define DEFAULT 1 -#define EXTERNAL 0 -#endif - -// undefine stdlib's abs if encountered -#ifdef abs -#undef abs -#endif - -#define min(a,b) ((a)<(b)?(a):(b)) -#define max(a,b) ((a)>(b)?(a):(b)) -#define abs(x) ((x)>0?(x):-(x)) -#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt))) -#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5)) -#define radians(deg) ((deg)*DEG_TO_RAD) -#define degrees(rad) ((rad)*RAD_TO_DEG) -#define sq(x) ((x)*(x)) - -#define interrupts() sei() -#define noInterrupts() cli() - -#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) -#define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() ) -#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() ) - -#define lowByte(w) ((uint8_t) ((w) & 0xff)) -#define highByte(w) ((uint8_t) ((w) >> 8)) - -#define bitRead(value, bit) (((value) >> (bit)) & 0x01) -#define bitSet(value, bit) ((value) |= (1UL << (bit))) -#define bitClear(value, bit) ((value) &= ~(1UL << (bit))) -#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit)) - - -typedef unsigned int word; - -#define bit(b) (1UL << (b)) - -typedef uint8_t boolean; -typedef uint8_t byte; - -void init(void); - -void pinMode(uint8_t, uint8_t); -void digitalWrite(uint8_t, uint8_t); -int digitalRead(uint8_t); -int analogRead(uint8_t); -void analogReference(uint8_t mode); -void analogWrite(uint8_t, int); - -unsigned long millis(void); -unsigned long micros(void); -void delay(unsigned long); -void delayMicroseconds(unsigned int us); -unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout); - -void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val); -uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder); - -void attachInterrupt(uint8_t, void (*)(void), int mode); -void detachInterrupt(uint8_t); - -void setup(void); -void loop(void); - -// Get the bit location within the hardware port of the given virtual pin. -// This comes from the pins_*.c file for the active board configuration. - -#define analogInPinToBit(P) (P) - -// On the ATmega1280, the addresses of some of the port registers are -// greater than 255, so we can't store them in uint8_t's. -extern const uint16_t PROGMEM port_to_mode_PGM[]; -extern const uint16_t PROGMEM port_to_input_PGM[]; -extern const uint16_t PROGMEM port_to_output_PGM[]; - -extern const uint8_t PROGMEM digital_pin_to_port_PGM[]; -// extern const uint8_t PROGMEM digital_pin_to_bit_PGM[]; -extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[]; -extern const uint8_t PROGMEM digital_pin_to_timer_PGM[]; - -// Get the bit location within the hardware port of the given virtual pin. -// This comes from the pins_*.c file for the active board configuration. -// -// These perform slightly better as macros compared to inline functions -// -#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) ) -#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) ) -#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) ) -#define analogInPinToBit(P) (P) -#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_output_PGM + (P))) ) -#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_input_PGM + (P))) ) -#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_mode_PGM + (P))) ) - -#define NOT_A_PIN 0 -#define NOT_A_PORT 0 - -#ifdef ARDUINO_MAIN -#define PA 1 -#define PB 2 -#define PC 3 -#define PD 4 -#define PE 5 -#define PF 6 -#define PG 7 -#define PH 8 -#define PJ 10 -#define PK 11 -#define PL 12 -#endif - -#define NOT_ON_TIMER 0 -#define TIMER0A 1 -#define TIMER0B 2 -#define TIMER1A 3 -#define TIMER1B 4 -#define TIMER2 5 -#define TIMER2A 6 -#define TIMER2B 7 - -#define TIMER3A 8 -#define TIMER3B 9 -#define TIMER3C 10 -#define TIMER4A 11 -#define TIMER4B 12 -#define TIMER4C 13 -#define TIMER4D 14 -#define TIMER5A 15 -#define TIMER5B 16 -#define TIMER5C 17 - -#ifdef __cplusplus -} // extern "C" -#endif - -#ifdef __cplusplus -#include "WCharacter.h" -#include "WString.h" -#include "HardwareSerial.h" - -uint16_t makeWord(uint16_t w); -uint16_t makeWord(byte h, byte l); - -#define word(...) makeWord(__VA_ARGS__) - -unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L); - -void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0); -void noTone(uint8_t _pin); - -// WMath prototypes -long random(long); -long random(long, long); -void randomSeed(unsigned int); -long map(long, long, long, long, long); - -#endif - -#include "pins_arduino.h" - -#endif diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/CDC.cpp b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/CDC.cpp deleted file mode 100644 index 1ee3a488..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/CDC.cpp +++ /dev/null @@ -1,233 +0,0 @@ - - -/* Copyright (c) 2011, Peter Barrett -** -** Permission to use, copy, modify, and/or distribute this software for -** any purpose with or without fee is hereby granted, provided that the -** above copyright notice and this permission notice appear in all copies. -** -** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL -** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED -** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR -** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES -** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -** SOFTWARE. -*/ - -#include "Platform.h" -#include "USBAPI.h" -#include - -#if defined(USBCON) -#ifdef CDC_ENABLED - -#if (RAMEND < 1000) -#define SERIAL_BUFFER_SIZE 16 -#else -#define SERIAL_BUFFER_SIZE 64 -#endif - -struct ring_buffer -{ - unsigned char buffer[SERIAL_BUFFER_SIZE]; - volatile int head; - volatile int tail; -}; - -ring_buffer cdc_rx_buffer = { { 0 }, 0, 0}; - -typedef struct -{ - u32 dwDTERate; - u8 bCharFormat; - u8 bParityType; - u8 bDataBits; - u8 lineState; -} LineInfo; - -static volatile LineInfo _usbLineInfo = { 57600, 0x00, 0x00, 0x00, 0x00 }; - -#define WEAK __attribute__ ((weak)) - -extern const CDCDescriptor _cdcInterface PROGMEM; -const CDCDescriptor _cdcInterface = -{ - D_IAD(0,2,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,1), - - // CDC communication interface - D_INTERFACE(CDC_ACM_INTERFACE,1,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,0), - D_CDCCS(CDC_HEADER,0x10,0x01), // Header (1.10 bcd) - D_CDCCS(CDC_CALL_MANAGEMENT,1,1), // Device handles call management (not) - D_CDCCS4(CDC_ABSTRACT_CONTROL_MANAGEMENT,6), // SET_LINE_CODING, GET_LINE_CODING, SET_CONTROL_LINE_STATE supported - D_CDCCS(CDC_UNION,CDC_ACM_INTERFACE,CDC_DATA_INTERFACE), // Communication interface is master, data interface is slave 0 - D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_ACM),USB_ENDPOINT_TYPE_INTERRUPT,0x10,0x40), - - // CDC data interface - D_INTERFACE(CDC_DATA_INTERFACE,2,CDC_DATA_INTERFACE_CLASS,0,0), - D_ENDPOINT(USB_ENDPOINT_OUT(CDC_ENDPOINT_OUT),USB_ENDPOINT_TYPE_BULK,0x40,0), - D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_IN ),USB_ENDPOINT_TYPE_BULK,0x40,0) -}; - -int WEAK CDC_GetInterface(u8* interfaceNum) -{ - interfaceNum[0] += 2; // uses 2 - return USB_SendControl(TRANSFER_PGM,&_cdcInterface,sizeof(_cdcInterface)); -} - -bool WEAK CDC_Setup(Setup& setup) -{ - u8 r = setup.bRequest; - u8 requestType = setup.bmRequestType; - - if (REQUEST_DEVICETOHOST_CLASS_INTERFACE == requestType) - { - if (CDC_GET_LINE_CODING == r) - { - USB_SendControl(0,(void*)&_usbLineInfo,7); - return true; - } - } - - if (REQUEST_HOSTTODEVICE_CLASS_INTERFACE == requestType) - { - if (CDC_SET_LINE_CODING == r) - { - USB_RecvControl((void*)&_usbLineInfo,7); - return true; - } - - if (CDC_SET_CONTROL_LINE_STATE == r) - { - _usbLineInfo.lineState = setup.wValueL; - - // auto-reset into the bootloader is triggered when the port, already - // open at 1200 bps, is closed. this is the signal to start the watchdog - // with a relatively long period so it can finish housekeeping tasks - // like servicing endpoints before the sketch ends - if (1200 == _usbLineInfo.dwDTERate) { - // We check DTR state to determine if host port is open (bit 0 of lineState). - if ((_usbLineInfo.lineState & 0x01) == 0) { - *(uint16_t *)0x0800 = 0x7777; - wdt_enable(WDTO_120MS); - } else { - // Most OSs do some intermediate steps when configuring ports and DTR can - // twiggle more than once before stabilizing. - // To avoid spurious resets we set the watchdog to 250ms and eventually - // cancel if DTR goes back high. - - wdt_disable(); - wdt_reset(); - *(uint16_t *)0x0800 = 0x0; - } - } - return true; - } - } - return false; -} - - -int _serialPeek = -1; -void Serial_::begin(uint16_t baud_count) -{ -} - -void Serial_::end(void) -{ -} - -void Serial_::accept(void) -{ - ring_buffer *buffer = &cdc_rx_buffer; - int c = USB_Recv(CDC_RX); - int i = (unsigned int)(buffer->head+1) % SERIAL_BUFFER_SIZE; - - // if we should be storing the received character into the location - // just before the tail (meaning that the head would advance to the - // current location of the tail), we're about to overflow the buffer - // and so we don't write the character or advance the head. - if (i != buffer->tail) { - buffer->buffer[buffer->head] = c; - buffer->head = i; - } -} - -int Serial_::available(void) -{ - ring_buffer *buffer = &cdc_rx_buffer; - return (unsigned int)(SERIAL_BUFFER_SIZE + buffer->head - buffer->tail) % SERIAL_BUFFER_SIZE; -} - -int Serial_::peek(void) -{ - ring_buffer *buffer = &cdc_rx_buffer; - if (buffer->head == buffer->tail) { - return -1; - } else { - return buffer->buffer[buffer->tail]; - } -} - -int Serial_::read(void) -{ - ring_buffer *buffer = &cdc_rx_buffer; - // if the head isn't ahead of the tail, we don't have any characters - if (buffer->head == buffer->tail) { - return -1; - } else { - unsigned char c = buffer->buffer[buffer->tail]; - buffer->tail = (unsigned int)(buffer->tail + 1) % SERIAL_BUFFER_SIZE; - return c; - } -} - -void Serial_::flush(void) -{ - USB_Flush(CDC_TX); -} - -size_t Serial_::write(uint8_t c) -{ - /* only try to send bytes if the high-level CDC connection itself - is open (not just the pipe) - the OS should set lineState when the port - is opened and clear lineState when the port is closed. - bytes sent before the user opens the connection or after - the connection is closed are lost - just like with a UART. */ - - // TODO - ZE - check behavior on different OSes and test what happens if an - // open connection isn't broken cleanly (cable is yanked out, host dies - // or locks up, or host virtual serial port hangs) - if (_usbLineInfo.lineState > 0) { - int r = USB_Send(CDC_TX,&c,1); - if (r > 0) { - return r; - } else { - setWriteError(); - return 0; - } - } - setWriteError(); - return 0; -} - -// This operator is a convenient way for a sketch to check whether the -// port has actually been configured and opened by the host (as opposed -// to just being connected to the host). It can be used, for example, in -// setup() before printing to ensure that an application on the host is -// actually ready to receive and display the data. -// We add a short delay before returning to fix a bug observed by Federico -// where the port is configured (lineState != 0) but not quite opened. -Serial_::operator bool() { - bool result = false; - if (_usbLineInfo.lineState > 0) - result = true; - delay(10); - return result; -} - -Serial_ Serial; - -#endif -#endif /* if defined(USBCON) */ diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Client.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Client.h deleted file mode 100644 index ea134838..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Client.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef client_h -#define client_h -#include "Print.h" -#include "Stream.h" -#include "IPAddress.h" - -class Client : public Stream { - -public: - virtual int connect(IPAddress ip, uint16_t port) =0; - virtual int connect(const char *host, uint16_t port) =0; - virtual size_t write(uint8_t) =0; - virtual size_t write(const uint8_t *buf, size_t size) =0; - virtual int available() = 0; - virtual int read() = 0; - virtual int read(uint8_t *buf, size_t size) = 0; - virtual int peek() = 0; - virtual void flush() = 0; - virtual void stop() = 0; - virtual uint8_t connected() = 0; - virtual operator bool() = 0; -protected: - uint8_t* rawIPAddress(IPAddress& addr) { return addr.raw_address(); }; -}; - -#endif diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/HID.cpp b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/HID.cpp deleted file mode 100644 index ac636084..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/HID.cpp +++ /dev/null @@ -1,520 +0,0 @@ - - -/* Copyright (c) 2011, Peter Barrett -** -** Permission to use, copy, modify, and/or distribute this software for -** any purpose with or without fee is hereby granted, provided that the -** above copyright notice and this permission notice appear in all copies. -** -** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL -** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED -** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR -** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES -** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -** SOFTWARE. -*/ - -#include "Platform.h" -#include "USBAPI.h" -#include "USBDesc.h" - -#if defined(USBCON) -#ifdef HID_ENABLED - -//#define RAWHID_ENABLED - -// Singletons for mouse and keyboard - -Mouse_ Mouse; -Keyboard_ Keyboard; - -//================================================================================ -//================================================================================ - -// HID report descriptor - -#define LSB(_x) ((_x) & 0xFF) -#define MSB(_x) ((_x) >> 8) - -#define RAWHID_USAGE_PAGE 0xFFC0 -#define RAWHID_USAGE 0x0C00 -#define RAWHID_TX_SIZE 64 -#define RAWHID_RX_SIZE 64 - -extern const u8 _hidReportDescriptor[] PROGMEM; -const u8 _hidReportDescriptor[] = { - - // Mouse - 0x05, 0x01, // USAGE_PAGE (Generic Desktop) // 54 - 0x09, 0x02, // USAGE (Mouse) - 0xa1, 0x01, // COLLECTION (Application) - 0x09, 0x01, // USAGE (Pointer) - 0xa1, 0x00, // COLLECTION (Physical) - 0x85, 0x01, // REPORT_ID (1) - 0x05, 0x09, // USAGE_PAGE (Button) - 0x19, 0x01, // USAGE_MINIMUM (Button 1) - 0x29, 0x03, // USAGE_MAXIMUM (Button 3) - 0x15, 0x00, // LOGICAL_MINIMUM (0) - 0x25, 0x01, // LOGICAL_MAXIMUM (1) - 0x95, 0x03, // REPORT_COUNT (3) - 0x75, 0x01, // REPORT_SIZE (1) - 0x81, 0x02, // INPUT (Data,Var,Abs) - 0x95, 0x01, // REPORT_COUNT (1) - 0x75, 0x05, // REPORT_SIZE (5) - 0x81, 0x03, // INPUT (Cnst,Var,Abs) - 0x05, 0x01, // USAGE_PAGE (Generic Desktop) - 0x09, 0x30, // USAGE (X) - 0x09, 0x31, // USAGE (Y) - 0x09, 0x38, // USAGE (Wheel) - 0x15, 0x81, // LOGICAL_MINIMUM (-127) - 0x25, 0x7f, // LOGICAL_MAXIMUM (127) - 0x75, 0x08, // REPORT_SIZE (8) - 0x95, 0x03, // REPORT_COUNT (3) - 0x81, 0x06, // INPUT (Data,Var,Rel) - 0xc0, // END_COLLECTION - 0xc0, // END_COLLECTION - - // Keyboard - 0x05, 0x01, // USAGE_PAGE (Generic Desktop) // 47 - 0x09, 0x06, // USAGE (Keyboard) - 0xa1, 0x01, // COLLECTION (Application) - 0x85, 0x02, // REPORT_ID (2) - 0x05, 0x07, // USAGE_PAGE (Keyboard) - - 0x19, 0xe0, // USAGE_MINIMUM (Keyboard LeftControl) - 0x29, 0xe7, // USAGE_MAXIMUM (Keyboard Right GUI) - 0x15, 0x00, // LOGICAL_MINIMUM (0) - 0x25, 0x01, // LOGICAL_MAXIMUM (1) - 0x75, 0x01, // REPORT_SIZE (1) - - 0x95, 0x08, // REPORT_COUNT (8) - 0x81, 0x02, // INPUT (Data,Var,Abs) - 0x95, 0x01, // REPORT_COUNT (1) - 0x75, 0x08, // REPORT_SIZE (8) - 0x81, 0x03, // INPUT (Cnst,Var,Abs) - - 0x95, 0x06, // REPORT_COUNT (6) - 0x75, 0x08, // REPORT_SIZE (8) - 0x15, 0x00, // LOGICAL_MINIMUM (0) - 0x25, 0x65, // LOGICAL_MAXIMUM (101) - 0x05, 0x07, // USAGE_PAGE (Keyboard) - - 0x19, 0x00, // USAGE_MINIMUM (Reserved (no event indicated)) - 0x29, 0x65, // USAGE_MAXIMUM (Keyboard Application) - 0x81, 0x00, // INPUT (Data,Ary,Abs) - 0xc0, // END_COLLECTION - -#if RAWHID_ENABLED - // RAW HID - 0x06, LSB(RAWHID_USAGE_PAGE), MSB(RAWHID_USAGE_PAGE), // 30 - 0x0A, LSB(RAWHID_USAGE), MSB(RAWHID_USAGE), - - 0xA1, 0x01, // Collection 0x01 - 0x85, 0x03, // REPORT_ID (3) - 0x75, 0x08, // report size = 8 bits - 0x15, 0x00, // logical minimum = 0 - 0x26, 0xFF, 0x00, // logical maximum = 255 - - 0x95, 64, // report count TX - 0x09, 0x01, // usage - 0x81, 0x02, // Input (array) - - 0x95, 64, // report count RX - 0x09, 0x02, // usage - 0x91, 0x02, // Output (array) - 0xC0 // end collection -#endif -}; - -extern const HIDDescriptor _hidInterface PROGMEM; -const HIDDescriptor _hidInterface = -{ - D_INTERFACE(HID_INTERFACE,1,3,0,0), - D_HIDREPORT(sizeof(_hidReportDescriptor)), - D_ENDPOINT(USB_ENDPOINT_IN (HID_ENDPOINT_INT),USB_ENDPOINT_TYPE_INTERRUPT,0x40,0x01) -}; - -//================================================================================ -//================================================================================ -// Driver - -u8 _hid_protocol = 1; -u8 _hid_idle = 1; - -#define WEAK __attribute__ ((weak)) - -int WEAK HID_GetInterface(u8* interfaceNum) -{ - interfaceNum[0] += 1; // uses 1 - return USB_SendControl(TRANSFER_PGM,&_hidInterface,sizeof(_hidInterface)); -} - -int WEAK HID_GetDescriptor(int i) -{ - return USB_SendControl(TRANSFER_PGM,_hidReportDescriptor,sizeof(_hidReportDescriptor)); -} - -void WEAK HID_SendReport(u8 id, const void* data, int len) -{ - USB_Send(HID_TX, &id, 1); - USB_Send(HID_TX | TRANSFER_RELEASE,data,len); -} - -bool WEAK HID_Setup(Setup& setup) -{ - u8 r = setup.bRequest; - u8 requestType = setup.bmRequestType; - if (REQUEST_DEVICETOHOST_CLASS_INTERFACE == requestType) - { - if (HID_GET_REPORT == r) - { - //HID_GetReport(); - return true; - } - if (HID_GET_PROTOCOL == r) - { - //Send8(_hid_protocol); // TODO - return true; - } - } - - if (REQUEST_HOSTTODEVICE_CLASS_INTERFACE == requestType) - { - if (HID_SET_PROTOCOL == r) - { - _hid_protocol = setup.wValueL; - return true; - } - - if (HID_SET_IDLE == r) - { - _hid_idle = setup.wValueL; - return true; - } - } - return false; -} - -//================================================================================ -//================================================================================ -// Mouse - -Mouse_::Mouse_(void) : _buttons(0) -{ -} - -void Mouse_::begin(void) -{ -} - -void Mouse_::end(void) -{ -} - -void Mouse_::click(uint8_t b) -{ - _buttons = b; - move(0,0,0); - _buttons = 0; - move(0,0,0); -} - -void Mouse_::move(signed char x, signed char y, signed char wheel) -{ - u8 m[4]; - m[0] = _buttons; - m[1] = x; - m[2] = y; - m[3] = wheel; - HID_SendReport(1,m,4); -} - -void Mouse_::buttons(uint8_t b) -{ - if (b != _buttons) - { - _buttons = b; - move(0,0,0); - } -} - -void Mouse_::press(uint8_t b) -{ - buttons(_buttons | b); -} - -void Mouse_::release(uint8_t b) -{ - buttons(_buttons & ~b); -} - -bool Mouse_::isPressed(uint8_t b) -{ - if ((b & _buttons) > 0) - return true; - return false; -} - -//================================================================================ -//================================================================================ -// Keyboard - -Keyboard_::Keyboard_(void) -{ -} - -void Keyboard_::begin(void) -{ -} - -void Keyboard_::end(void) -{ -} - -void Keyboard_::sendReport(KeyReport* keys) -{ - HID_SendReport(2,keys,sizeof(KeyReport)); -} - -extern -const uint8_t _asciimap[128] PROGMEM; - -#define SHIFT 0x80 -const uint8_t _asciimap[128] = -{ - 0x00, // NUL - 0x00, // SOH - 0x00, // STX - 0x00, // ETX - 0x00, // EOT - 0x00, // ENQ - 0x00, // ACK - 0x00, // BEL - 0x2a, // BS Backspace - 0x2b, // TAB Tab - 0x28, // LF Enter - 0x00, // VT - 0x00, // FF - 0x00, // CR - 0x00, // SO - 0x00, // SI - 0x00, // DEL - 0x00, // DC1 - 0x00, // DC2 - 0x00, // DC3 - 0x00, // DC4 - 0x00, // NAK - 0x00, // SYN - 0x00, // ETB - 0x00, // CAN - 0x00, // EM - 0x00, // SUB - 0x00, // ESC - 0x00, // FS - 0x00, // GS - 0x00, // RS - 0x00, // US - - 0x2c, // ' ' - 0x1e|SHIFT, // ! - 0x34|SHIFT, // " - 0x20|SHIFT, // # - 0x21|SHIFT, // $ - 0x22|SHIFT, // % - 0x24|SHIFT, // & - 0x34, // ' - 0x26|SHIFT, // ( - 0x27|SHIFT, // ) - 0x25|SHIFT, // * - 0x2e|SHIFT, // + - 0x36, // , - 0x2d, // - - 0x37, // . - 0x38, // / - 0x27, // 0 - 0x1e, // 1 - 0x1f, // 2 - 0x20, // 3 - 0x21, // 4 - 0x22, // 5 - 0x23, // 6 - 0x24, // 7 - 0x25, // 8 - 0x26, // 9 - 0x33|SHIFT, // : - 0x33, // ; - 0x36|SHIFT, // < - 0x2e, // = - 0x37|SHIFT, // > - 0x38|SHIFT, // ? - 0x1f|SHIFT, // @ - 0x04|SHIFT, // A - 0x05|SHIFT, // B - 0x06|SHIFT, // C - 0x07|SHIFT, // D - 0x08|SHIFT, // E - 0x09|SHIFT, // F - 0x0a|SHIFT, // G - 0x0b|SHIFT, // H - 0x0c|SHIFT, // I - 0x0d|SHIFT, // J - 0x0e|SHIFT, // K - 0x0f|SHIFT, // L - 0x10|SHIFT, // M - 0x11|SHIFT, // N - 0x12|SHIFT, // O - 0x13|SHIFT, // P - 0x14|SHIFT, // Q - 0x15|SHIFT, // R - 0x16|SHIFT, // S - 0x17|SHIFT, // T - 0x18|SHIFT, // U - 0x19|SHIFT, // V - 0x1a|SHIFT, // W - 0x1b|SHIFT, // X - 0x1c|SHIFT, // Y - 0x1d|SHIFT, // Z - 0x2f, // [ - 0x31, // bslash - 0x30, // ] - 0x23|SHIFT, // ^ - 0x2d|SHIFT, // _ - 0x35, // ` - 0x04, // a - 0x05, // b - 0x06, // c - 0x07, // d - 0x08, // e - 0x09, // f - 0x0a, // g - 0x0b, // h - 0x0c, // i - 0x0d, // j - 0x0e, // k - 0x0f, // l - 0x10, // m - 0x11, // n - 0x12, // o - 0x13, // p - 0x14, // q - 0x15, // r - 0x16, // s - 0x17, // t - 0x18, // u - 0x19, // v - 0x1a, // w - 0x1b, // x - 0x1c, // y - 0x1d, // z - 0x2f|SHIFT, // - 0x31|SHIFT, // | - 0x30|SHIFT, // } - 0x35|SHIFT, // ~ - 0 // DEL -}; - -uint8_t USBPutChar(uint8_t c); - -// press() adds the specified key (printing, non-printing, or modifier) -// to the persistent key report and sends the report. Because of the way -// USB HID works, the host acts like the key remains pressed until we -// call release(), releaseAll(), or otherwise clear the report and resend. -size_t Keyboard_::press(uint8_t k) -{ - uint8_t i; - if (k >= 136) { // it's a non-printing key (not a modifier) - k = k - 136; - } else if (k >= 128) { // it's a modifier key - _keyReport.modifiers |= (1<<(k-128)); - k = 0; - } else { // it's a printing key - k = pgm_read_byte(_asciimap + k); - if (!k) { - setWriteError(); - return 0; - } - if (k & 0x80) { // it's a capital letter or other character reached with shift - _keyReport.modifiers |= 0x02; // the left shift modifier - k &= 0x7F; - } - } - - // Add k to the key report only if it's not already present - // and if there is an empty slot. - if (_keyReport.keys[0] != k && _keyReport.keys[1] != k && - _keyReport.keys[2] != k && _keyReport.keys[3] != k && - _keyReport.keys[4] != k && _keyReport.keys[5] != k) { - - for (i=0; i<6; i++) { - if (_keyReport.keys[i] == 0x00) { - _keyReport.keys[i] = k; - break; - } - } - if (i == 6) { - setWriteError(); - return 0; - } - } - sendReport(&_keyReport); - return 1; -} - -// release() takes the specified key out of the persistent key report and -// sends the report. This tells the OS the key is no longer pressed and that -// it shouldn't be repeated any more. -size_t Keyboard_::release(uint8_t k) -{ - uint8_t i; - if (k >= 136) { // it's a non-printing key (not a modifier) - k = k - 136; - } else if (k >= 128) { // it's a modifier key - _keyReport.modifiers &= ~(1<<(k-128)); - k = 0; - } else { // it's a printing key - k = pgm_read_byte(_asciimap + k); - if (!k) { - return 0; - } - if (k & 0x80) { // it's a capital letter or other character reached with shift - _keyReport.modifiers &= ~(0x02); // the left shift modifier - k &= 0x7F; - } - } - - // Test the key report to see if k is present. Clear it if it exists. - // Check all positions in case the key is present more than once (which it shouldn't be) - for (i=0; i<6; i++) { - if (0 != k && _keyReport.keys[i] == k) { - _keyReport.keys[i] = 0x00; - } - } - - sendReport(&_keyReport); - return 1; -} - -void Keyboard_::releaseAll(void) -{ - _keyReport.keys[0] = 0; - _keyReport.keys[1] = 0; - _keyReport.keys[2] = 0; - _keyReport.keys[3] = 0; - _keyReport.keys[4] = 0; - _keyReport.keys[5] = 0; - _keyReport.modifiers = 0; - sendReport(&_keyReport); -} - -size_t Keyboard_::write(uint8_t c) -{ - uint8_t p = press(c); // Keydown - uint8_t r = release(c); // Keyup - return (p); // just return the result of press() since release() almost always returns 1 -} - -#endif - -#endif /* if defined(USBCON) */ \ No newline at end of file diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/HardwareSerial.cpp b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/HardwareSerial.cpp deleted file mode 100644 index f40ddee0..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/HardwareSerial.cpp +++ /dev/null @@ -1,428 +0,0 @@ -/* - HardwareSerial.cpp - Hardware serial library for Wiring - Copyright (c) 2006 Nicholas Zambetti. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - - Modified 23 November 2006 by David A. Mellis - Modified 28 September 2010 by Mark Sproul -*/ - -#include -#include -#include -#include -#include "Arduino.h" -#include "wiring_private.h" - -// this next line disables the entire HardwareSerial.cpp, -// this is so I can support Attiny series and any other chip without a uart -#if defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H) - -#include "HardwareSerial.h" - -// Define constants and variables for buffering incoming serial data. We're -// using a ring buffer (I think), in which head is the index of the location -// to which to write the next incoming character and tail is the index of the -// location from which to read. -#if (RAMEND < 1000) - #define SERIAL_BUFFER_SIZE 16 -#else - #define SERIAL_BUFFER_SIZE 64 -#endif - -struct ring_buffer -{ - unsigned char buffer[SERIAL_BUFFER_SIZE]; - volatile unsigned int head; - volatile unsigned int tail; -}; - -#if defined(USBCON) - ring_buffer rx_buffer = { { 0 }, 0, 0}; - ring_buffer tx_buffer = { { 0 }, 0, 0}; -#endif -#if defined(UBRRH) || defined(UBRR0H) - ring_buffer rx_buffer = { { 0 }, 0, 0 }; - ring_buffer tx_buffer = { { 0 }, 0, 0 }; -#endif -#if defined(UBRR1H) - ring_buffer rx_buffer1 = { { 0 }, 0, 0 }; - ring_buffer tx_buffer1 = { { 0 }, 0, 0 }; -#endif -#if defined(UBRR2H) - ring_buffer rx_buffer2 = { { 0 }, 0, 0 }; - ring_buffer tx_buffer2 = { { 0 }, 0, 0 }; -#endif -#if defined(UBRR3H) - ring_buffer rx_buffer3 = { { 0 }, 0, 0 }; - ring_buffer tx_buffer3 = { { 0 }, 0, 0 }; -#endif - -inline void store_char(unsigned char c, ring_buffer *buffer) -{ - int i = (unsigned int)(buffer->head + 1) % SERIAL_BUFFER_SIZE; - - // if we should be storing the received character into the location - // just before the tail (meaning that the head would advance to the - // current location of the tail), we're about to overflow the buffer - // and so we don't write the character or advance the head. - if (i != buffer->tail) { - buffer->buffer[buffer->head] = c; - buffer->head = i; - } -} - -#if !defined(USART0_RX_vect) && defined(USART1_RX_vect) -// do nothing - on the 32u4 the first USART is USART1 -#else -#if !defined(USART_RX_vect) && !defined(SIG_USART0_RECV) && \ - !defined(SIG_UART0_RECV) && !defined(USART0_RX_vect) && \ - !defined(SIG_UART_RECV) - #error "Don't know what the Data Received vector is called for the first UART" -#else - void serialEvent() __attribute__((weak)); - void serialEvent() {} - #define serialEvent_implemented -#if defined(USART_RX_vect) - SIGNAL(USART_RX_vect) -#elif defined(SIG_USART0_RECV) - SIGNAL(SIG_USART0_RECV) -#elif defined(SIG_UART0_RECV) - SIGNAL(SIG_UART0_RECV) -#elif defined(USART0_RX_vect) - SIGNAL(USART0_RX_vect) -#elif defined(SIG_UART_RECV) - SIGNAL(SIG_UART_RECV) -#endif - { - #if defined(UDR0) - unsigned char c = UDR0; - #elif defined(UDR) - unsigned char c = UDR; - #else - #error UDR not defined - #endif - store_char(c, &rx_buffer); - } -#endif -#endif - -#if defined(USART1_RX_vect) - void serialEvent1() __attribute__((weak)); - void serialEvent1() {} - #define serialEvent1_implemented - SIGNAL(USART1_RX_vect) - { - unsigned char c = UDR1; - store_char(c, &rx_buffer1); - } -#elif defined(SIG_USART1_RECV) - #error SIG_USART1_RECV -#endif - -#if defined(USART2_RX_vect) && defined(UDR2) - void serialEvent2() __attribute__((weak)); - void serialEvent2() {} - #define serialEvent2_implemented - SIGNAL(USART2_RX_vect) - { - unsigned char c = UDR2; - store_char(c, &rx_buffer2); - } -#elif defined(SIG_USART2_RECV) - #error SIG_USART2_RECV -#endif - -#if defined(USART3_RX_vect) && defined(UDR3) - void serialEvent3() __attribute__((weak)); - void serialEvent3() {} - #define serialEvent3_implemented - SIGNAL(USART3_RX_vect) - { - unsigned char c = UDR3; - store_char(c, &rx_buffer3); - } -#elif defined(SIG_USART3_RECV) - #error SIG_USART3_RECV -#endif - -void serialEventRun(void) -{ -#ifdef serialEvent_implemented - if (Serial.available()) serialEvent(); -#endif -#ifdef serialEvent1_implemented - if (Serial1.available()) serialEvent1(); -#endif -#ifdef serialEvent2_implemented - if (Serial2.available()) serialEvent2(); -#endif -#ifdef serialEvent3_implemented - if (Serial3.available()) serialEvent3(); -#endif -} - - -#if !defined(USART0_UDRE_vect) && defined(USART1_UDRE_vect) -// do nothing - on the 32u4 the first USART is USART1 -#else -#if !defined(UART0_UDRE_vect) && !defined(UART_UDRE_vect) && !defined(USART0_UDRE_vect) && !defined(USART_UDRE_vect) - #error "Don't know what the Data Register Empty vector is called for the first UART" -#else -#if defined(UART0_UDRE_vect) -ISR(UART0_UDRE_vect) -#elif defined(UART_UDRE_vect) -ISR(UART_UDRE_vect) -#elif defined(USART0_UDRE_vect) -ISR(USART0_UDRE_vect) -#elif defined(USART_UDRE_vect) -ISR(USART_UDRE_vect) -#endif -{ - if (tx_buffer.head == tx_buffer.tail) { - // Buffer empty, so disable interrupts -#if defined(UCSR0B) - cbi(UCSR0B, UDRIE0); -#else - cbi(UCSRB, UDRIE); -#endif - } - else { - // There is more data in the output buffer. Send the next byte - unsigned char c = tx_buffer.buffer[tx_buffer.tail]; - tx_buffer.tail = (tx_buffer.tail + 1) % SERIAL_BUFFER_SIZE; - - #if defined(UDR0) - UDR0 = c; - #elif defined(UDR) - UDR = c; - #else - #error UDR not defined - #endif - } -} -#endif -#endif - -#ifdef USART1_UDRE_vect -ISR(USART1_UDRE_vect) -{ - if (tx_buffer1.head == tx_buffer1.tail) { - // Buffer empty, so disable interrupts - cbi(UCSR1B, UDRIE1); - } - else { - // There is more data in the output buffer. Send the next byte - unsigned char c = tx_buffer1.buffer[tx_buffer1.tail]; - tx_buffer1.tail = (tx_buffer1.tail + 1) % SERIAL_BUFFER_SIZE; - - UDR1 = c; - } -} -#endif - -#ifdef USART2_UDRE_vect -ISR(USART2_UDRE_vect) -{ - if (tx_buffer2.head == tx_buffer2.tail) { - // Buffer empty, so disable interrupts - cbi(UCSR2B, UDRIE2); - } - else { - // There is more data in the output buffer. Send the next byte - unsigned char c = tx_buffer2.buffer[tx_buffer2.tail]; - tx_buffer2.tail = (tx_buffer2.tail + 1) % SERIAL_BUFFER_SIZE; - - UDR2 = c; - } -} -#endif - -#ifdef USART3_UDRE_vect -ISR(USART3_UDRE_vect) -{ - if (tx_buffer3.head == tx_buffer3.tail) { - // Buffer empty, so disable interrupts - cbi(UCSR3B, UDRIE3); - } - else { - // There is more data in the output buffer. Send the next byte - unsigned char c = tx_buffer3.buffer[tx_buffer3.tail]; - tx_buffer3.tail = (tx_buffer3.tail + 1) % SERIAL_BUFFER_SIZE; - - UDR3 = c; - } -} -#endif - - -// Constructors //////////////////////////////////////////////////////////////// - -HardwareSerial::HardwareSerial(ring_buffer *rx_buffer, ring_buffer *tx_buffer, - volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, - volatile uint8_t *ucsra, volatile uint8_t *ucsrb, - volatile uint8_t *udr, - uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udrie, uint8_t u2x) -{ - _rx_buffer = rx_buffer; - _tx_buffer = tx_buffer; - _ubrrh = ubrrh; - _ubrrl = ubrrl; - _ucsra = ucsra; - _ucsrb = ucsrb; - _udr = udr; - _rxen = rxen; - _txen = txen; - _rxcie = rxcie; - _udrie = udrie; - _u2x = u2x; -} - -// Public Methods ////////////////////////////////////////////////////////////// - -void HardwareSerial::begin(unsigned long baud) -{ - uint16_t baud_setting; - bool use_u2x = true; - -#if F_CPU == 16000000UL - // hardcoded exception for compatibility with the bootloader shipped - // with the Duemilanove and previous boards and the firmware on the 8U2 - // on the Uno and Mega 2560. - if (baud == 57600) { - use_u2x = false; - } -#endif - -try_again: - - if (use_u2x) { - *_ucsra = 1 << _u2x; - baud_setting = (F_CPU / 4 / baud - 1) / 2; - } else { - *_ucsra = 0; - baud_setting = (F_CPU / 8 / baud - 1) / 2; - } - - if ((baud_setting > 4095) && use_u2x) - { - use_u2x = false; - goto try_again; - } - - // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register) - *_ubrrh = baud_setting >> 8; - *_ubrrl = baud_setting; - - sbi(*_ucsrb, _rxen); - sbi(*_ucsrb, _txen); - sbi(*_ucsrb, _rxcie); - cbi(*_ucsrb, _udrie); -} - -void HardwareSerial::end() -{ - // wait for transmission of outgoing data - while (_tx_buffer->head != _tx_buffer->tail) - ; - - cbi(*_ucsrb, _rxen); - cbi(*_ucsrb, _txen); - cbi(*_ucsrb, _rxcie); - cbi(*_ucsrb, _udrie); - - // clear any received data - _rx_buffer->head = _rx_buffer->tail; -} - -int HardwareSerial::available(void) -{ - return (unsigned int)(SERIAL_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) % SERIAL_BUFFER_SIZE; -} - -int HardwareSerial::peek(void) -{ - if (_rx_buffer->head == _rx_buffer->tail) { - return -1; - } else { - return _rx_buffer->buffer[_rx_buffer->tail]; - } -} - -int HardwareSerial::read(void) -{ - // if the head isn't ahead of the tail, we don't have any characters - if (_rx_buffer->head == _rx_buffer->tail) { - return -1; - } else { - unsigned char c = _rx_buffer->buffer[_rx_buffer->tail]; - _rx_buffer->tail = (unsigned int)(_rx_buffer->tail + 1) % SERIAL_BUFFER_SIZE; - return c; - } -} - -void HardwareSerial::flush() -{ - while (_tx_buffer->head != _tx_buffer->tail) - ; -} - -size_t HardwareSerial::write(uint8_t c) -{ - int i = (_tx_buffer->head + 1) % SERIAL_BUFFER_SIZE; - - // If the output buffer is full, there's nothing for it other than to - // wait for the interrupt handler to empty it a bit - // ???: return 0 here instead? - while (i == _tx_buffer->tail) - ; - - _tx_buffer->buffer[_tx_buffer->head] = c; - _tx_buffer->head = i; - - sbi(*_ucsrb, _udrie); - - return 1; -} - -HardwareSerial::operator bool() { - return true; -} - -// Preinstantiate Objects ////////////////////////////////////////////////////// - -#if defined(UBRRH) && defined(UBRRL) - HardwareSerial Serial(&rx_buffer, &tx_buffer, &UBRRH, &UBRRL, &UCSRA, &UCSRB, &UDR, RXEN, TXEN, RXCIE, UDRIE, U2X); -#elif defined(UBRR0H) && defined(UBRR0L) - HardwareSerial Serial(&rx_buffer, &tx_buffer, &UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UDR0, RXEN0, TXEN0, RXCIE0, UDRIE0, U2X0); -#elif defined(USBCON) - // do nothing - Serial object and buffers are initialized in CDC code -#else - #error no serial port defined (port 0) -#endif - -#if defined(UBRR1H) - HardwareSerial Serial1(&rx_buffer1, &tx_buffer1, &UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UDR1, RXEN1, TXEN1, RXCIE1, UDRIE1, U2X1); -#endif -#if defined(UBRR2H) - HardwareSerial Serial2(&rx_buffer2, &tx_buffer2, &UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UDR2, RXEN2, TXEN2, RXCIE2, UDRIE2, U2X2); -#endif -#if defined(UBRR3H) - HardwareSerial Serial3(&rx_buffer3, &tx_buffer3, &UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UDR3, RXEN3, TXEN3, RXCIE3, UDRIE3, U2X3); -#endif - -#endif // whole file - diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/HardwareSerial.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/HardwareSerial.h deleted file mode 100644 index bf4924c6..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/HardwareSerial.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - HardwareSerial.h - Hardware serial library for Wiring - Copyright (c) 2006 Nicholas Zambetti. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - - Modified 28 September 2010 by Mark Sproul -*/ - -#ifndef HardwareSerial_h -#define HardwareSerial_h - -#include - -#include "Stream.h" - -struct ring_buffer; - -class HardwareSerial : public Stream -{ - private: - ring_buffer *_rx_buffer; - ring_buffer *_tx_buffer; - volatile uint8_t *_ubrrh; - volatile uint8_t *_ubrrl; - volatile uint8_t *_ucsra; - volatile uint8_t *_ucsrb; - volatile uint8_t *_udr; - uint8_t _rxen; - uint8_t _txen; - uint8_t _rxcie; - uint8_t _udrie; - uint8_t _u2x; - public: - HardwareSerial(ring_buffer *rx_buffer, ring_buffer *tx_buffer, - volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, - volatile uint8_t *ucsra, volatile uint8_t *ucsrb, - volatile uint8_t *udr, - uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udrie, uint8_t u2x); - void begin(unsigned long); - void end(); - virtual int available(void); - virtual int peek(void); - virtual int read(void); - virtual void flush(void); - virtual size_t write(uint8_t); - using Print::write; // pull in write(str) and write(buf, size) from Print - operator bool(); -}; - -#if defined(UBRRH) || defined(UBRR0H) - extern HardwareSerial Serial; -#elif defined(USBCON) - #include "USBAPI.h" -// extern HardwareSerial Serial_; -#endif -#if defined(UBRR1H) - extern HardwareSerial Serial1; -#endif -#if defined(UBRR2H) - extern HardwareSerial Serial2; -#endif -#if defined(UBRR3H) - extern HardwareSerial Serial3; -#endif - -extern void serialEventRun(void) __attribute__((weak)); - -#endif diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/IPAddress.cpp b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/IPAddress.cpp deleted file mode 100644 index fe3deb77..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/IPAddress.cpp +++ /dev/null @@ -1,56 +0,0 @@ - -#include -#include - -IPAddress::IPAddress() -{ - memset(_address, 0, sizeof(_address)); -} - -IPAddress::IPAddress(uint8_t first_octet, uint8_t second_octet, uint8_t third_octet, uint8_t fourth_octet) -{ - _address[0] = first_octet; - _address[1] = second_octet; - _address[2] = third_octet; - _address[3] = fourth_octet; -} - -IPAddress::IPAddress(uint32_t address) -{ - memcpy(_address, &address, sizeof(_address)); -} - -IPAddress::IPAddress(const uint8_t *address) -{ - memcpy(_address, address, sizeof(_address)); -} - -IPAddress& IPAddress::operator=(const uint8_t *address) -{ - memcpy(_address, address, sizeof(_address)); - return *this; -} - -IPAddress& IPAddress::operator=(uint32_t address) -{ - memcpy(_address, (const uint8_t *)&address, sizeof(_address)); - return *this; -} - -bool IPAddress::operator==(const uint8_t* addr) -{ - return memcmp(addr, _address, sizeof(_address)) == 0; -} - -size_t IPAddress::printTo(Print& p) const -{ - size_t n = 0; - for (int i =0; i < 3; i++) - { - n += p.print(_address[i], DEC); - n += p.print('.'); - } - n += p.print(_address[3], DEC); - return n; -} - diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/IPAddress.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/IPAddress.h deleted file mode 100644 index 2585aec0..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/IPAddress.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * - * MIT License: - * Copyright (c) 2011 Adrian McEwen - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * adrianm@mcqn.com 1/1/2011 - */ - -#ifndef IPAddress_h -#define IPAddress_h - -#include - -// A class to make it easier to handle and pass around IP addresses - -class IPAddress : public Printable { -private: - uint8_t _address[4]; // IPv4 address - // Access the raw byte array containing the address. Because this returns a pointer - // to the internal structure rather than a copy of the address this function should only - // be used when you know that the usage of the returned uint8_t* will be transient and not - // stored. - uint8_t* raw_address() { return _address; }; - -public: - // Constructors - IPAddress(); - IPAddress(uint8_t first_octet, uint8_t second_octet, uint8_t third_octet, uint8_t fourth_octet); - IPAddress(uint32_t address); - IPAddress(const uint8_t *address); - - // Overloaded cast operator to allow IPAddress objects to be used where a pointer - // to a four-byte uint8_t array is expected - operator uint32_t() { return *((uint32_t*)_address); }; - bool operator==(const IPAddress& addr) { return (*((uint32_t*)_address)) == (*((uint32_t*)addr._address)); }; - bool operator==(const uint8_t* addr); - - // Overloaded index operator to allow getting and setting individual octets of the address - uint8_t operator[](int index) const { return _address[index]; }; - uint8_t& operator[](int index) { return _address[index]; }; - - // Overloaded copy operators to allow initialisation of IPAddress objects from other types - IPAddress& operator=(const uint8_t *address); - IPAddress& operator=(uint32_t address); - - virtual size_t printTo(Print& p) const; - - friend class EthernetClass; - friend class UDP; - friend class Client; - friend class Server; - friend class DhcpClass; - friend class DNSClient; -}; - -const IPAddress INADDR_NONE(0,0,0,0); - - -#endif diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Platform.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Platform.h deleted file mode 100644 index 8b8f7427..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Platform.h +++ /dev/null @@ -1,23 +0,0 @@ - -#ifndef __PLATFORM_H__ -#define __PLATFORM_H__ - -#include -#include -#include -#include -#include - -typedef unsigned char u8; -typedef unsigned short u16; -typedef unsigned long u32; - -#include "Arduino.h" - -#if defined(USBCON) - #include "USBDesc.h" - #include "USBCore.h" - #include "USBAPI.h" -#endif /* if defined(USBCON) */ - -#endif diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Print.cpp b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Print.cpp deleted file mode 100644 index e541a6ce..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Print.cpp +++ /dev/null @@ -1,263 +0,0 @@ -/* - Print.cpp - Base class that provides print() and println() - Copyright (c) 2008 David A. Mellis. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - - Modified 23 November 2006 by David A. Mellis - */ - -#include -#include -#include -#include -#include "Arduino.h" - -#include "Print.h" - -// Public Methods ////////////////////////////////////////////////////////////// - -/* default implementation: may be overridden */ -size_t Print::write(const uint8_t *buffer, size_t size) -{ - size_t n = 0; - while (size--) { - n += write(*buffer++); - } - return n; -} - -size_t Print::print(const __FlashStringHelper *ifsh) -{ - const char PROGMEM *p = (const char PROGMEM *)ifsh; - size_t n = 0; - while (1) { - unsigned char c = pgm_read_byte(p++); - if (c == 0) break; - n += write(c); - } - return n; -} - -size_t Print::print(const String &s) -{ - size_t n = 0; - for (uint16_t i = 0; i < s.length(); i++) { - n += write(s[i]); - } - return n; -} - -size_t Print::print(const char str[]) -{ - return write(str); -} - -size_t Print::print(char c) -{ - return write(c); -} - -size_t Print::print(unsigned char b, int base) -{ - return print((unsigned long) b, base); -} - -size_t Print::print(int n, int base) -{ - return print((long) n, base); -} - -size_t Print::print(unsigned int n, int base) -{ - return print((unsigned long) n, base); -} - -size_t Print::print(long n, int base) -{ - if (base == 0) { - return write(n); - } else if (base == 10) { - if (n < 0) { - int t = print('-'); - n = -n; - return printNumber(n, 10) + t; - } - return printNumber(n, 10); - } else { - return printNumber(n, base); - } -} - -size_t Print::print(unsigned long n, int base) -{ - if (base == 0) return write(n); - else return printNumber(n, base); -} - -size_t Print::print(double n, int digits) -{ - return printFloat(n, digits); -} - -size_t Print::println(const __FlashStringHelper *ifsh) -{ - size_t n = print(ifsh); - n += println(); - return n; -} - -size_t Print::print(const Printable& x) -{ - return x.printTo(*this); -} - -size_t Print::println(void) -{ - size_t n = print('\r'); - n += print('\n'); - return n; -} - -size_t Print::println(const String &s) -{ - size_t n = print(s); - n += println(); - return n; -} - -size_t Print::println(const char c[]) -{ - size_t n = print(c); - n += println(); - return n; -} - -size_t Print::println(char c) -{ - size_t n = print(c); - n += println(); - return n; -} - -size_t Print::println(unsigned char b, int base) -{ - size_t n = print(b, base); - n += println(); - return n; -} - -size_t Print::println(int num, int base) -{ - size_t n = print(num, base); - n += println(); - return n; -} - -size_t Print::println(unsigned int num, int base) -{ - size_t n = print(num, base); - n += println(); - return n; -} - -size_t Print::println(long num, int base) -{ - size_t n = print(num, base); - n += println(); - return n; -} - -size_t Print::println(unsigned long num, int base) -{ - size_t n = print(num, base); - n += println(); - return n; -} - -size_t Print::println(double num, int digits) -{ - size_t n = print(num, digits); - n += println(); - return n; -} - -size_t Print::println(const Printable& x) -{ - size_t n = print(x); - n += println(); - return n; -} - -// Private Methods ///////////////////////////////////////////////////////////// - -size_t Print::printNumber(unsigned long n, uint8_t base) { - char buf[8 * sizeof(long) + 1]; // Assumes 8-bit chars plus zero byte. - char *str = &buf[sizeof(buf) - 1]; - - *str = '\0'; - - // prevent crash if called with base == 1 - if (base < 2) base = 10; - - do { - unsigned long m = n; - n /= base; - char c = m - base * n; - *--str = c < 10 ? c + '0' : c + 'A' - 10; - } while(n); - - return write(str); -} - -size_t Print::printFloat(double number, uint8_t digits) -{ - size_t n = 0; - - // Handle negative numbers - if (number < 0.0) - { - n += print('-'); - number = -number; - } - - // Round correctly so that print(1.999, 2) prints as "2.00" - double rounding = 0.5; - for (uint8_t i=0; i 0) { - n += print("."); - } - - // Extract digits from the remainder one at a time - while (digits-- > 0) - { - remainder *= 10.0; - int toPrint = int(remainder); - n += print(toPrint); - remainder -= toPrint; - } - - return n; -} diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Print.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Print.h deleted file mode 100644 index 1af6b723..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Print.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - Print.h - Base class that provides print() and println() - Copyright (c) 2008 David A. Mellis. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef Print_h -#define Print_h - -#include -#include // for size_t - -#include "WString.h" -#include "Printable.h" - -#define DEC 10 -#define HEX 16 -#define OCT 8 -#define BIN 2 - -class Print -{ - private: - int write_error; - size_t printNumber(unsigned long, uint8_t); - size_t printFloat(double, uint8_t); - protected: - void setWriteError(int err = 1) { write_error = err; } - public: - Print() : write_error(0) {} - - int getWriteError() { return write_error; } - void clearWriteError() { setWriteError(0); } - - virtual size_t write(uint8_t) = 0; - size_t write(const char *str) { return write((const uint8_t *)str, strlen(str)); } - virtual size_t write(const uint8_t *buffer, size_t size); - - size_t print(const __FlashStringHelper *); - size_t print(const String &); - size_t print(const char[]); - size_t print(char); - size_t print(unsigned char, int = DEC); - size_t print(int, int = DEC); - size_t print(unsigned int, int = DEC); - size_t print(long, int = DEC); - size_t print(unsigned long, int = DEC); - size_t print(double, int = 2); - size_t print(const Printable&); - - size_t println(const __FlashStringHelper *); - size_t println(const String &s); - size_t println(const char[]); - size_t println(char); - size_t println(unsigned char, int = DEC); - size_t println(int, int = DEC); - size_t println(unsigned int, int = DEC); - size_t println(long, int = DEC); - size_t println(unsigned long, int = DEC); - size_t println(double, int = 2); - size_t println(const Printable&); - size_t println(void); -}; - -#endif diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Printable.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Printable.h deleted file mode 100644 index d03c9af6..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Printable.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - Printable.h - Interface class that allows printing of complex types - Copyright (c) 2011 Adrian McEwen. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef Printable_h -#define Printable_h - -#include - -class Print; - -/** The Printable class provides a way for new classes to allow themselves to be printed. - By deriving from Printable and implementing the printTo method, it will then be possible - for users to print out instances of this class by passing them into the usual - Print::print and Print::println methods. -*/ - -class Printable -{ - public: - virtual size_t printTo(Print& p) const = 0; -}; - -#endif - diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Server.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Server.h deleted file mode 100644 index 9674c762..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Server.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef server_h -#define server_h - -class Server : public Print { -public: - virtual void begin() =0; -}; - -#endif diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Stream.cpp b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Stream.cpp deleted file mode 100644 index aafb7fcf..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Stream.cpp +++ /dev/null @@ -1,270 +0,0 @@ -/* - Stream.cpp - adds parsing methods to Stream class - Copyright (c) 2008 David A. Mellis. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - - Created July 2011 - parsing functions based on TextFinder library by Michael Margolis - */ - -#include "Arduino.h" -#include "Stream.h" - -#define PARSE_TIMEOUT 1000 // default number of milli-seconds to wait -#define NO_SKIP_CHAR 1 // a magic char not found in a valid ASCII numeric field - -// private method to read stream with timeout -int Stream::timedRead() -{ - int c; - _startMillis = millis(); - do { - c = read(); - if (c >= 0) return c; - } while(millis() - _startMillis < _timeout); - return -1; // -1 indicates timeout -} - -// private method to peek stream with timeout -int Stream::timedPeek() -{ - int c; - _startMillis = millis(); - do { - c = peek(); - if (c >= 0) return c; - } while(millis() - _startMillis < _timeout); - return -1; // -1 indicates timeout -} - -// returns peek of the next digit in the stream or -1 if timeout -// discards non-numeric characters -int Stream::peekNextDigit() -{ - int c; - while (1) { - c = timedPeek(); - if (c < 0) return c; // timeout - if (c == '-') return c; - if (c >= '0' && c <= '9') return c; - read(); // discard non-numeric - } -} - -// Public Methods -////////////////////////////////////////////////////////////// - -void Stream::setTimeout(unsigned long timeout) // sets the maximum number of milliseconds to wait -{ - _timeout = timeout; -} - - // find returns true if the target string is found -bool Stream::find(char *target) -{ - return findUntil(target, NULL); -} - -// reads data from the stream until the target string of given length is found -// returns true if target string is found, false if timed out -bool Stream::find(char *target, size_t length) -{ - return findUntil(target, length, NULL, 0); -} - -// as find but search ends if the terminator string is found -bool Stream::findUntil(char *target, char *terminator) -{ - return findUntil(target, strlen(target), terminator, strlen(terminator)); -} - -// reads data from the stream until the target string of the given length is found -// search terminated if the terminator string is found -// returns true if target string is found, false if terminated or timed out -bool Stream::findUntil(char *target, size_t targetLen, char *terminator, size_t termLen) -{ - size_t index = 0; // maximum target string length is 64k bytes! - size_t termIndex = 0; - int c; - - if( *target == 0) - return true; // return true if target is a null string - while( (c = timedRead()) > 0){ - - if(c != target[index]) - index = 0; // reset index if any char does not match - - if( c == target[index]){ - //////Serial.print("found "); Serial.write(c); Serial.print("index now"); Serial.println(index+1); - if(++index >= targetLen){ // return true if all chars in the target match - return true; - } - } - - if(termLen > 0 && c == terminator[termIndex]){ - if(++termIndex >= termLen) - return false; // return false if terminate string found before target string - } - else - termIndex = 0; - } - return false; -} - - -// returns the first valid (long) integer value from the current position. -// initial characters that are not digits (or the minus sign) are skipped -// function is terminated by the first character that is not a digit. -long Stream::parseInt() -{ - return parseInt(NO_SKIP_CHAR); // terminate on first non-digit character (or timeout) -} - -// as above but a given skipChar is ignored -// this allows format characters (typically commas) in values to be ignored -long Stream::parseInt(char skipChar) -{ - boolean isNegative = false; - long value = 0; - int c; - - c = peekNextDigit(); - // ignore non numeric leading characters - if(c < 0) - return 0; // zero returned if timeout - - do{ - if(c == skipChar) - ; // ignore this charactor - else if(c == '-') - isNegative = true; - else if(c >= '0' && c <= '9') // is c a digit? - value = value * 10 + c - '0'; - read(); // consume the character we got with peek - c = timedPeek(); - } - while( (c >= '0' && c <= '9') || c == skipChar ); - - if(isNegative) - value = -value; - return value; -} - - -// as parseInt but returns a floating point value -float Stream::parseFloat() -{ - return parseFloat(NO_SKIP_CHAR); -} - -// as above but the given skipChar is ignored -// this allows format characters (typically commas) in values to be ignored -float Stream::parseFloat(char skipChar){ - boolean isNegative = false; - boolean isFraction = false; - long value = 0; - char c; - float fraction = 1.0; - - c = peekNextDigit(); - // ignore non numeric leading characters - if(c < 0) - return 0; // zero returned if timeout - - do{ - if(c == skipChar) - ; // ignore - else if(c == '-') - isNegative = true; - else if (c == '.') - isFraction = true; - else if(c >= '0' && c <= '9') { // is c a digit? - value = value * 10 + c - '0'; - if(isFraction) - fraction *= 0.1; - } - read(); // consume the character we got with peek - c = timedPeek(); - } - while( (c >= '0' && c <= '9') || c == '.' || c == skipChar ); - - if(isNegative) - value = -value; - if(isFraction) - return value * fraction; - else - return value; -} - -// read characters from stream into buffer -// terminates if length characters have been read, or timeout (see setTimeout) -// returns the number of characters placed in the buffer -// the buffer is NOT null terminated. -// -size_t Stream::readBytes(char *buffer, size_t length) -{ - size_t count = 0; - while (count < length) { - int c = timedRead(); - if (c < 0) break; - *buffer++ = (char)c; - count++; - } - return count; -} - - -// as readBytes with terminator character -// terminates if length characters have been read, timeout, or if the terminator character detected -// returns the number of characters placed in the buffer (0 means no valid data found) - -size_t Stream::readBytesUntil(char terminator, char *buffer, size_t length) -{ - if (length < 1) return 0; - size_t index = 0; - while (index < length) { - int c = timedRead(); - if (c < 0 || c == terminator) break; - *buffer++ = (char)c; - index++; - } - return index; // return number of characters, not including null terminator -} - -String Stream::readString() -{ - String ret; - int c = timedRead(); - while (c >= 0) - { - ret += (char)c; - c = timedRead(); - } - return ret; -} - -String Stream::readStringUntil(char terminator) -{ - String ret; - int c = timedRead(); - while (c >= 0 && c != terminator) - { - ret += (char)c; - c = timedRead(); - } - return ret; -} - diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Stream.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Stream.h deleted file mode 100644 index 58bbf752..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Stream.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - Stream.h - base class for character-based streams. - Copyright (c) 2010 David A. Mellis. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - - parsing functions based on TextFinder library by Michael Margolis -*/ - -#ifndef Stream_h -#define Stream_h - -#include -#include "Print.h" - -// compatability macros for testing -/* -#define getInt() parseInt() -#define getInt(skipChar) parseInt(skipchar) -#define getFloat() parseFloat() -#define getFloat(skipChar) parseFloat(skipChar) -#define getString( pre_string, post_string, buffer, length) -readBytesBetween( pre_string, terminator, buffer, length) -*/ - -class Stream : public Print -{ - private: - unsigned long _timeout; // number of milliseconds to wait for the next char before aborting timed read - unsigned long _startMillis; // used for timeout measurement - int timedRead(); // private method to read stream with timeout - int timedPeek(); // private method to peek stream with timeout - int peekNextDigit(); // returns the next numeric digit in the stream or -1 if timeout - - public: - virtual int available() = 0; - virtual int read() = 0; - virtual int peek() = 0; - virtual void flush() = 0; - - Stream() {_timeout=1000;} - -// parsing methods - - void setTimeout(unsigned long timeout); // sets maximum milliseconds to wait for stream data, default is 1 second - - bool find(char *target); // reads data from the stream until the target string is found - // returns true if target string is found, false if timed out (see setTimeout) - - bool find(char *target, size_t length); // reads data from the stream until the target string of given length is found - // returns true if target string is found, false if timed out - - bool findUntil(char *target, char *terminator); // as find but search ends if the terminator string is found - - bool findUntil(char *target, size_t targetLen, char *terminate, size_t termLen); // as above but search ends if the terminate string is found - - - long parseInt(); // returns the first valid (long) integer value from the current position. - // initial characters that are not digits (or the minus sign) are skipped - // integer is terminated by the first character that is not a digit. - - float parseFloat(); // float version of parseInt - - size_t readBytes( char *buffer, size_t length); // read chars from stream into buffer - // terminates if length characters have been read or timeout (see setTimeout) - // returns the number of characters placed in the buffer (0 means no valid data found) - - size_t readBytesUntil( char terminator, char *buffer, size_t length); // as readBytes with terminator character - // terminates if length characters have been read, timeout, or if the terminator character detected - // returns the number of characters placed in the buffer (0 means no valid data found) - - // Arduino String functions to be added here - String readString(); - String readStringUntil(char terminator); - - protected: - long parseInt(char skipChar); // as above but the given skipChar is ignored - // as above but the given skipChar is ignored - // this allows format characters (typically commas) in values to be ignored - - float parseFloat(char skipChar); // as above but the given skipChar is ignored -}; - -#endif diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Tone.cpp b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Tone.cpp deleted file mode 100644 index 20eed3f4..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Tone.cpp +++ /dev/null @@ -1,601 +0,0 @@ -/* Tone.cpp - - A Tone Generator Library - - Written by Brett Hagman - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - -Version Modified By Date Comments -------- ----------- -------- -------- -0001 B Hagman 09/08/02 Initial coding -0002 B Hagman 09/08/18 Multiple pins -0003 B Hagman 09/08/18 Moved initialization from constructor to begin() -0004 B Hagman 09/09/26 Fixed problems with ATmega8 -0005 B Hagman 09/11/23 Scanned prescalars for best fit on 8 bit timers - 09/11/25 Changed pin toggle method to XOR - 09/11/25 Fixed timer0 from being excluded -0006 D Mellis 09/12/29 Replaced objects with functions -0007 M Sproul 10/08/29 Changed #ifdefs from cpu to register -*************************************************/ - -#include -#include -#include "Arduino.h" -#include "pins_arduino.h" - -#if defined(__AVR_ATmega8__) || defined(__AVR_ATmega128__) -#define TCCR2A TCCR2 -#define TCCR2B TCCR2 -#define COM2A1 COM21 -#define COM2A0 COM20 -#define OCR2A OCR2 -#define TIMSK2 TIMSK -#define OCIE2A OCIE2 -#define TIMER2_COMPA_vect TIMER2_COMP_vect -#define TIMSK1 TIMSK -#endif - -// timerx_toggle_count: -// > 0 - duration specified -// = 0 - stopped -// < 0 - infinitely (until stop() method called, or new play() called) - -#if !defined(__AVR_ATmega8__) -volatile long timer0_toggle_count; -volatile uint8_t *timer0_pin_port; -volatile uint8_t timer0_pin_mask; -#endif - -volatile long timer1_toggle_count; -volatile uint8_t *timer1_pin_port; -volatile uint8_t timer1_pin_mask; -volatile long timer2_toggle_count; -volatile uint8_t *timer2_pin_port; -volatile uint8_t timer2_pin_mask; - -#if defined(TIMSK3) -volatile long timer3_toggle_count; -volatile uint8_t *timer3_pin_port; -volatile uint8_t timer3_pin_mask; -#endif - -#if defined(TIMSK4) -volatile long timer4_toggle_count; -volatile uint8_t *timer4_pin_port; -volatile uint8_t timer4_pin_mask; -#endif - -#if defined(TIMSK5) -volatile long timer5_toggle_count; -volatile uint8_t *timer5_pin_port; -volatile uint8_t timer5_pin_mask; -#endif - - -// MLS: This does not make sense, the 3 options are the same -#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) - -#define AVAILABLE_TONE_PINS 1 - -const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 3, 4, 5, 1, 0 */ }; -static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255, 255, 255, 255 */ }; - -#elif defined(__AVR_ATmega8__) - -#define AVAILABLE_TONE_PINS 1 - -const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1 */ }; -static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255 */ }; - -#else - -#define AVAILABLE_TONE_PINS 1 - -// Leave timer 0 to last. -const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1, 0 */ }; -static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255 */ }; - -#endif - - - -static int8_t toneBegin(uint8_t _pin) -{ - int8_t _timer = -1; - - // if we're already using the pin, the timer should be configured. - for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { - if (tone_pins[i] == _pin) { - return pgm_read_byte(tone_pin_to_timer_PGM + i); - } - } - - // search for an unused timer. - for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { - if (tone_pins[i] == 255) { - tone_pins[i] = _pin; - _timer = pgm_read_byte(tone_pin_to_timer_PGM + i); - break; - } - } - - if (_timer != -1) - { - // Set timer specific stuff - // All timers in CTC mode - // 8 bit timers will require changing prescalar values, - // whereas 16 bit timers are set to either ck/1 or ck/64 prescalar - switch (_timer) - { - #if defined(TCCR0A) && defined(TCCR0B) - case 0: - // 8 bit timer - TCCR0A = 0; - TCCR0B = 0; - bitWrite(TCCR0A, WGM01, 1); - bitWrite(TCCR0B, CS00, 1); - timer0_pin_port = portOutputRegister(digitalPinToPort(_pin)); - timer0_pin_mask = digitalPinToBitMask(_pin); - break; - #endif - - #if defined(TCCR1A) && defined(TCCR1B) && defined(WGM12) - case 1: - // 16 bit timer - TCCR1A = 0; - TCCR1B = 0; - bitWrite(TCCR1B, WGM12, 1); - bitWrite(TCCR1B, CS10, 1); - timer1_pin_port = portOutputRegister(digitalPinToPort(_pin)); - timer1_pin_mask = digitalPinToBitMask(_pin); - break; - #endif - - #if defined(TCCR2A) && defined(TCCR2B) - case 2: - // 8 bit timer - TCCR2A = 0; - TCCR2B = 0; - bitWrite(TCCR2A, WGM21, 1); - bitWrite(TCCR2B, CS20, 1); - timer2_pin_port = portOutputRegister(digitalPinToPort(_pin)); - timer2_pin_mask = digitalPinToBitMask(_pin); - break; - #endif - - #if defined(TCCR3A) && defined(TCCR3B) && defined(TIMSK3) - case 3: - // 16 bit timer - TCCR3A = 0; - TCCR3B = 0; - bitWrite(TCCR3B, WGM32, 1); - bitWrite(TCCR3B, CS30, 1); - timer3_pin_port = portOutputRegister(digitalPinToPort(_pin)); - timer3_pin_mask = digitalPinToBitMask(_pin); - break; - #endif - - #if defined(TCCR4A) && defined(TCCR4B) && defined(TIMSK4) - case 4: - // 16 bit timer - TCCR4A = 0; - TCCR4B = 0; - #if defined(WGM42) - bitWrite(TCCR4B, WGM42, 1); - #elif defined(CS43) - #warning this may not be correct - // atmega32u4 - bitWrite(TCCR4B, CS43, 1); - #endif - bitWrite(TCCR4B, CS40, 1); - timer4_pin_port = portOutputRegister(digitalPinToPort(_pin)); - timer4_pin_mask = digitalPinToBitMask(_pin); - break; - #endif - - #if defined(TCCR5A) && defined(TCCR5B) && defined(TIMSK5) - case 5: - // 16 bit timer - TCCR5A = 0; - TCCR5B = 0; - bitWrite(TCCR5B, WGM52, 1); - bitWrite(TCCR5B, CS50, 1); - timer5_pin_port = portOutputRegister(digitalPinToPort(_pin)); - timer5_pin_mask = digitalPinToBitMask(_pin); - break; - #endif - } - } - - return _timer; -} - - - -// frequency (in hertz) and duration (in milliseconds). - -void tone(uint8_t _pin, unsigned int frequency, unsigned long duration) -{ - uint8_t prescalarbits = 0b001; - long toggle_count = 0; - uint32_t ocr = 0; - int8_t _timer; - - _timer = toneBegin(_pin); - - if (_timer >= 0) - { - // Set the pinMode as OUTPUT - pinMode(_pin, OUTPUT); - - // if we are using an 8 bit timer, scan through prescalars to find the best fit - if (_timer == 0 || _timer == 2) - { - ocr = F_CPU / frequency / 2 - 1; - prescalarbits = 0b001; // ck/1: same for both timers - if (ocr > 255) - { - ocr = F_CPU / frequency / 2 / 8 - 1; - prescalarbits = 0b010; // ck/8: same for both timers - - if (_timer == 2 && ocr > 255) - { - ocr = F_CPU / frequency / 2 / 32 - 1; - prescalarbits = 0b011; - } - - if (ocr > 255) - { - ocr = F_CPU / frequency / 2 / 64 - 1; - prescalarbits = _timer == 0 ? 0b011 : 0b100; - - if (_timer == 2 && ocr > 255) - { - ocr = F_CPU / frequency / 2 / 128 - 1; - prescalarbits = 0b101; - } - - if (ocr > 255) - { - ocr = F_CPU / frequency / 2 / 256 - 1; - prescalarbits = _timer == 0 ? 0b100 : 0b110; - if (ocr > 255) - { - // can't do any better than /1024 - ocr = F_CPU / frequency / 2 / 1024 - 1; - prescalarbits = _timer == 0 ? 0b101 : 0b111; - } - } - } - } - -#if defined(TCCR0B) - if (_timer == 0) - { - TCCR0B = prescalarbits; - } - else -#endif -#if defined(TCCR2B) - { - TCCR2B = prescalarbits; - } -#else - { - // dummy place holder to make the above ifdefs work - } -#endif - } - else - { - // two choices for the 16 bit timers: ck/1 or ck/64 - ocr = F_CPU / frequency / 2 - 1; - - prescalarbits = 0b001; - if (ocr > 0xffff) - { - ocr = F_CPU / frequency / 2 / 64 - 1; - prescalarbits = 0b011; - } - - if (_timer == 1) - { -#if defined(TCCR1B) - TCCR1B = (TCCR1B & 0b11111000) | prescalarbits; -#endif - } -#if defined(TCCR3B) - else if (_timer == 3) - TCCR3B = (TCCR3B & 0b11111000) | prescalarbits; -#endif -#if defined(TCCR4B) - else if (_timer == 4) - TCCR4B = (TCCR4B & 0b11111000) | prescalarbits; -#endif -#if defined(TCCR5B) - else if (_timer == 5) - TCCR5B = (TCCR5B & 0b11111000) | prescalarbits; -#endif - - } - - - // Calculate the toggle count - if (duration > 0) - { - toggle_count = 2 * frequency * duration / 1000; - } - else - { - toggle_count = -1; - } - - // Set the OCR for the given timer, - // set the toggle count, - // then turn on the interrupts - switch (_timer) - { - -#if defined(OCR0A) && defined(TIMSK0) && defined(OCIE0A) - case 0: - OCR0A = ocr; - timer0_toggle_count = toggle_count; - bitWrite(TIMSK0, OCIE0A, 1); - break; -#endif - - case 1: -#if defined(OCR1A) && defined(TIMSK1) && defined(OCIE1A) - OCR1A = ocr; - timer1_toggle_count = toggle_count; - bitWrite(TIMSK1, OCIE1A, 1); -#elif defined(OCR1A) && defined(TIMSK) && defined(OCIE1A) - // this combination is for at least the ATmega32 - OCR1A = ocr; - timer1_toggle_count = toggle_count; - bitWrite(TIMSK, OCIE1A, 1); -#endif - break; - -#if defined(OCR2A) && defined(TIMSK2) && defined(OCIE2A) - case 2: - OCR2A = ocr; - timer2_toggle_count = toggle_count; - bitWrite(TIMSK2, OCIE2A, 1); - break; -#endif - -#if defined(TIMSK3) - case 3: - OCR3A = ocr; - timer3_toggle_count = toggle_count; - bitWrite(TIMSK3, OCIE3A, 1); - break; -#endif - -#if defined(TIMSK4) - case 4: - OCR4A = ocr; - timer4_toggle_count = toggle_count; - bitWrite(TIMSK4, OCIE4A, 1); - break; -#endif - -#if defined(OCR5A) && defined(TIMSK5) && defined(OCIE5A) - case 5: - OCR5A = ocr; - timer5_toggle_count = toggle_count; - bitWrite(TIMSK5, OCIE5A, 1); - break; -#endif - - } - } -} - - -// XXX: this function only works properly for timer 2 (the only one we use -// currently). for the others, it should end the tone, but won't restore -// proper PWM functionality for the timer. -void disableTimer(uint8_t _timer) -{ - switch (_timer) - { - case 0: - #if defined(TIMSK0) - TIMSK0 = 0; - #elif defined(TIMSK) - TIMSK = 0; // atmega32 - #endif - break; - -#if defined(TIMSK1) && defined(OCIE1A) - case 1: - bitWrite(TIMSK1, OCIE1A, 0); - break; -#endif - - case 2: - #if defined(TIMSK2) && defined(OCIE2A) - bitWrite(TIMSK2, OCIE2A, 0); // disable interrupt - #endif - #if defined(TCCR2A) && defined(WGM20) - TCCR2A = (1 << WGM20); - #endif - #if defined(TCCR2B) && defined(CS22) - TCCR2B = (TCCR2B & 0b11111000) | (1 << CS22); - #endif - #if defined(OCR2A) - OCR2A = 0; - #endif - break; - -#if defined(TIMSK3) - case 3: - TIMSK3 = 0; - break; -#endif - -#if defined(TIMSK4) - case 4: - TIMSK4 = 0; - break; -#endif - -#if defined(TIMSK5) - case 5: - TIMSK5 = 0; - break; -#endif - } -} - - -void noTone(uint8_t _pin) -{ - int8_t _timer = -1; - - for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { - if (tone_pins[i] == _pin) { - _timer = pgm_read_byte(tone_pin_to_timer_PGM + i); - tone_pins[i] = 255; - } - } - - disableTimer(_timer); - - digitalWrite(_pin, 0); -} - -#if 0 -#if !defined(__AVR_ATmega8__) -ISR(TIMER0_COMPA_vect) -{ - if (timer0_toggle_count != 0) - { - // toggle the pin - *timer0_pin_port ^= timer0_pin_mask; - - if (timer0_toggle_count > 0) - timer0_toggle_count--; - } - else - { - disableTimer(0); - *timer0_pin_port &= ~(timer0_pin_mask); // keep pin low after stop - } -} -#endif - - -ISR(TIMER1_COMPA_vect) -{ - if (timer1_toggle_count != 0) - { - // toggle the pin - *timer1_pin_port ^= timer1_pin_mask; - - if (timer1_toggle_count > 0) - timer1_toggle_count--; - } - else - { - disableTimer(1); - *timer1_pin_port &= ~(timer1_pin_mask); // keep pin low after stop - } -} -#endif - - -ISR(TIMER2_COMPA_vect) -{ - - if (timer2_toggle_count != 0) - { - // toggle the pin - *timer2_pin_port ^= timer2_pin_mask; - - if (timer2_toggle_count > 0) - timer2_toggle_count--; - } - else - { - // need to call noTone() so that the tone_pins[] entry is reset, so the - // timer gets initialized next time we call tone(). - // XXX: this assumes timer 2 is always the first one used. - noTone(tone_pins[0]); -// disableTimer(2); -// *timer2_pin_port &= ~(timer2_pin_mask); // keep pin low after stop - } -} - - - -//#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) -#if 0 - -ISR(TIMER3_COMPA_vect) -{ - if (timer3_toggle_count != 0) - { - // toggle the pin - *timer3_pin_port ^= timer3_pin_mask; - - if (timer3_toggle_count > 0) - timer3_toggle_count--; - } - else - { - disableTimer(3); - *timer3_pin_port &= ~(timer3_pin_mask); // keep pin low after stop - } -} - -ISR(TIMER4_COMPA_vect) -{ - if (timer4_toggle_count != 0) - { - // toggle the pin - *timer4_pin_port ^= timer4_pin_mask; - - if (timer4_toggle_count > 0) - timer4_toggle_count--; - } - else - { - disableTimer(4); - *timer4_pin_port &= ~(timer4_pin_mask); // keep pin low after stop - } -} - -ISR(TIMER5_COMPA_vect) -{ - if (timer5_toggle_count != 0) - { - // toggle the pin - *timer5_pin_port ^= timer5_pin_mask; - - if (timer5_toggle_count > 0) - timer5_toggle_count--; - } - else - { - disableTimer(5); - *timer5_pin_port &= ~(timer5_pin_mask); // keep pin low after stop - } -} - -#endif diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/USBAPI.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/USBAPI.h deleted file mode 100644 index d5abdb69..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/USBAPI.h +++ /dev/null @@ -1,195 +0,0 @@ - - -#ifndef __USBAPI__ -#define __USBAPI__ - -#if defined(USBCON) - -//================================================================================ -//================================================================================ -// USB - -class USBDevice_ -{ -public: - USBDevice_(); - bool configured(); - - void attach(); - void detach(); // Serial port goes down too... - void poll(); -}; -extern USBDevice_ USBDevice; - -//================================================================================ -//================================================================================ -// Serial over CDC (Serial1 is the physical port) - -class Serial_ : public Stream -{ -private: - ring_buffer *_cdc_rx_buffer; -public: - void begin(uint16_t baud_count); - void end(void); - - virtual int available(void); - virtual void accept(void); - virtual int peek(void); - virtual int read(void); - virtual void flush(void); - virtual size_t write(uint8_t); - operator bool(); -}; -extern Serial_ Serial; - -//================================================================================ -//================================================================================ -// Mouse - -#define MOUSE_LEFT 1 -#define MOUSE_RIGHT 2 -#define MOUSE_MIDDLE 4 -#define MOUSE_ALL (MOUSE_LEFT | MOUSE_RIGHT | MOUSE_MIDDLE) - -class Mouse_ -{ -private: - uint8_t _buttons; - void buttons(uint8_t b); -public: - Mouse_(void); - void begin(void); - void end(void); - void click(uint8_t b = MOUSE_LEFT); - void move(signed char x, signed char y, signed char wheel = 0); - void press(uint8_t b = MOUSE_LEFT); // press LEFT by default - void release(uint8_t b = MOUSE_LEFT); // release LEFT by default - bool isPressed(uint8_t b = MOUSE_LEFT); // check LEFT by default -}; -extern Mouse_ Mouse; - -//================================================================================ -//================================================================================ -// Keyboard - -#define KEY_LEFT_CTRL 0x80 -#define KEY_LEFT_SHIFT 0x81 -#define KEY_LEFT_ALT 0x82 -#define KEY_LEFT_GUI 0x83 -#define KEY_RIGHT_CTRL 0x84 -#define KEY_RIGHT_SHIFT 0x85 -#define KEY_RIGHT_ALT 0x86 -#define KEY_RIGHT_GUI 0x87 - -#define KEY_UP_ARROW 0xDA -#define KEY_DOWN_ARROW 0xD9 -#define KEY_LEFT_ARROW 0xD8 -#define KEY_RIGHT_ARROW 0xD7 -#define KEY_BACKSPACE 0xB2 -#define KEY_TAB 0xB3 -#define KEY_RETURN 0xB0 -#define KEY_ESC 0xB1 -#define KEY_INSERT 0xD1 -#define KEY_DELETE 0xD4 -#define KEY_PAGE_UP 0xD3 -#define KEY_PAGE_DOWN 0xD6 -#define KEY_HOME 0xD2 -#define KEY_END 0xD5 -#define KEY_CAPS_LOCK 0xC1 -#define KEY_F1 0xC2 -#define KEY_F2 0xC3 -#define KEY_F3 0xC4 -#define KEY_F4 0xC5 -#define KEY_F5 0xC6 -#define KEY_F6 0xC7 -#define KEY_F7 0xC8 -#define KEY_F8 0xC9 -#define KEY_F9 0xCA -#define KEY_F10 0xCB -#define KEY_F11 0xCC -#define KEY_F12 0xCD - -// Low level key report: up to 6 keys and shift, ctrl etc at once -typedef struct -{ - uint8_t modifiers; - uint8_t reserved; - uint8_t keys[6]; -} KeyReport; - -class Keyboard_ : public Print -{ -private: - KeyReport _keyReport; - void sendReport(KeyReport* keys); -public: - Keyboard_(void); - void begin(void); - void end(void); - virtual size_t write(uint8_t k); - virtual size_t press(uint8_t k); - virtual size_t release(uint8_t k); - virtual void releaseAll(void); -}; -extern Keyboard_ Keyboard; - -//================================================================================ -//================================================================================ -// Low level API - -typedef struct -{ - uint8_t bmRequestType; - uint8_t bRequest; - uint8_t wValueL; - uint8_t wValueH; - uint16_t wIndex; - uint16_t wLength; -} Setup; - -//================================================================================ -//================================================================================ -// HID 'Driver' - -int HID_GetInterface(uint8_t* interfaceNum); -int HID_GetDescriptor(int i); -bool HID_Setup(Setup& setup); -void HID_SendReport(uint8_t id, const void* data, int len); - -//================================================================================ -//================================================================================ -// MSC 'Driver' - -int MSC_GetInterface(uint8_t* interfaceNum); -int MSC_GetDescriptor(int i); -bool MSC_Setup(Setup& setup); -bool MSC_Data(uint8_t rx,uint8_t tx); - -//================================================================================ -//================================================================================ -// CSC 'Driver' - -int CDC_GetInterface(uint8_t* interfaceNum); -int CDC_GetDescriptor(int i); -bool CDC_Setup(Setup& setup); - -//================================================================================ -//================================================================================ - -#define TRANSFER_PGM 0x80 -#define TRANSFER_RELEASE 0x40 -#define TRANSFER_ZERO 0x20 - -int USB_SendControl(uint8_t flags, const void* d, int len); -int USB_RecvControl(void* d, int len); - -uint8_t USB_Available(uint8_t ep); -int USB_Send(uint8_t ep, const void* data, int len); // blocking -int USB_Recv(uint8_t ep, void* data, int len); // non-blocking -int USB_Recv(uint8_t ep); // non-blocking -void USB_Flush(uint8_t ep); - -#endif - -#endif /* if defined(USBCON) */ \ No newline at end of file diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/USBCore.cpp b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/USBCore.cpp deleted file mode 100644 index 6766be61..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/USBCore.cpp +++ /dev/null @@ -1,672 +0,0 @@ - - -/* Copyright (c) 2010, Peter Barrett -** -** Permission to use, copy, modify, and/or distribute this software for -** any purpose with or without fee is hereby granted, provided that the -** above copyright notice and this permission notice appear in all copies. -** -** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL -** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED -** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR -** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES -** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -** SOFTWARE. -*/ - -#include "Platform.h" -#include "USBAPI.h" -#include "USBDesc.h" - -#if defined(USBCON) - -#define EP_TYPE_CONTROL 0x00 -#define EP_TYPE_BULK_IN 0x81 -#define EP_TYPE_BULK_OUT 0x80 -#define EP_TYPE_INTERRUPT_IN 0xC1 -#define EP_TYPE_INTERRUPT_OUT 0xC0 -#define EP_TYPE_ISOCHRONOUS_IN 0x41 -#define EP_TYPE_ISOCHRONOUS_OUT 0x40 - -/** Pulse generation counters to keep track of the number of milliseconds remaining for each pulse type */ -#define TX_RX_LED_PULSE_MS 100 -volatile u8 TxLEDPulse; /**< Milliseconds remaining for data Tx LED pulse */ -volatile u8 RxLEDPulse; /**< Milliseconds remaining for data Rx LED pulse */ - -//================================================================== -//================================================================== - -extern const u16 STRING_LANGUAGE[] PROGMEM; -extern const u16 STRING_IPRODUCT[] PROGMEM; -extern const u16 STRING_IMANUFACTURER[] PROGMEM; -extern const DeviceDescriptor USB_DeviceDescriptor PROGMEM; -extern const DeviceDescriptor USB_DeviceDescriptorA PROGMEM; - -const u16 STRING_LANGUAGE[2] = { - (3<<8) | (2+2), - 0x0409 // English -}; - -const u16 STRING_IPRODUCT[17] = { - (3<<8) | (2+2*16), -#if USB_PID == 0x8036 - 'A','r','d','u','i','n','o',' ','L','e','o','n','a','r','d','o' -#else - 'U','S','B',' ','I','O',' ','B','o','a','r','d',' ',' ',' ',' ' -#endif -}; - -const u16 STRING_IMANUFACTURER[12] = { - (3<<8) | (2+2*11), -#if USB_VID == 0x2341 - 'A','r','d','u','i','n','o',' ','L','L','C' -#else - 'U','n','k','n','o','w','n',' ',' ',' ',' ' -#endif -}; - -#ifdef CDC_ENABLED -#define DEVICE_CLASS 0x02 -#else -#define DEVICE_CLASS 0x00 -#endif - -// DEVICE DESCRIPTOR -const DeviceDescriptor USB_DeviceDescriptor = - D_DEVICE(0x00,0x00,0x00,64,USB_VID,USB_PID,0x100,IMANUFACTURER,IPRODUCT,0,1); - -const DeviceDescriptor USB_DeviceDescriptorA = - D_DEVICE(DEVICE_CLASS,0x00,0x00,64,USB_VID,USB_PID,0x100,IMANUFACTURER,IPRODUCT,0,1); - -//================================================================== -//================================================================== - -volatile u8 _usbConfiguration = 0; - -static inline void WaitIN(void) -{ - while (!(UEINTX & (1< len) - n = len; - len -= n; - { - LockEP lock(ep); - if (ep & TRANSFER_ZERO) - { - while (n--) - Send8(0); - } - else if (ep & TRANSFER_PGM) - { - while (n--) - Send8(pgm_read_byte(data++)); - } - else - { - while (n--) - Send8(*data++); - } - if (!ReadWriteAllowed() || ((len == 0) && (ep & TRANSFER_RELEASE))) // Release full buffer - ReleaseTX(); - } - } - TXLED1; // light the TX LED - TxLEDPulse = TX_RX_LED_PULSE_MS; - return r; -} - -extern const u8 _initEndpoints[] PROGMEM; -const u8 _initEndpoints[] = -{ - 0, - -#ifdef CDC_ENABLED - EP_TYPE_INTERRUPT_IN, // CDC_ENDPOINT_ACM - EP_TYPE_BULK_OUT, // CDC_ENDPOINT_OUT - EP_TYPE_BULK_IN, // CDC_ENDPOINT_IN -#endif - -#ifdef HID_ENABLED - EP_TYPE_INTERRUPT_IN // HID_ENDPOINT_INT -#endif -}; - -#define EP_SINGLE_64 0x32 // EP0 -#define EP_DOUBLE_64 0x36 // Other endpoints - -static -void InitEP(u8 index, u8 type, u8 size) -{ - UENUM = index; - UECONX = 1; - UECFG0X = type; - UECFG1X = size; -} - -static -void InitEndpoints() -{ - for (u8 i = 1; i < sizeof(_initEndpoints); i++) - { - UENUM = i; - UECONX = 1; - UECFG0X = pgm_read_byte(_initEndpoints+i); - UECFG1X = EP_DOUBLE_64; - } - UERST = 0x7E; // And reset them - UERST = 0; -} - -// Handle CLASS_INTERFACE requests -static -bool ClassInterfaceRequest(Setup& setup) -{ - u8 i = setup.wIndex; - -#ifdef CDC_ENABLED - if (CDC_ACM_INTERFACE == i) - return CDC_Setup(setup); -#endif - -#ifdef HID_ENABLED - if (HID_INTERFACE == i) - return HID_Setup(setup); -#endif - return false; -} - -int _cmark; -int _cend; -void InitControl(int end) -{ - SetEP(0); - _cmark = 0; - _cend = end; -} - -static -bool SendControl(u8 d) -{ - if (_cmark < _cend) - { - if (!WaitForINOrOUT()) - return false; - Send8(d); - if (!((_cmark + 1) & 0x3F)) - ClearIN(); // Fifo is full, release this packet - } - _cmark++; - return true; -}; - -// Clipped by _cmark/_cend -int USB_SendControl(u8 flags, const void* d, int len) -{ - int sent = len; - const u8* data = (const u8*)d; - bool pgm = flags & TRANSFER_PGM; - while (len--) - { - u8 c = pgm ? pgm_read_byte(data++) : *data++; - if (!SendControl(c)) - return -1; - } - return sent; -} - -// Does not timeout or cross fifo boundaries -// Will only work for transfers <= 64 bytes -// TODO -int USB_RecvControl(void* d, int len) -{ - WaitOUT(); - Recv((u8*)d,len); - ClearOUT(); - return len; -} - -int SendInterfaces() -{ - int total = 0; - u8 interfaces = 0; - -#ifdef CDC_ENABLED - total = CDC_GetInterface(&interfaces); -#endif - -#ifdef HID_ENABLED - total += HID_GetInterface(&interfaces); -#endif - - return interfaces; -} - -// Construct a dynamic configuration descriptor -// This really needs dynamic endpoint allocation etc -// TODO -static -bool SendConfiguration(int maxlen) -{ - // Count and measure interfaces - InitControl(0); - int interfaces = SendInterfaces(); - ConfigDescriptor config = D_CONFIG(_cmark + sizeof(ConfigDescriptor),interfaces); - - // Now send them - InitControl(maxlen); - USB_SendControl(0,&config,sizeof(ConfigDescriptor)); - SendInterfaces(); - return true; -} - -u8 _cdcComposite = 0; - -static -bool SendDescriptor(Setup& setup) -{ - u8 t = setup.wValueH; - if (USB_CONFIGURATION_DESCRIPTOR_TYPE == t) - return SendConfiguration(setup.wLength); - - InitControl(setup.wLength); -#ifdef HID_ENABLED - if (HID_REPORT_DESCRIPTOR_TYPE == t) - return HID_GetDescriptor(t); -#endif - - u8 desc_length = 0; - const u8* desc_addr = 0; - if (USB_DEVICE_DESCRIPTOR_TYPE == t) - { - if (setup.wLength == 8) - _cdcComposite = 1; - desc_addr = _cdcComposite ? (const u8*)&USB_DeviceDescriptorA : (const u8*)&USB_DeviceDescriptor; - } - else if (USB_STRING_DESCRIPTOR_TYPE == t) - { - if (setup.wValueL == 0) - desc_addr = (const u8*)&STRING_LANGUAGE; - else if (setup.wValueL == IPRODUCT) - desc_addr = (const u8*)&STRING_IPRODUCT; - else if (setup.wValueL == IMANUFACTURER) - desc_addr = (const u8*)&STRING_IMANUFACTURER; - else - return false; - } - - if (desc_addr == 0) - return false; - if (desc_length == 0) - desc_length = pgm_read_byte(desc_addr); - - USB_SendControl(TRANSFER_PGM,desc_addr,desc_length); - return true; -} - -// Endpoint 0 interrupt -ISR(USB_COM_vect) -{ - SetEP(0); - if (!ReceivedSetupInt()) - return; - - Setup setup; - Recv((u8*)&setup,8); - ClearSetupInt(); - - u8 requestType = setup.bmRequestType; - if (requestType & REQUEST_DEVICETOHOST) - WaitIN(); - else - ClearIN(); - - bool ok = true; - if (REQUEST_STANDARD == (requestType & REQUEST_TYPE)) - { - // Standard Requests - u8 r = setup.bRequest; - if (GET_STATUS == r) - { - Send8(0); // TODO - Send8(0); - } - else if (CLEAR_FEATURE == r) - { - } - else if (SET_FEATURE == r) - { - } - else if (SET_ADDRESS == r) - { - WaitIN(); - UDADDR = setup.wValueL | (1<> 8) & 0xFF) - -#define CDC_V1_10 0x0110 -#define CDC_COMMUNICATION_INTERFACE_CLASS 0x02 - -#define CDC_CALL_MANAGEMENT 0x01 -#define CDC_ABSTRACT_CONTROL_MODEL 0x02 -#define CDC_HEADER 0x00 -#define CDC_ABSTRACT_CONTROL_MANAGEMENT 0x02 -#define CDC_UNION 0x06 -#define CDC_CS_INTERFACE 0x24 -#define CDC_CS_ENDPOINT 0x25 -#define CDC_DATA_INTERFACE_CLASS 0x0A - -#define MSC_SUBCLASS_SCSI 0x06 -#define MSC_PROTOCOL_BULK_ONLY 0x50 - -#define HID_HID_DESCRIPTOR_TYPE 0x21 -#define HID_REPORT_DESCRIPTOR_TYPE 0x22 -#define HID_PHYSICAL_DESCRIPTOR_TYPE 0x23 - - -// Device -typedef struct { - u8 len; // 18 - u8 dtype; // 1 USB_DEVICE_DESCRIPTOR_TYPE - u16 usbVersion; // 0x200 - u8 deviceClass; - u8 deviceSubClass; - u8 deviceProtocol; - u8 packetSize0; // Packet 0 - u16 idVendor; - u16 idProduct; - u16 deviceVersion; // 0x100 - u8 iManufacturer; - u8 iProduct; - u8 iSerialNumber; - u8 bNumConfigurations; -} DeviceDescriptor; - -// Config -typedef struct { - u8 len; // 9 - u8 dtype; // 2 - u16 clen; // total length - u8 numInterfaces; - u8 config; - u8 iconfig; - u8 attributes; - u8 maxPower; -} ConfigDescriptor; - -// String - -// Interface -typedef struct -{ - u8 len; // 9 - u8 dtype; // 4 - u8 number; - u8 alternate; - u8 numEndpoints; - u8 interfaceClass; - u8 interfaceSubClass; - u8 protocol; - u8 iInterface; -} InterfaceDescriptor; - -// Endpoint -typedef struct -{ - u8 len; // 7 - u8 dtype; // 5 - u8 addr; - u8 attr; - u16 packetSize; - u8 interval; -} EndpointDescriptor; - -// Interface Association Descriptor -// Used to bind 2 interfaces together in CDC compostite device -typedef struct -{ - u8 len; // 8 - u8 dtype; // 11 - u8 firstInterface; - u8 interfaceCount; - u8 functionClass; - u8 funtionSubClass; - u8 functionProtocol; - u8 iInterface; -} IADDescriptor; - -// CDC CS interface descriptor -typedef struct -{ - u8 len; // 5 - u8 dtype; // 0x24 - u8 subtype; - u8 d0; - u8 d1; -} CDCCSInterfaceDescriptor; - -typedef struct -{ - u8 len; // 4 - u8 dtype; // 0x24 - u8 subtype; - u8 d0; -} CDCCSInterfaceDescriptor4; - -typedef struct -{ - u8 len; - u8 dtype; // 0x24 - u8 subtype; // 1 - u8 bmCapabilities; - u8 bDataInterface; -} CMFunctionalDescriptor; - -typedef struct -{ - u8 len; - u8 dtype; // 0x24 - u8 subtype; // 1 - u8 bmCapabilities; -} ACMFunctionalDescriptor; - -typedef struct -{ - // IAD - IADDescriptor iad; // Only needed on compound device - - // Control - InterfaceDescriptor cif; // - CDCCSInterfaceDescriptor header; - CMFunctionalDescriptor callManagement; // Call Management - ACMFunctionalDescriptor controlManagement; // ACM - CDCCSInterfaceDescriptor functionalDescriptor; // CDC_UNION - EndpointDescriptor cifin; - - // Data - InterfaceDescriptor dif; - EndpointDescriptor in; - EndpointDescriptor out; -} CDCDescriptor; - -typedef struct -{ - InterfaceDescriptor msc; - EndpointDescriptor in; - EndpointDescriptor out; -} MSCDescriptor; - -typedef struct -{ - u8 len; // 9 - u8 dtype; // 0x21 - u8 addr; - u8 versionL; // 0x101 - u8 versionH; // 0x101 - u8 country; - u8 desctype; // 0x22 report - u8 descLenL; - u8 descLenH; -} HIDDescDescriptor; - -typedef struct -{ - InterfaceDescriptor hid; - HIDDescDescriptor desc; - EndpointDescriptor in; -} HIDDescriptor; - - -#define D_DEVICE(_class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs) \ - { 18, 1, 0x200, _class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs } - -#define D_CONFIG(_totalLength,_interfaces) \ - { 9, 2, _totalLength,_interfaces, 1, 0, USB_CONFIG_BUS_POWERED, USB_CONFIG_POWER_MA(500) } - -#define D_INTERFACE(_n,_numEndpoints,_class,_subClass,_protocol) \ - { 9, 4, _n, 0, _numEndpoints, _class,_subClass, _protocol, 0 } - -#define D_ENDPOINT(_addr,_attr,_packetSize, _interval) \ - { 7, 5, _addr,_attr,_packetSize, _interval } - -#define D_IAD(_firstInterface, _count, _class, _subClass, _protocol) \ - { 8, 11, _firstInterface, _count, _class, _subClass, _protocol, 0 } - -#define D_HIDREPORT(_descriptorLength) \ - { 9, 0x21, 0x1, 0x1, 0, 1, 0x22, _descriptorLength, 0 } - -#define D_CDCCS(_subtype,_d0,_d1) { 5, 0x24, _subtype, _d0, _d1 } -#define D_CDCCS4(_subtype,_d0) { 4, 0x24, _subtype, _d0 } - - -#endif \ No newline at end of file diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/USBDesc.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/USBDesc.h deleted file mode 100644 index 900713e0..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/USBDesc.h +++ /dev/null @@ -1,63 +0,0 @@ - - -/* Copyright (c) 2011, Peter Barrett -** -** Permission to use, copy, modify, and/or distribute this software for -** any purpose with or without fee is hereby granted, provided that the -** above copyright notice and this permission notice appear in all copies. -** -** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL -** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED -** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR -** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES -** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -** SOFTWARE. -*/ - -#define CDC_ENABLED -#define HID_ENABLED - - -#ifdef CDC_ENABLED -#define CDC_INTERFACE_COUNT 2 -#define CDC_ENPOINT_COUNT 3 -#else -#define CDC_INTERFACE_COUNT 0 -#define CDC_ENPOINT_COUNT 0 -#endif - -#ifdef HID_ENABLED -#define HID_INTERFACE_COUNT 1 -#define HID_ENPOINT_COUNT 1 -#else -#define HID_INTERFACE_COUNT 0 -#define HID_ENPOINT_COUNT 0 -#endif - -#define CDC_ACM_INTERFACE 0 // CDC ACM -#define CDC_DATA_INTERFACE 1 // CDC Data -#define CDC_FIRST_ENDPOINT 1 -#define CDC_ENDPOINT_ACM (CDC_FIRST_ENDPOINT) // CDC First -#define CDC_ENDPOINT_OUT (CDC_FIRST_ENDPOINT+1) -#define CDC_ENDPOINT_IN (CDC_FIRST_ENDPOINT+2) - -#define HID_INTERFACE (CDC_ACM_INTERFACE + CDC_INTERFACE_COUNT) // HID Interface -#define HID_FIRST_ENDPOINT (CDC_FIRST_ENDPOINT + CDC_ENPOINT_COUNT) -#define HID_ENDPOINT_INT (HID_FIRST_ENDPOINT) - -#define INTERFACE_COUNT (MSC_INTERFACE + MSC_INTERFACE_COUNT) - -#ifdef CDC_ENABLED -#define CDC_RX CDC_ENDPOINT_OUT -#define CDC_TX CDC_ENDPOINT_IN -#endif - -#ifdef HID_ENABLED -#define HID_TX HID_ENDPOINT_INT -#endif - -#define IMANUFACTURER 1 -#define IPRODUCT 2 - diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Udp.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Udp.h deleted file mode 100644 index dc5644b9..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/Udp.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Udp.cpp: Library to send/receive UDP packets. - * - * NOTE: UDP is fast, but has some important limitations (thanks to Warren Gray for mentioning these) - * 1) UDP does not guarantee the order in which assembled UDP packets are received. This - * might not happen often in practice, but in larger network topologies, a UDP - * packet can be received out of sequence. - * 2) UDP does not guard against lost packets - so packets *can* disappear without the sender being - * aware of it. Again, this may not be a concern in practice on small local networks. - * For more information, see http://www.cafeaulait.org/course/week12/35.html - * - * MIT License: - * Copyright (c) 2008 Bjoern Hartmann - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * bjoern@cs.stanford.edu 12/30/2008 - */ - -#ifndef udp_h -#define udp_h - -#include -#include - -class UDP : public Stream { - -public: - virtual uint8_t begin(uint16_t) =0; // initialize, start listening on specified port. Returns 1 if successful, 0 if there are no sockets available to use - virtual void stop() =0; // Finish with the UDP socket - - // Sending UDP packets - - // Start building up a packet to send to the remote host specific in ip and port - // Returns 1 if successful, 0 if there was a problem with the supplied IP address or port - virtual int beginPacket(IPAddress ip, uint16_t port) =0; - // Start building up a packet to send to the remote host specific in host and port - // Returns 1 if successful, 0 if there was a problem resolving the hostname or port - virtual int beginPacket(const char *host, uint16_t port) =0; - // Finish off this packet and send it - // Returns 1 if the packet was sent successfully, 0 if there was an error - virtual int endPacket() =0; - // Write a single byte into the packet - virtual size_t write(uint8_t) =0; - // Write size bytes from buffer into the packet - virtual size_t write(const uint8_t *buffer, size_t size) =0; - - // Start processing the next available incoming packet - // Returns the size of the packet in bytes, or 0 if no packets are available - virtual int parsePacket() =0; - // Number of bytes remaining in the current packet - virtual int available() =0; - // Read a single byte from the current packet - virtual int read() =0; - // Read up to len bytes from the current packet and place them into buffer - // Returns the number of bytes read, or 0 if none are available - virtual int read(unsigned char* buffer, size_t len) =0; - // Read up to len characters from the current packet and place them into buffer - // Returns the number of characters read, or 0 if none are available - virtual int read(char* buffer, size_t len) =0; - // Return the next byte from the current packet without moving on to the next byte - virtual int peek() =0; - virtual void flush() =0; // Finish reading the current packet - - // Return the IP address of the host who sent the current incoming packet - virtual IPAddress remoteIP() =0; - // Return the port of the host who sent the current incoming packet - virtual uint16_t remotePort() =0; -protected: - uint8_t* rawIPAddress(IPAddress& addr) { return addr.raw_address(); }; -}; - -#endif diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/WCharacter.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/WCharacter.h deleted file mode 100644 index 79733b50..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/WCharacter.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - WCharacter.h - Character utility functions for Wiring & Arduino - Copyright (c) 2010 Hernando Barragan. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef Character_h -#define Character_h - -#include - -// WCharacter.h prototypes -inline boolean isAlphaNumeric(int c) __attribute__((always_inline)); -inline boolean isAlpha(int c) __attribute__((always_inline)); -inline boolean isAscii(int c) __attribute__((always_inline)); -inline boolean isWhitespace(int c) __attribute__((always_inline)); -inline boolean isControl(int c) __attribute__((always_inline)); -inline boolean isDigit(int c) __attribute__((always_inline)); -inline boolean isGraph(int c) __attribute__((always_inline)); -inline boolean isLowerCase(int c) __attribute__((always_inline)); -inline boolean isPrintable(int c) __attribute__((always_inline)); -inline boolean isPunct(int c) __attribute__((always_inline)); -inline boolean isSpace(int c) __attribute__((always_inline)); -inline boolean isUpperCase(int c) __attribute__((always_inline)); -inline boolean isHexadecimalDigit(int c) __attribute__((always_inline)); -inline int toAscii(int c) __attribute__((always_inline)); -inline int toLowerCase(int c) __attribute__((always_inline)); -inline int toUpperCase(int c)__attribute__((always_inline)); - - -// Checks for an alphanumeric character. -// It is equivalent to (isalpha(c) || isdigit(c)). -inline boolean isAlphaNumeric(int c) -{ - return ( isalnum(c) == 0 ? false : true); -} - - -// Checks for an alphabetic character. -// It is equivalent to (isupper(c) || islower(c)). -inline boolean isAlpha(int c) -{ - return ( isalpha(c) == 0 ? false : true); -} - - -// Checks whether c is a 7-bit unsigned char value -// that fits into the ASCII character set. -inline boolean isAscii(int c) -{ - return ( isascii (c) == 0 ? false : true); -} - - -// Checks for a blank character, that is, a space or a tab. -inline boolean isWhitespace(int c) -{ - return ( isblank (c) == 0 ? false : true); -} - - -// Checks for a control character. -inline boolean isControl(int c) -{ - return ( iscntrl (c) == 0 ? false : true); -} - - -// Checks for a digit (0 through 9). -inline boolean isDigit(int c) -{ - return ( isdigit (c) == 0 ? false : true); -} - - -// Checks for any printable character except space. -inline boolean isGraph(int c) -{ - return ( isgraph (c) == 0 ? false : true); -} - - -// Checks for a lower-case character. -inline boolean isLowerCase(int c) -{ - return (islower (c) == 0 ? false : true); -} - - -// Checks for any printable character including space. -inline boolean isPrintable(int c) -{ - return ( isprint (c) == 0 ? false : true); -} - - -// Checks for any printable character which is not a space -// or an alphanumeric character. -inline boolean isPunct(int c) -{ - return ( ispunct (c) == 0 ? false : true); -} - - -// Checks for white-space characters. For the avr-libc library, -// these are: space, formfeed ('\f'), newline ('\n'), carriage -// return ('\r'), horizontal tab ('\t'), and vertical tab ('\v'). -inline boolean isSpace(int c) -{ - return ( isspace (c) == 0 ? false : true); -} - - -// Checks for an uppercase letter. -inline boolean isUpperCase(int c) -{ - return ( isupper (c) == 0 ? false : true); -} - - -// Checks for a hexadecimal digits, i.e. one of 0 1 2 3 4 5 6 7 -// 8 9 a b c d e f A B C D E F. -inline boolean isHexadecimalDigit(int c) -{ - return ( isxdigit (c) == 0 ? false : true); -} - - -// Converts c to a 7-bit unsigned char value that fits into the -// ASCII character set, by clearing the high-order bits. -inline int toAscii(int c) -{ - return toascii (c); -} - - -// Warning: -// Many people will be unhappy if you use this function. -// This function will convert accented letters into random -// characters. - -// Converts the letter c to lower case, if possible. -inline int toLowerCase(int c) -{ - return tolower (c); -} - - -// Converts the letter c to upper case, if possible. -inline int toUpperCase(int c) -{ - return toupper (c); -} - -#endif \ No newline at end of file diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/WInterrupts.c b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/WInterrupts.c deleted file mode 100644 index 8f3ec847..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/WInterrupts.c +++ /dev/null @@ -1,298 +0,0 @@ -/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */ - -/* - Part of the Wiring project - http://wiring.uniandes.edu.co - - Copyright (c) 2004-05 Hernando Barragan - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - Modified 24 November 2006 by David A. Mellis - Modified 1 August 2010 by Mark Sproul -*/ - -#include -#include -#include -#include -#include - -#include "wiring_private.h" - -static volatile voidFuncPtr intFunc[EXTERNAL_NUM_INTERRUPTS]; -// volatile static voidFuncPtr twiIntFunc; - -void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) { - if(interruptNum < EXTERNAL_NUM_INTERRUPTS) { - intFunc[interruptNum] = userFunc; - - // Configure the interrupt mode (trigger on low input, any change, rising - // edge, or falling edge). The mode constants were chosen to correspond - // to the configuration bits in the hardware register, so we simply shift - // the mode into place. - - // Enable the interrupt. - - switch (interruptNum) { -#if defined(__AVR_ATmega32U4__) - // I hate doing this, but the register assignment differs between the 1280/2560 - // and the 32U4. Since avrlib defines registers PCMSK1 and PCMSK2 that aren't - // even present on the 32U4 this is the only way to distinguish between them. - case 0: - EICRA = (EICRA & ~((1<= howbig) { - return howsmall; - } - long diff = howbig - howsmall; - return random(diff) + howsmall; -} - -long map(long x, long in_min, long in_max, long out_min, long out_max) -{ - return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min; -} - -unsigned int makeWord(unsigned int w) { return w; } -unsigned int makeWord(unsigned char h, unsigned char l) { return (h << 8) | l; } \ No newline at end of file diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/WString.cpp b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/WString.cpp deleted file mode 100644 index c6839fc0..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/WString.cpp +++ /dev/null @@ -1,645 +0,0 @@ -/* - WString.cpp - String library for Wiring & Arduino - ...mostly rewritten by Paul Stoffregen... - Copyright (c) 2009-10 Hernando Barragan. All rights reserved. - Copyright 2011, Paul Stoffregen, paul@pjrc.com - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#include "WString.h" - - -/*********************************************/ -/* Constructors */ -/*********************************************/ - -String::String(const char *cstr) -{ - init(); - if (cstr) copy(cstr, strlen(cstr)); -} - -String::String(const String &value) -{ - init(); - *this = value; -} - -#ifdef __GXX_EXPERIMENTAL_CXX0X__ -String::String(String &&rval) -{ - init(); - move(rval); -} -String::String(StringSumHelper &&rval) -{ - init(); - move(rval); -} -#endif - -String::String(char c) -{ - init(); - char buf[2]; - buf[0] = c; - buf[1] = 0; - *this = buf; -} - -String::String(unsigned char value, unsigned char base) -{ - init(); - char buf[9]; - utoa(value, buf, base); - *this = buf; -} - -String::String(int value, unsigned char base) -{ - init(); - char buf[18]; - itoa(value, buf, base); - *this = buf; -} - -String::String(unsigned int value, unsigned char base) -{ - init(); - char buf[17]; - utoa(value, buf, base); - *this = buf; -} - -String::String(long value, unsigned char base) -{ - init(); - char buf[34]; - ltoa(value, buf, base); - *this = buf; -} - -String::String(unsigned long value, unsigned char base) -{ - init(); - char buf[33]; - ultoa(value, buf, base); - *this = buf; -} - -String::~String() -{ - free(buffer); -} - -/*********************************************/ -/* Memory Management */ -/*********************************************/ - -inline void String::init(void) -{ - buffer = NULL; - capacity = 0; - len = 0; - flags = 0; -} - -void String::invalidate(void) -{ - if (buffer) free(buffer); - buffer = NULL; - capacity = len = 0; -} - -unsigned char String::reserve(unsigned int size) -{ - if (buffer && capacity >= size) return 1; - if (changeBuffer(size)) { - if (len == 0) buffer[0] = 0; - return 1; - } - return 0; -} - -unsigned char String::changeBuffer(unsigned int maxStrLen) -{ - char *newbuffer = (char *)realloc(buffer, maxStrLen + 1); - if (newbuffer) { - buffer = newbuffer; - capacity = maxStrLen; - return 1; - } - return 0; -} - -/*********************************************/ -/* Copy and Move */ -/*********************************************/ - -String & String::copy(const char *cstr, unsigned int length) -{ - if (!reserve(length)) { - invalidate(); - return *this; - } - len = length; - strcpy(buffer, cstr); - return *this; -} - -#ifdef __GXX_EXPERIMENTAL_CXX0X__ -void String::move(String &rhs) -{ - if (buffer) { - if (capacity >= rhs.len) { - strcpy(buffer, rhs.buffer); - len = rhs.len; - rhs.len = 0; - return; - } else { - free(buffer); - } - } - buffer = rhs.buffer; - capacity = rhs.capacity; - len = rhs.len; - rhs.buffer = NULL; - rhs.capacity = 0; - rhs.len = 0; -} -#endif - -String & String::operator = (const String &rhs) -{ - if (this == &rhs) return *this; - - if (rhs.buffer) copy(rhs.buffer, rhs.len); - else invalidate(); - - return *this; -} - -#ifdef __GXX_EXPERIMENTAL_CXX0X__ -String & String::operator = (String &&rval) -{ - if (this != &rval) move(rval); - return *this; -} - -String & String::operator = (StringSumHelper &&rval) -{ - if (this != &rval) move(rval); - return *this; -} -#endif - -String & String::operator = (const char *cstr) -{ - if (cstr) copy(cstr, strlen(cstr)); - else invalidate(); - - return *this; -} - -/*********************************************/ -/* concat */ -/*********************************************/ - -unsigned char String::concat(const String &s) -{ - return concat(s.buffer, s.len); -} - -unsigned char String::concat(const char *cstr, unsigned int length) -{ - unsigned int newlen = len + length; - if (!cstr) return 0; - if (length == 0) return 1; - if (!reserve(newlen)) return 0; - strcpy(buffer + len, cstr); - len = newlen; - return 1; -} - -unsigned char String::concat(const char *cstr) -{ - if (!cstr) return 0; - return concat(cstr, strlen(cstr)); -} - -unsigned char String::concat(char c) -{ - char buf[2]; - buf[0] = c; - buf[1] = 0; - return concat(buf, 1); -} - -unsigned char String::concat(unsigned char num) -{ - char buf[4]; - itoa(num, buf, 10); - return concat(buf, strlen(buf)); -} - -unsigned char String::concat(int num) -{ - char buf[7]; - itoa(num, buf, 10); - return concat(buf, strlen(buf)); -} - -unsigned char String::concat(unsigned int num) -{ - char buf[6]; - utoa(num, buf, 10); - return concat(buf, strlen(buf)); -} - -unsigned char String::concat(long num) -{ - char buf[12]; - ltoa(num, buf, 10); - return concat(buf, strlen(buf)); -} - -unsigned char String::concat(unsigned long num) -{ - char buf[11]; - ultoa(num, buf, 10); - return concat(buf, strlen(buf)); -} - -/*********************************************/ -/* Concatenate */ -/*********************************************/ - -StringSumHelper & operator + (const StringSumHelper &lhs, const String &rhs) -{ - StringSumHelper &a = const_cast(lhs); - if (!a.concat(rhs.buffer, rhs.len)) a.invalidate(); - return a; -} - -StringSumHelper & operator + (const StringSumHelper &lhs, const char *cstr) -{ - StringSumHelper &a = const_cast(lhs); - if (!cstr || !a.concat(cstr, strlen(cstr))) a.invalidate(); - return a; -} - -StringSumHelper & operator + (const StringSumHelper &lhs, char c) -{ - StringSumHelper &a = const_cast(lhs); - if (!a.concat(c)) a.invalidate(); - return a; -} - -StringSumHelper & operator + (const StringSumHelper &lhs, unsigned char num) -{ - StringSumHelper &a = const_cast(lhs); - if (!a.concat(num)) a.invalidate(); - return a; -} - -StringSumHelper & operator + (const StringSumHelper &lhs, int num) -{ - StringSumHelper &a = const_cast(lhs); - if (!a.concat(num)) a.invalidate(); - return a; -} - -StringSumHelper & operator + (const StringSumHelper &lhs, unsigned int num) -{ - StringSumHelper &a = const_cast(lhs); - if (!a.concat(num)) a.invalidate(); - return a; -} - -StringSumHelper & operator + (const StringSumHelper &lhs, long num) -{ - StringSumHelper &a = const_cast(lhs); - if (!a.concat(num)) a.invalidate(); - return a; -} - -StringSumHelper & operator + (const StringSumHelper &lhs, unsigned long num) -{ - StringSumHelper &a = const_cast(lhs); - if (!a.concat(num)) a.invalidate(); - return a; -} - -/*********************************************/ -/* Comparison */ -/*********************************************/ - -int String::compareTo(const String &s) const -{ - if (!buffer || !s.buffer) { - if (s.buffer && s.len > 0) return 0 - *(unsigned char *)s.buffer; - if (buffer && len > 0) return *(unsigned char *)buffer; - return 0; - } - return strcmp(buffer, s.buffer); -} - -unsigned char String::equals(const String &s2) const -{ - return (len == s2.len && compareTo(s2) == 0); -} - -unsigned char String::equals(const char *cstr) const -{ - if (len == 0) return (cstr == NULL || *cstr == 0); - if (cstr == NULL) return buffer[0] == 0; - return strcmp(buffer, cstr) == 0; -} - -unsigned char String::operator<(const String &rhs) const -{ - return compareTo(rhs) < 0; -} - -unsigned char String::operator>(const String &rhs) const -{ - return compareTo(rhs) > 0; -} - -unsigned char String::operator<=(const String &rhs) const -{ - return compareTo(rhs) <= 0; -} - -unsigned char String::operator>=(const String &rhs) const -{ - return compareTo(rhs) >= 0; -} - -unsigned char String::equalsIgnoreCase( const String &s2 ) const -{ - if (this == &s2) return 1; - if (len != s2.len) return 0; - if (len == 0) return 1; - const char *p1 = buffer; - const char *p2 = s2.buffer; - while (*p1) { - if (tolower(*p1++) != tolower(*p2++)) return 0; - } - return 1; -} - -unsigned char String::startsWith( const String &s2 ) const -{ - if (len < s2.len) return 0; - return startsWith(s2, 0); -} - -unsigned char String::startsWith( const String &s2, unsigned int offset ) const -{ - if (offset > len - s2.len || !buffer || !s2.buffer) return 0; - return strncmp( &buffer[offset], s2.buffer, s2.len ) == 0; -} - -unsigned char String::endsWith( const String &s2 ) const -{ - if ( len < s2.len || !buffer || !s2.buffer) return 0; - return strcmp(&buffer[len - s2.len], s2.buffer) == 0; -} - -/*********************************************/ -/* Character Access */ -/*********************************************/ - -char String::charAt(unsigned int loc) const -{ - return operator[](loc); -} - -void String::setCharAt(unsigned int loc, char c) -{ - if (loc < len) buffer[loc] = c; -} - -char & String::operator[](unsigned int index) -{ - static char dummy_writable_char; - if (index >= len || !buffer) { - dummy_writable_char = 0; - return dummy_writable_char; - } - return buffer[index]; -} - -char String::operator[]( unsigned int index ) const -{ - if (index >= len || !buffer) return 0; - return buffer[index]; -} - -void String::getBytes(unsigned char *buf, unsigned int bufsize, unsigned int index) const -{ - if (!bufsize || !buf) return; - if (index >= len) { - buf[0] = 0; - return; - } - unsigned int n = bufsize - 1; - if (n > len - index) n = len - index; - strncpy((char *)buf, buffer + index, n); - buf[n] = 0; -} - -/*********************************************/ -/* Search */ -/*********************************************/ - -int String::indexOf(char c) const -{ - return indexOf(c, 0); -} - -int String::indexOf( char ch, unsigned int fromIndex ) const -{ - if (fromIndex >= len) return -1; - const char* temp = strchr(buffer + fromIndex, ch); - if (temp == NULL) return -1; - return temp - buffer; -} - -int String::indexOf(const String &s2) const -{ - return indexOf(s2, 0); -} - -int String::indexOf(const String &s2, unsigned int fromIndex) const -{ - if (fromIndex >= len) return -1; - const char *found = strstr(buffer + fromIndex, s2.buffer); - if (found == NULL) return -1; - return found - buffer; -} - -int String::lastIndexOf( char theChar ) const -{ - return lastIndexOf(theChar, len - 1); -} - -int String::lastIndexOf(char ch, unsigned int fromIndex) const -{ - if (fromIndex >= len) return -1; - char tempchar = buffer[fromIndex + 1]; - buffer[fromIndex + 1] = '\0'; - char* temp = strrchr( buffer, ch ); - buffer[fromIndex + 1] = tempchar; - if (temp == NULL) return -1; - return temp - buffer; -} - -int String::lastIndexOf(const String &s2) const -{ - return lastIndexOf(s2, len - s2.len); -} - -int String::lastIndexOf(const String &s2, unsigned int fromIndex) const -{ - if (s2.len == 0 || len == 0 || s2.len > len) return -1; - if (fromIndex >= len) fromIndex = len - 1; - int found = -1; - for (char *p = buffer; p <= buffer + fromIndex; p++) { - p = strstr(p, s2.buffer); - if (!p) break; - if ((unsigned int)(p - buffer) <= fromIndex) found = p - buffer; - } - return found; -} - -String String::substring( unsigned int left ) const -{ - return substring(left, len); -} - -String String::substring(unsigned int left, unsigned int right) const -{ - if (left > right) { - unsigned int temp = right; - right = left; - left = temp; - } - String out; - if (left > len) return out; - if (right > len) right = len; - char temp = buffer[right]; // save the replaced character - buffer[right] = '\0'; - out = buffer + left; // pointer arithmetic - buffer[right] = temp; //restore character - return out; -} - -/*********************************************/ -/* Modification */ -/*********************************************/ - -void String::replace(char find, char replace) -{ - if (!buffer) return; - for (char *p = buffer; *p; p++) { - if (*p == find) *p = replace; - } -} - -void String::replace(const String& find, const String& replace) -{ - if (len == 0 || find.len == 0) return; - int diff = replace.len - find.len; - char *readFrom = buffer; - char *foundAt; - if (diff == 0) { - while ((foundAt = strstr(readFrom, find.buffer)) != NULL) { - memcpy(foundAt, replace.buffer, replace.len); - readFrom = foundAt + replace.len; - } - } else if (diff < 0) { - char *writeTo = buffer; - while ((foundAt = strstr(readFrom, find.buffer)) != NULL) { - unsigned int n = foundAt - readFrom; - memcpy(writeTo, readFrom, n); - writeTo += n; - memcpy(writeTo, replace.buffer, replace.len); - writeTo += replace.len; - readFrom = foundAt + find.len; - len += diff; - } - strcpy(writeTo, readFrom); - } else { - unsigned int size = len; // compute size needed for result - while ((foundAt = strstr(readFrom, find.buffer)) != NULL) { - readFrom = foundAt + find.len; - size += diff; - } - if (size == len) return; - if (size > capacity && !changeBuffer(size)) return; // XXX: tell user! - int index = len - 1; - while (index >= 0 && (index = lastIndexOf(find, index)) >= 0) { - readFrom = buffer + index + find.len; - memmove(readFrom + diff, readFrom, len - (readFrom - buffer)); - len += diff; - buffer[len] = 0; - memcpy(buffer + index, replace.buffer, replace.len); - index--; - } - } -} - -void String::toLowerCase(void) -{ - if (!buffer) return; - for (char *p = buffer; *p; p++) { - *p = tolower(*p); - } -} - -void String::toUpperCase(void) -{ - if (!buffer) return; - for (char *p = buffer; *p; p++) { - *p = toupper(*p); - } -} - -void String::trim(void) -{ - if (!buffer || len == 0) return; - char *begin = buffer; - while (isspace(*begin)) begin++; - char *end = buffer + len - 1; - while (isspace(*end) && end >= begin) end--; - len = end + 1 - begin; - if (begin > buffer) memcpy(buffer, begin, len); - buffer[len] = 0; -} - -/*********************************************/ -/* Parsing / Conversion */ -/*********************************************/ - -long String::toInt(void) const -{ - if (buffer) return atol(buffer); - return 0; -} - - diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/WString.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/WString.h deleted file mode 100644 index 947325e5..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/WString.h +++ /dev/null @@ -1,205 +0,0 @@ -/* - WString.h - String library for Wiring & Arduino - ...mostly rewritten by Paul Stoffregen... - Copyright (c) 2009-10 Hernando Barragan. All right reserved. - Copyright 2011, Paul Stoffregen, paul@pjrc.com - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef String_class_h -#define String_class_h -#ifdef __cplusplus - -#include -#include -#include -#include - -// When compiling programs with this class, the following gcc parameters -// dramatically increase performance and memory (RAM) efficiency, typically -// with little or no increase in code size. -// -felide-constructors -// -std=c++0x - -class __FlashStringHelper; -#define F(string_literal) (reinterpret_cast(PSTR(string_literal))) - -// An inherited class for holding the result of a concatenation. These -// result objects are assumed to be writable by subsequent concatenations. -class StringSumHelper; - -// The string class -class String -{ - // use a function pointer to allow for "if (s)" without the - // complications of an operator bool(). for more information, see: - // http://www.artima.com/cppsource/safebool.html - typedef void (String::*StringIfHelperType)() const; - void StringIfHelper() const {} - -public: - // constructors - // creates a copy of the initial value. - // if the initial value is null or invalid, or if memory allocation - // fails, the string will be marked as invalid (i.e. "if (s)" will - // be false). - String(const char *cstr = ""); - String(const String &str); - #ifdef __GXX_EXPERIMENTAL_CXX0X__ - String(String &&rval); - String(StringSumHelper &&rval); - #endif - explicit String(char c); - explicit String(unsigned char, unsigned char base=10); - explicit String(int, unsigned char base=10); - explicit String(unsigned int, unsigned char base=10); - explicit String(long, unsigned char base=10); - explicit String(unsigned long, unsigned char base=10); - ~String(void); - - // memory management - // return true on success, false on failure (in which case, the string - // is left unchanged). reserve(0), if successful, will validate an - // invalid string (i.e., "if (s)" will be true afterwards) - unsigned char reserve(unsigned int size); - inline unsigned int length(void) const {return len;} - - // creates a copy of the assigned value. if the value is null or - // invalid, or if the memory allocation fails, the string will be - // marked as invalid ("if (s)" will be false). - String & operator = (const String &rhs); - String & operator = (const char *cstr); - #ifdef __GXX_EXPERIMENTAL_CXX0X__ - String & operator = (String &&rval); - String & operator = (StringSumHelper &&rval); - #endif - - // concatenate (works w/ built-in types) - - // returns true on success, false on failure (in which case, the string - // is left unchanged). if the argument is null or invalid, the - // concatenation is considered unsucessful. - unsigned char concat(const String &str); - unsigned char concat(const char *cstr); - unsigned char concat(char c); - unsigned char concat(unsigned char c); - unsigned char concat(int num); - unsigned char concat(unsigned int num); - unsigned char concat(long num); - unsigned char concat(unsigned long num); - - // if there's not enough memory for the concatenated value, the string - // will be left unchanged (but this isn't signalled in any way) - String & operator += (const String &rhs) {concat(rhs); return (*this);} - String & operator += (const char *cstr) {concat(cstr); return (*this);} - String & operator += (char c) {concat(c); return (*this);} - String & operator += (unsigned char num) {concat(num); return (*this);} - String & operator += (int num) {concat(num); return (*this);} - String & operator += (unsigned int num) {concat(num); return (*this);} - String & operator += (long num) {concat(num); return (*this);} - String & operator += (unsigned long num) {concat(num); return (*this);} - - friend StringSumHelper & operator + (const StringSumHelper &lhs, const String &rhs); - friend StringSumHelper & operator + (const StringSumHelper &lhs, const char *cstr); - friend StringSumHelper & operator + (const StringSumHelper &lhs, char c); - friend StringSumHelper & operator + (const StringSumHelper &lhs, unsigned char num); - friend StringSumHelper & operator + (const StringSumHelper &lhs, int num); - friend StringSumHelper & operator + (const StringSumHelper &lhs, unsigned int num); - friend StringSumHelper & operator + (const StringSumHelper &lhs, long num); - friend StringSumHelper & operator + (const StringSumHelper &lhs, unsigned long num); - - // comparison (only works w/ Strings and "strings") - operator StringIfHelperType() const { return buffer ? &String::StringIfHelper : 0; } - int compareTo(const String &s) const; - unsigned char equals(const String &s) const; - unsigned char equals(const char *cstr) const; - unsigned char operator == (const String &rhs) const {return equals(rhs);} - unsigned char operator == (const char *cstr) const {return equals(cstr);} - unsigned char operator != (const String &rhs) const {return !equals(rhs);} - unsigned char operator != (const char *cstr) const {return !equals(cstr);} - unsigned char operator < (const String &rhs) const; - unsigned char operator > (const String &rhs) const; - unsigned char operator <= (const String &rhs) const; - unsigned char operator >= (const String &rhs) const; - unsigned char equalsIgnoreCase(const String &s) const; - unsigned char startsWith( const String &prefix) const; - unsigned char startsWith(const String &prefix, unsigned int offset) const; - unsigned char endsWith(const String &suffix) const; - - // character acccess - char charAt(unsigned int index) const; - void setCharAt(unsigned int index, char c); - char operator [] (unsigned int index) const; - char& operator [] (unsigned int index); - void getBytes(unsigned char *buf, unsigned int bufsize, unsigned int index=0) const; - void toCharArray(char *buf, unsigned int bufsize, unsigned int index=0) const - {getBytes((unsigned char *)buf, bufsize, index);} - - // search - int indexOf( char ch ) const; - int indexOf( char ch, unsigned int fromIndex ) const; - int indexOf( const String &str ) const; - int indexOf( const String &str, unsigned int fromIndex ) const; - int lastIndexOf( char ch ) const; - int lastIndexOf( char ch, unsigned int fromIndex ) const; - int lastIndexOf( const String &str ) const; - int lastIndexOf( const String &str, unsigned int fromIndex ) const; - String substring( unsigned int beginIndex ) const; - String substring( unsigned int beginIndex, unsigned int endIndex ) const; - - // modification - void replace(char find, char replace); - void replace(const String& find, const String& replace); - void toLowerCase(void); - void toUpperCase(void); - void trim(void); - - // parsing/conversion - long toInt(void) const; - -protected: - char *buffer; // the actual char array - unsigned int capacity; // the array length minus one (for the '\0') - unsigned int len; // the String length (not counting the '\0') - unsigned char flags; // unused, for future features -protected: - void init(void); - void invalidate(void); - unsigned char changeBuffer(unsigned int maxStrLen); - unsigned char concat(const char *cstr, unsigned int length); - - // copy and move - String & copy(const char *cstr, unsigned int length); - #ifdef __GXX_EXPERIMENTAL_CXX0X__ - void move(String &rhs); - #endif -}; - -class StringSumHelper : public String -{ -public: - StringSumHelper(const String &s) : String(s) {} - StringSumHelper(const char *p) : String(p) {} - StringSumHelper(char c) : String(c) {} - StringSumHelper(unsigned char num) : String(num) {} - StringSumHelper(int num) : String(num) {} - StringSumHelper(unsigned int num) : String(num) {} - StringSumHelper(long num) : String(num) {} - StringSumHelper(unsigned long num) : String(num) {} -}; - -#endif // __cplusplus -#endif // String_class_h diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/binary.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/binary.h deleted file mode 100644 index af149803..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/binary.h +++ /dev/null @@ -1,515 +0,0 @@ -#ifndef Binary_h -#define Binary_h - -#define B0 0 -#define B00 0 -#define B000 0 -#define B0000 0 -#define B00000 0 -#define B000000 0 -#define B0000000 0 -#define B00000000 0 -#define B1 1 -#define B01 1 -#define B001 1 -#define B0001 1 -#define B00001 1 -#define B000001 1 -#define B0000001 1 -#define B00000001 1 -#define B10 2 -#define B010 2 -#define B0010 2 -#define B00010 2 -#define B000010 2 -#define B0000010 2 -#define B00000010 2 -#define B11 3 -#define B011 3 -#define B0011 3 -#define B00011 3 -#define B000011 3 -#define B0000011 3 -#define B00000011 3 -#define B100 4 -#define B0100 4 -#define B00100 4 -#define B000100 4 -#define B0000100 4 -#define B00000100 4 -#define B101 5 -#define B0101 5 -#define B00101 5 -#define B000101 5 -#define B0000101 5 -#define B00000101 5 -#define B110 6 -#define B0110 6 -#define B00110 6 -#define B000110 6 -#define B0000110 6 -#define B00000110 6 -#define B111 7 -#define B0111 7 -#define B00111 7 -#define B000111 7 -#define B0000111 7 -#define B00000111 7 -#define B1000 8 -#define B01000 8 -#define B001000 8 -#define B0001000 8 -#define B00001000 8 -#define B1001 9 -#define B01001 9 -#define B001001 9 -#define B0001001 9 -#define B00001001 9 -#define B1010 10 -#define B01010 10 -#define B001010 10 -#define B0001010 10 -#define B00001010 10 -#define B1011 11 -#define B01011 11 -#define B001011 11 -#define B0001011 11 -#define B00001011 11 -#define B1100 12 -#define B01100 12 -#define B001100 12 -#define B0001100 12 -#define B00001100 12 -#define B1101 13 -#define B01101 13 -#define B001101 13 -#define B0001101 13 -#define B00001101 13 -#define B1110 14 -#define B01110 14 -#define B001110 14 -#define B0001110 14 -#define B00001110 14 -#define B1111 15 -#define B01111 15 -#define B001111 15 -#define B0001111 15 -#define B00001111 15 -#define B10000 16 -#define B010000 16 -#define B0010000 16 -#define B00010000 16 -#define B10001 17 -#define B010001 17 -#define B0010001 17 -#define B00010001 17 -#define B10010 18 -#define B010010 18 -#define B0010010 18 -#define B00010010 18 -#define B10011 19 -#define B010011 19 -#define B0010011 19 -#define B00010011 19 -#define B10100 20 -#define B010100 20 -#define B0010100 20 -#define B00010100 20 -#define B10101 21 -#define B010101 21 -#define B0010101 21 -#define B00010101 21 -#define B10110 22 -#define B010110 22 -#define B0010110 22 -#define B00010110 22 -#define B10111 23 -#define B010111 23 -#define B0010111 23 -#define B00010111 23 -#define B11000 24 -#define B011000 24 -#define B0011000 24 -#define B00011000 24 -#define B11001 25 -#define B011001 25 -#define B0011001 25 -#define B00011001 25 -#define B11010 26 -#define B011010 26 -#define B0011010 26 -#define B00011010 26 -#define B11011 27 -#define B011011 27 -#define B0011011 27 -#define B00011011 27 -#define B11100 28 -#define B011100 28 -#define B0011100 28 -#define B00011100 28 -#define B11101 29 -#define B011101 29 -#define B0011101 29 -#define B00011101 29 -#define B11110 30 -#define B011110 30 -#define B0011110 30 -#define B00011110 30 -#define B11111 31 -#define B011111 31 -#define B0011111 31 -#define B00011111 31 -#define B100000 32 -#define B0100000 32 -#define B00100000 32 -#define B100001 33 -#define B0100001 33 -#define B00100001 33 -#define B100010 34 -#define B0100010 34 -#define B00100010 34 -#define B100011 35 -#define B0100011 35 -#define B00100011 35 -#define B100100 36 -#define B0100100 36 -#define B00100100 36 -#define B100101 37 -#define B0100101 37 -#define B00100101 37 -#define B100110 38 -#define B0100110 38 -#define B00100110 38 -#define B100111 39 -#define B0100111 39 -#define B00100111 39 -#define B101000 40 -#define B0101000 40 -#define B00101000 40 -#define B101001 41 -#define B0101001 41 -#define B00101001 41 -#define B101010 42 -#define B0101010 42 -#define B00101010 42 -#define B101011 43 -#define B0101011 43 -#define B00101011 43 -#define B101100 44 -#define B0101100 44 -#define B00101100 44 -#define B101101 45 -#define B0101101 45 -#define B00101101 45 -#define B101110 46 -#define B0101110 46 -#define B00101110 46 -#define B101111 47 -#define B0101111 47 -#define B00101111 47 -#define B110000 48 -#define B0110000 48 -#define B00110000 48 -#define B110001 49 -#define B0110001 49 -#define B00110001 49 -#define B110010 50 -#define B0110010 50 -#define B00110010 50 -#define B110011 51 -#define B0110011 51 -#define B00110011 51 -#define B110100 52 -#define B0110100 52 -#define B00110100 52 -#define B110101 53 -#define B0110101 53 -#define B00110101 53 -#define B110110 54 -#define B0110110 54 -#define B00110110 54 -#define B110111 55 -#define B0110111 55 -#define B00110111 55 -#define B111000 56 -#define B0111000 56 -#define B00111000 56 -#define B111001 57 -#define B0111001 57 -#define B00111001 57 -#define B111010 58 -#define B0111010 58 -#define B00111010 58 -#define B111011 59 -#define B0111011 59 -#define B00111011 59 -#define B111100 60 -#define B0111100 60 -#define B00111100 60 -#define B111101 61 -#define B0111101 61 -#define B00111101 61 -#define B111110 62 -#define B0111110 62 -#define B00111110 62 -#define B111111 63 -#define B0111111 63 -#define B00111111 63 -#define B1000000 64 -#define B01000000 64 -#define B1000001 65 -#define B01000001 65 -#define B1000010 66 -#define B01000010 66 -#define B1000011 67 -#define B01000011 67 -#define B1000100 68 -#define B01000100 68 -#define B1000101 69 -#define B01000101 69 -#define B1000110 70 -#define B01000110 70 -#define B1000111 71 -#define B01000111 71 -#define B1001000 72 -#define B01001000 72 -#define B1001001 73 -#define B01001001 73 -#define B1001010 74 -#define B01001010 74 -#define B1001011 75 -#define B01001011 75 -#define B1001100 76 -#define B01001100 76 -#define B1001101 77 -#define B01001101 77 -#define B1001110 78 -#define B01001110 78 -#define B1001111 79 -#define B01001111 79 -#define B1010000 80 -#define B01010000 80 -#define B1010001 81 -#define B01010001 81 -#define B1010010 82 -#define B01010010 82 -#define B1010011 83 -#define B01010011 83 -#define B1010100 84 -#define B01010100 84 -#define B1010101 85 -#define B01010101 85 -#define B1010110 86 -#define B01010110 86 -#define B1010111 87 -#define B01010111 87 -#define B1011000 88 -#define B01011000 88 -#define B1011001 89 -#define B01011001 89 -#define B1011010 90 -#define B01011010 90 -#define B1011011 91 -#define B01011011 91 -#define B1011100 92 -#define B01011100 92 -#define B1011101 93 -#define B01011101 93 -#define B1011110 94 -#define B01011110 94 -#define B1011111 95 -#define B01011111 95 -#define B1100000 96 -#define B01100000 96 -#define B1100001 97 -#define B01100001 97 -#define B1100010 98 -#define B01100010 98 -#define B1100011 99 -#define B01100011 99 -#define B1100100 100 -#define B01100100 100 -#define B1100101 101 -#define B01100101 101 -#define B1100110 102 -#define B01100110 102 -#define B1100111 103 -#define B01100111 103 -#define B1101000 104 -#define B01101000 104 -#define B1101001 105 -#define B01101001 105 -#define B1101010 106 -#define B01101010 106 -#define B1101011 107 -#define B01101011 107 -#define B1101100 108 -#define B01101100 108 -#define B1101101 109 -#define B01101101 109 -#define B1101110 110 -#define B01101110 110 -#define B1101111 111 -#define B01101111 111 -#define B1110000 112 -#define B01110000 112 -#define B1110001 113 -#define B01110001 113 -#define B1110010 114 -#define B01110010 114 -#define B1110011 115 -#define B01110011 115 -#define B1110100 116 -#define B01110100 116 -#define B1110101 117 -#define B01110101 117 -#define B1110110 118 -#define B01110110 118 -#define B1110111 119 -#define B01110111 119 -#define B1111000 120 -#define B01111000 120 -#define B1111001 121 -#define B01111001 121 -#define B1111010 122 -#define B01111010 122 -#define B1111011 123 -#define B01111011 123 -#define B1111100 124 -#define B01111100 124 -#define B1111101 125 -#define B01111101 125 -#define B1111110 126 -#define B01111110 126 -#define B1111111 127 -#define B01111111 127 -#define B10000000 128 -#define B10000001 129 -#define B10000010 130 -#define B10000011 131 -#define B10000100 132 -#define B10000101 133 -#define B10000110 134 -#define B10000111 135 -#define B10001000 136 -#define B10001001 137 -#define B10001010 138 -#define B10001011 139 -#define B10001100 140 -#define B10001101 141 -#define B10001110 142 -#define B10001111 143 -#define B10010000 144 -#define B10010001 145 -#define B10010010 146 -#define B10010011 147 -#define B10010100 148 -#define B10010101 149 -#define B10010110 150 -#define B10010111 151 -#define B10011000 152 -#define B10011001 153 -#define B10011010 154 -#define B10011011 155 -#define B10011100 156 -#define B10011101 157 -#define B10011110 158 -#define B10011111 159 -#define B10100000 160 -#define B10100001 161 -#define B10100010 162 -#define B10100011 163 -#define B10100100 164 -#define B10100101 165 -#define B10100110 166 -#define B10100111 167 -#define B10101000 168 -#define B10101001 169 -#define B10101010 170 -#define B10101011 171 -#define B10101100 172 -#define B10101101 173 -#define B10101110 174 -#define B10101111 175 -#define B10110000 176 -#define B10110001 177 -#define B10110010 178 -#define B10110011 179 -#define B10110100 180 -#define B10110101 181 -#define B10110110 182 -#define B10110111 183 -#define B10111000 184 -#define B10111001 185 -#define B10111010 186 -#define B10111011 187 -#define B10111100 188 -#define B10111101 189 -#define B10111110 190 -#define B10111111 191 -#define B11000000 192 -#define B11000001 193 -#define B11000010 194 -#define B11000011 195 -#define B11000100 196 -#define B11000101 197 -#define B11000110 198 -#define B11000111 199 -#define B11001000 200 -#define B11001001 201 -#define B11001010 202 -#define B11001011 203 -#define B11001100 204 -#define B11001101 205 -#define B11001110 206 -#define B11001111 207 -#define B11010000 208 -#define B11010001 209 -#define B11010010 210 -#define B11010011 211 -#define B11010100 212 -#define B11010101 213 -#define B11010110 214 -#define B11010111 215 -#define B11011000 216 -#define B11011001 217 -#define B11011010 218 -#define B11011011 219 -#define B11011100 220 -#define B11011101 221 -#define B11011110 222 -#define B11011111 223 -#define B11100000 224 -#define B11100001 225 -#define B11100010 226 -#define B11100011 227 -#define B11100100 228 -#define B11100101 229 -#define B11100110 230 -#define B11100111 231 -#define B11101000 232 -#define B11101001 233 -#define B11101010 234 -#define B11101011 235 -#define B11101100 236 -#define B11101101 237 -#define B11101110 238 -#define B11101111 239 -#define B11110000 240 -#define B11110001 241 -#define B11110010 242 -#define B11110011 243 -#define B11110100 244 -#define B11110101 245 -#define B11110110 246 -#define B11110111 247 -#define B11111000 248 -#define B11111001 249 -#define B11111010 250 -#define B11111011 251 -#define B11111100 252 -#define B11111101 253 -#define B11111110 254 -#define B11111111 255 - -#endif diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/main.cpp b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/main.cpp deleted file mode 100644 index 3d4e079d..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/main.cpp +++ /dev/null @@ -1,20 +0,0 @@ -#include - -int main(void) -{ - init(); - -#if defined(USBCON) - USBDevice.attach(); -#endif - - setup(); - - for (;;) { - loop(); - if (serialEventRun) serialEventRun(); - } - - return 0; -} - diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/new.cpp b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/new.cpp deleted file mode 100644 index 0f6d4220..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/new.cpp +++ /dev/null @@ -1,18 +0,0 @@ -#include - -void * operator new(size_t size) -{ - return malloc(size); -} - -void operator delete(void * ptr) -{ - free(ptr); -} - -int __cxa_guard_acquire(__guard *g) {return !*(char *)(g);}; -void __cxa_guard_release (__guard *g) {*(char *)g = 1;}; -void __cxa_guard_abort (__guard *) {}; - -void __cxa_pure_virtual(void) {}; - diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/new.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/new.h deleted file mode 100644 index cd940ce8..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/new.h +++ /dev/null @@ -1,22 +0,0 @@ -/* Header to define new/delete operators as they aren't provided by avr-gcc by default - Taken from http://www.avrfreaks.net/index.php?name=PNphpBB2&file=viewtopic&t=59453 - */ - -#ifndef NEW_H -#define NEW_H - -#include - -void * operator new(size_t size); -void operator delete(void * ptr); - -__extension__ typedef int __guard __attribute__((mode (__DI__))); - -extern "C" int __cxa_guard_acquire(__guard *); -extern "C" void __cxa_guard_release (__guard *); -extern "C" void __cxa_guard_abort (__guard *); - -extern "C" void __cxa_pure_virtual(void); - -#endif - diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring.c b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring.c deleted file mode 100644 index ac8bb6f9..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - wiring.c - Partial implementation of the Wiring API for the ATmega8. - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2005-2006 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - $Id$ -*/ - -#include "wiring_private.h" - -// the prescaler is set so that timer0 ticks every 64 clock cycles, and the -// the overflow handler is called every 256 ticks. -#define MICROSECONDS_PER_TIMER0_OVERFLOW (clockCyclesToMicroseconds(64 * 256)) - -// the whole number of milliseconds per timer0 overflow -#define MILLIS_INC (MICROSECONDS_PER_TIMER0_OVERFLOW / 1000) - -// the fractional number of milliseconds per timer0 overflow. we shift right -// by three to fit these numbers into a byte. (for the clock speeds we care -// about - 8 and 16 MHz - this doesn't lose precision.) -#define FRACT_INC ((MICROSECONDS_PER_TIMER0_OVERFLOW % 1000) >> 3) -#define FRACT_MAX (1000 >> 3) - -volatile unsigned long timer0_overflow_count = 0; -volatile unsigned long timer0_millis = 0; -static unsigned char timer0_fract = 0; - -#if defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) -SIGNAL(TIM0_OVF_vect) -#else -SIGNAL(TIMER0_OVF_vect) -#endif -{ - // copy these to local variables so they can be stored in registers - // (volatile variables must be read from memory on every access) - unsigned long m = timer0_millis; - unsigned char f = timer0_fract; - - m += MILLIS_INC; - f += FRACT_INC; - if (f >= FRACT_MAX) { - f -= FRACT_MAX; - m += 1; - } - - timer0_fract = f; - timer0_millis = m; - timer0_overflow_count++; -} - -unsigned long millis() -{ - unsigned long m; - uint8_t oldSREG = SREG; - - // disable interrupts while we read timer0_millis or we might get an - // inconsistent value (e.g. in the middle of a write to timer0_millis) - cli(); - m = timer0_millis; - SREG = oldSREG; - - return m; -} - -unsigned long micros() { - unsigned long m; - uint8_t oldSREG = SREG, t; - - cli(); - m = timer0_overflow_count; -#if defined(TCNT0) - t = TCNT0; -#elif defined(TCNT0L) - t = TCNT0L; -#else - #error TIMER 0 not defined -#endif - - -#ifdef TIFR0 - if ((TIFR0 & _BV(TOV0)) && (t < 255)) - m++; -#else - if ((TIFR & _BV(TOV0)) && (t < 255)) - m++; -#endif - - SREG = oldSREG; - - return ((m << 8) + t) * (64 / clockCyclesPerMicrosecond()); -} - -void delay(unsigned long ms) -{ - uint16_t start = (uint16_t)micros(); - - while (ms > 0) { - if (((uint16_t)micros() - start) >= 1000) { - ms--; - start += 1000; - } - } -} - -/* Delay for the given number of microseconds. Assumes a 8 or 16 MHz clock. */ -void delayMicroseconds(unsigned int us) -{ - // calling avrlib's delay_us() function with low values (e.g. 1 or - // 2 microseconds) gives delays longer than desired. - //delay_us(us); -#if F_CPU >= 20000000L - // for the 20 MHz clock on rare Arduino boards - - // for a one-microsecond delay, simply wait 2 cycle and return. The overhead - // of the function call yields a delay of exactly a one microsecond. - __asm__ __volatile__ ( - "nop" "\n\t" - "nop"); //just waiting 2 cycle - if (--us == 0) - return; - - // the following loop takes a 1/5 of a microsecond (4 cycles) - // per iteration, so execute it five times for each microsecond of - // delay requested. - us = (us<<2) + us; // x5 us - - // account for the time taken in the preceeding commands. - us -= 2; - -#elif F_CPU >= 16000000L - // for the 16 MHz clock on most Arduino boards - - // for a one-microsecond delay, simply return. the overhead - // of the function call yields a delay of approximately 1 1/8 us. - if (--us == 0) - return; - - // the following loop takes a quarter of a microsecond (4 cycles) - // per iteration, so execute it four times for each microsecond of - // delay requested. - us <<= 2; - - // account for the time taken in the preceeding commands. - us -= 2; -#else - // for the 8 MHz internal clock on the ATmega168 - - // for a one- or two-microsecond delay, simply return. the overhead of - // the function calls takes more than two microseconds. can't just - // subtract two, since us is unsigned; we'd overflow. - if (--us == 0) - return; - if (--us == 0) - return; - - // the following loop takes half of a microsecond (4 cycles) - // per iteration, so execute it twice for each microsecond of - // delay requested. - us <<= 1; - - // partially compensate for the time taken by the preceeding commands. - // we can't subtract any more than this or we'd overflow w/ small delays. - us--; -#endif - - // busy wait - __asm__ __volatile__ ( - "1: sbiw %0,1" "\n\t" // 2 cycles - "brne 1b" : "=w" (us) : "0" (us) // 2 cycles - ); -} - -void init() -{ - // this needs to be called before setup() or some functions won't - // work there - sei(); - - // on the ATmega168, timer 0 is also used for fast hardware pwm - // (using phase-correct PWM would mean that timer 0 overflowed half as often - // resulting in different millis() behavior on the ATmega8 and ATmega168) -#if defined(TCCR0A) && defined(WGM01) - sbi(TCCR0A, WGM01); - sbi(TCCR0A, WGM00); -#endif - - // set timer 0 prescale factor to 64 -#if defined(__AVR_ATmega128__) - // CPU specific: different values for the ATmega128 - sbi(TCCR0, CS02); -#elif defined(TCCR0) && defined(CS01) && defined(CS00) - // this combination is for the standard atmega8 - sbi(TCCR0, CS01); - sbi(TCCR0, CS00); -#elif defined(TCCR0B) && defined(CS01) && defined(CS00) - // this combination is for the standard 168/328/1280/2560 - sbi(TCCR0B, CS01); - sbi(TCCR0B, CS00); -#elif defined(TCCR0A) && defined(CS01) && defined(CS00) - // this combination is for the __AVR_ATmega645__ series - sbi(TCCR0A, CS01); - sbi(TCCR0A, CS00); -#else - #error Timer 0 prescale factor 64 not set correctly -#endif - - // enable timer 0 overflow interrupt -#if defined(TIMSK) && defined(TOIE0) - sbi(TIMSK, TOIE0); -#elif defined(TIMSK0) && defined(TOIE0) - sbi(TIMSK0, TOIE0); -#else - #error Timer 0 overflow interrupt not set correctly -#endif - - // timers 1 and 2 are used for phase-correct hardware pwm - // this is better for motors as it ensures an even waveform - // note, however, that fast pwm mode can achieve a frequency of up - // 8 MHz (with a 16 MHz clock) at 50% duty cycle - -#if defined(TCCR1B) && defined(CS11) && defined(CS10) - TCCR1B = 0; - - // set timer 1 prescale factor to 64 - sbi(TCCR1B, CS11); -#if F_CPU >= 8000000L - sbi(TCCR1B, CS10); -#endif -#elif defined(TCCR1) && defined(CS11) && defined(CS10) - sbi(TCCR1, CS11); -#if F_CPU >= 8000000L - sbi(TCCR1, CS10); -#endif -#endif - // put timer 1 in 8-bit phase correct pwm mode -#if defined(TCCR1A) && defined(WGM10) - sbi(TCCR1A, WGM10); -#elif defined(TCCR1) - #warning this needs to be finished -#endif - - // set timer 2 prescale factor to 64 -#if defined(TCCR2) && defined(CS22) - sbi(TCCR2, CS22); -#elif defined(TCCR2B) && defined(CS22) - sbi(TCCR2B, CS22); -#else - #warning Timer 2 not finished (may not be present on this CPU) -#endif - - // configure timer 2 for phase correct pwm (8-bit) -#if defined(TCCR2) && defined(WGM20) - sbi(TCCR2, WGM20); -#elif defined(TCCR2A) && defined(WGM20) - sbi(TCCR2A, WGM20); -#else - #warning Timer 2 not finished (may not be present on this CPU) -#endif - -#if defined(TCCR3B) && defined(CS31) && defined(WGM30) - sbi(TCCR3B, CS31); // set timer 3 prescale factor to 64 - sbi(TCCR3B, CS30); - sbi(TCCR3A, WGM30); // put timer 3 in 8-bit phase correct pwm mode -#endif - -#if defined(TCCR4A) && defined(TCCR4B) && defined(TCCR4D) /* beginning of timer4 block for 32U4 and similar */ - sbi(TCCR4B, CS42); // set timer4 prescale factor to 64 - sbi(TCCR4B, CS41); - sbi(TCCR4B, CS40); - sbi(TCCR4D, WGM40); // put timer 4 in phase- and frequency-correct PWM mode - sbi(TCCR4A, PWM4A); // enable PWM mode for comparator OCR4A - sbi(TCCR4C, PWM4D); // enable PWM mode for comparator OCR4D -#else /* beginning of timer4 block for ATMEGA1280 and ATMEGA2560 */ -#if defined(TCCR4B) && defined(CS41) && defined(WGM40) - sbi(TCCR4B, CS41); // set timer 4 prescale factor to 64 - sbi(TCCR4B, CS40); - sbi(TCCR4A, WGM40); // put timer 4 in 8-bit phase correct pwm mode -#endif -#endif /* end timer4 block for ATMEGA1280/2560 and similar */ - -#if defined(TCCR5B) && defined(CS51) && defined(WGM50) - sbi(TCCR5B, CS51); // set timer 5 prescale factor to 64 - sbi(TCCR5B, CS50); - sbi(TCCR5A, WGM50); // put timer 5 in 8-bit phase correct pwm mode -#endif - -#if defined(ADCSRA) - // set a2d prescale factor to 128 - // 16 MHz / 128 = 125 KHz, inside the desired 50-200 KHz range. - // XXX: this will not work properly for other clock speeds, and - // this code should use F_CPU to determine the prescale factor. - sbi(ADCSRA, ADPS2); - sbi(ADCSRA, ADPS1); - sbi(ADCSRA, ADPS0); - - // enable a2d conversions - sbi(ADCSRA, ADEN); -#endif - - // the bootloader connects pins 0 and 1 to the USART; disconnect them - // here so they can be used as normal digital i/o; they will be - // reconnected in Serial.begin() -#if defined(UCSRB) - UCSRB = 0; -#elif defined(UCSR0B) - UCSR0B = 0; -#endif -} diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_analog.c b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_analog.c deleted file mode 100644 index 0e9881f6..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_analog.c +++ /dev/null @@ -1,282 +0,0 @@ -/* - wiring_analog.c - analog input and output - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2005-2006 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - Modified 28 September 2010 by Mark Sproul - - $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ -*/ - -#include "wiring_private.h" -#include "pins_arduino.h" - -uint8_t analog_reference = DEFAULT; - -void analogReference(uint8_t mode) -{ - // can't actually set the register here because the default setting - // will connect AVCC and the AREF pin, which would cause a short if - // there's something connected to AREF. - analog_reference = mode; -} - -int analogRead(uint8_t pin) -{ - uint8_t low, high; - -#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) - if (pin >= 54) pin -= 54; // allow for channel or pin numbers -#elif defined(__AVR_ATmega32U4__) - if (pin >= 18) pin -= 18; // allow for channel or pin numbers -#elif defined(__AVR_ATmega1284__) - if (pin >= 24) pin -= 24; // allow for channel or pin numbers -#else - if (pin >= 14) pin -= 14; // allow for channel or pin numbers -#endif - -#if defined(__AVR_ATmega32U4__) - pin = analogPinToChannel(pin); - ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5); -#elif defined(ADCSRB) && defined(MUX5) - // the MUX5 bit of ADCSRB selects whether we're reading from channels - // 0 to 7 (MUX5 low) or 8 to 15 (MUX5 high). - ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5); -#endif - - // set the analog reference (high two bits of ADMUX) and select the - // channel (low 4 bits). this also sets ADLAR (left-adjust result) - // to 0 (the default). -#if defined(ADMUX) - ADMUX = (analog_reference << 6) | (pin & 0x07); -#endif - - // without a delay, we seem to read from the wrong channel - //delay(1); - -#if defined(ADCSRA) && defined(ADCL) - // start the conversion - sbi(ADCSRA, ADSC); - - // ADSC is cleared when the conversion finishes - while (bit_is_set(ADCSRA, ADSC)); - - // we have to read ADCL first; doing so locks both ADCL - // and ADCH until ADCH is read. reading ADCL second would - // cause the results of each conversion to be discarded, - // as ADCL and ADCH would be locked when it completed. - low = ADCL; - high = ADCH; -#else - // we dont have an ADC, return 0 - low = 0; - high = 0; -#endif - - // combine the two bytes - return (high << 8) | low; -} - -// Right now, PWM output only works on the pins with -// hardware support. These are defined in the appropriate -// pins_*.c file. For the rest of the pins, we default -// to digital output. -void analogWrite(uint8_t pin, int val) -{ - // We need to make sure the PWM output is enabled for those pins - // that support it, as we turn it off when digitally reading or - // writing with them. Also, make sure the pin is in output mode - // for consistenty with Wiring, which doesn't require a pinMode - // call for the analog output pins. - pinMode(pin, OUTPUT); - if (val == 0) - { - digitalWrite(pin, LOW); - } - else if (val == 255) - { - digitalWrite(pin, HIGH); - } - else - { - switch(digitalPinToTimer(pin)) - { - // XXX fix needed for atmega8 - #if defined(TCCR0) && defined(COM00) && !defined(__AVR_ATmega8__) - case TIMER0A: - // connect pwm to pin on timer 0 - sbi(TCCR0, COM00); - OCR0 = val; // set pwm duty - break; - #endif - - #if defined(TCCR0A) && defined(COM0A1) - case TIMER0A: - // connect pwm to pin on timer 0, channel A - sbi(TCCR0A, COM0A1); - OCR0A = val; // set pwm duty - break; - #endif - - #if defined(TCCR0A) && defined(COM0B1) - case TIMER0B: - // connect pwm to pin on timer 0, channel B - sbi(TCCR0A, COM0B1); - OCR0B = val; // set pwm duty - break; - #endif - - #if defined(TCCR1A) && defined(COM1A1) - case TIMER1A: - // connect pwm to pin on timer 1, channel A - sbi(TCCR1A, COM1A1); - OCR1A = val; // set pwm duty - break; - #endif - - #if defined(TCCR1A) && defined(COM1B1) - case TIMER1B: - // connect pwm to pin on timer 1, channel B - sbi(TCCR1A, COM1B1); - OCR1B = val; // set pwm duty - break; - #endif - - #if defined(TCCR2) && defined(COM21) - case TIMER2: - // connect pwm to pin on timer 2 - sbi(TCCR2, COM21); - OCR2 = val; // set pwm duty - break; - #endif - - #if defined(TCCR2A) && defined(COM2A1) - case TIMER2A: - // connect pwm to pin on timer 2, channel A - sbi(TCCR2A, COM2A1); - OCR2A = val; // set pwm duty - break; - #endif - - #if defined(TCCR2A) && defined(COM2B1) - case TIMER2B: - // connect pwm to pin on timer 2, channel B - sbi(TCCR2A, COM2B1); - OCR2B = val; // set pwm duty - break; - #endif - - #if defined(TCCR3A) && defined(COM3A1) - case TIMER3A: - // connect pwm to pin on timer 3, channel A - sbi(TCCR3A, COM3A1); - OCR3A = val; // set pwm duty - break; - #endif - - #if defined(TCCR3A) && defined(COM3B1) - case TIMER3B: - // connect pwm to pin on timer 3, channel B - sbi(TCCR3A, COM3B1); - OCR3B = val; // set pwm duty - break; - #endif - - #if defined(TCCR3A) && defined(COM3C1) - case TIMER3C: - // connect pwm to pin on timer 3, channel C - sbi(TCCR3A, COM3C1); - OCR3C = val; // set pwm duty - break; - #endif - - #if defined(TCCR4A) - case TIMER4A: - //connect pwm to pin on timer 4, channel A - sbi(TCCR4A, COM4A1); - #if defined(COM4A0) // only used on 32U4 - cbi(TCCR4A, COM4A0); - #endif - OCR4A = val; // set pwm duty - break; - #endif - - #if defined(TCCR4A) && defined(COM4B1) - case TIMER4B: - // connect pwm to pin on timer 4, channel B - sbi(TCCR4A, COM4B1); - OCR4B = val; // set pwm duty - break; - #endif - - #if defined(TCCR4A) && defined(COM4C1) - case TIMER4C: - // connect pwm to pin on timer 4, channel C - sbi(TCCR4A, COM4C1); - OCR4C = val; // set pwm duty - break; - #endif - - #if defined(TCCR4C) && defined(COM4D1) - case TIMER4D: - // connect pwm to pin on timer 4, channel D - sbi(TCCR4C, COM4D1); - #if defined(COM4D0) // only used on 32U4 - cbi(TCCR4C, COM4D0); - #endif - OCR4D = val; // set pwm duty - break; - #endif - - - #if defined(TCCR5A) && defined(COM5A1) - case TIMER5A: - // connect pwm to pin on timer 5, channel A - sbi(TCCR5A, COM5A1); - OCR5A = val; // set pwm duty - break; - #endif - - #if defined(TCCR5A) && defined(COM5B1) - case TIMER5B: - // connect pwm to pin on timer 5, channel B - sbi(TCCR5A, COM5B1); - OCR5B = val; // set pwm duty - break; - #endif - - #if defined(TCCR5A) && defined(COM5C1) - case TIMER5C: - // connect pwm to pin on timer 5, channel C - sbi(TCCR5A, COM5C1); - OCR5C = val; // set pwm duty - break; - #endif - - case NOT_ON_TIMER: - default: - if (val < 128) { - digitalWrite(pin, LOW); - } else { - digitalWrite(pin, HIGH); - } - } - } -} - diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_digital.c b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_digital.c deleted file mode 100644 index be323b1d..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_digital.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - wiring_digital.c - digital input and output functions - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2005-2006 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - Modified 28 September 2010 by Mark Sproul - - $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ -*/ - -#define ARDUINO_MAIN -#include "wiring_private.h" -#include "pins_arduino.h" - -void pinMode(uint8_t pin, uint8_t mode) -{ - uint8_t bit = digitalPinToBitMask(pin); - uint8_t port = digitalPinToPort(pin); - volatile uint8_t *reg, *out; - - if (port == NOT_A_PIN) return; - - // JWS: can I let the optimizer do this? - reg = portModeRegister(port); - out = portOutputRegister(port); - - if (mode == INPUT) { - uint8_t oldSREG = SREG; - cli(); - *reg &= ~bit; - *out &= ~bit; - SREG = oldSREG; - } else if (mode == INPUT_PULLUP) { - uint8_t oldSREG = SREG; - cli(); - *reg &= ~bit; - *out |= bit; - SREG = oldSREG; - } else { - uint8_t oldSREG = SREG; - cli(); - *reg |= bit; - SREG = oldSREG; - } -} - -// Forcing this inline keeps the callers from having to push their own stuff -// on the stack. It is a good performance win and only takes 1 more byte per -// user than calling. (It will take more bytes on the 168.) -// -// But shouldn't this be moved into pinMode? Seems silly to check and do on -// each digitalread or write. -// -// Mark Sproul: -// - Removed inline. Save 170 bytes on atmega1280 -// - changed to a switch statment; added 32 bytes but much easier to read and maintain. -// - Added more #ifdefs, now compiles for atmega645 -// -//static inline void turnOffPWM(uint8_t timer) __attribute__ ((always_inline)); -//static inline void turnOffPWM(uint8_t timer) -static void turnOffPWM(uint8_t timer) -{ - switch (timer) - { - #if defined(TCCR1A) && defined(COM1A1) - case TIMER1A: cbi(TCCR1A, COM1A1); break; - #endif - #if defined(TCCR1A) && defined(COM1B1) - case TIMER1B: cbi(TCCR1A, COM1B1); break; - #endif - - #if defined(TCCR2) && defined(COM21) - case TIMER2: cbi(TCCR2, COM21); break; - #endif - - #if defined(TCCR0A) && defined(COM0A1) - case TIMER0A: cbi(TCCR0A, COM0A1); break; - #endif - - #if defined(TIMER0B) && defined(COM0B1) - case TIMER0B: cbi(TCCR0A, COM0B1); break; - #endif - #if defined(TCCR2A) && defined(COM2A1) - case TIMER2A: cbi(TCCR2A, COM2A1); break; - #endif - #if defined(TCCR2A) && defined(COM2B1) - case TIMER2B: cbi(TCCR2A, COM2B1); break; - #endif - - #if defined(TCCR3A) && defined(COM3A1) - case TIMER3A: cbi(TCCR3A, COM3A1); break; - #endif - #if defined(TCCR3A) && defined(COM3B1) - case TIMER3B: cbi(TCCR3A, COM3B1); break; - #endif - #if defined(TCCR3A) && defined(COM3C1) - case TIMER3C: cbi(TCCR3A, COM3C1); break; - #endif - - #if defined(TCCR4A) && defined(COM4A1) - case TIMER4A: cbi(TCCR4A, COM4A1); break; - #endif - #if defined(TCCR4A) && defined(COM4B1) - case TIMER4B: cbi(TCCR4A, COM4B1); break; - #endif - #if defined(TCCR4A) && defined(COM4C1) - case TIMER4C: cbi(TCCR4A, COM4C1); break; - #endif - #if defined(TCCR4C) && defined(COM4D1) - case TIMER4D: cbi(TCCR4C, COM4D1); break; - #endif - - #if defined(TCCR5A) - case TIMER5A: cbi(TCCR5A, COM5A1); break; - case TIMER5B: cbi(TCCR5A, COM5B1); break; - case TIMER5C: cbi(TCCR5A, COM5C1); break; - #endif - } -} - -void digitalWrite(uint8_t pin, uint8_t val) -{ - uint8_t timer = digitalPinToTimer(pin); - uint8_t bit = digitalPinToBitMask(pin); - uint8_t port = digitalPinToPort(pin); - volatile uint8_t *out; - - if (port == NOT_A_PIN) return; - - // If the pin that support PWM output, we need to turn it off - // before doing a digital write. - if (timer != NOT_ON_TIMER) turnOffPWM(timer); - - out = portOutputRegister(port); - - uint8_t oldSREG = SREG; - cli(); - - if (val == LOW) { - *out &= ~bit; - } else { - *out |= bit; - } - - SREG = oldSREG; -} - -int digitalRead(uint8_t pin) -{ - uint8_t timer = digitalPinToTimer(pin); - uint8_t bit = digitalPinToBitMask(pin); - uint8_t port = digitalPinToPort(pin); - - if (port == NOT_A_PIN) return LOW; - - // If the pin that support PWM output, we need to turn it off - // before getting a digital reading. - if (timer != NOT_ON_TIMER) turnOffPWM(timer); - - if (*portInputRegister(port) & bit) return HIGH; - return LOW; -} diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_private.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_private.h deleted file mode 100644 index f0ceb0cc..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_private.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - wiring_private.h - Internal header file. - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2005-2006 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - $Id: wiring.h 239 2007-01-12 17:58:39Z mellis $ -*/ - -#ifndef WiringPrivate_h -#define WiringPrivate_h - -#include -#include -#include -#include - -#include "Arduino.h" - -#ifdef __cplusplus -extern "C"{ -#endif - -#ifndef cbi -#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) -#endif -#ifndef sbi -#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) -#endif - -#define EXTERNAL_INT_0 0 -#define EXTERNAL_INT_1 1 -#define EXTERNAL_INT_2 2 -#define EXTERNAL_INT_3 3 -#define EXTERNAL_INT_4 4 -#define EXTERNAL_INT_5 5 -#define EXTERNAL_INT_6 6 -#define EXTERNAL_INT_7 7 - -#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) -#define EXTERNAL_NUM_INTERRUPTS 8 -#elif defined(__AVR_ATmega1284P__) -#define EXTERNAL_NUM_INTERRUPTS 3 -#else -#define EXTERNAL_NUM_INTERRUPTS 2 -#endif - -typedef void (*voidFuncPtr)(void); - -#ifdef __cplusplus -} // extern "C" -#endif - -#endif diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_pulse.c b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_pulse.c deleted file mode 100644 index 0d968865..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_pulse.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - wiring_pulse.c - pulseIn() function - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2005-2006 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ -*/ - -#include "wiring_private.h" -#include "pins_arduino.h" - -/* Measures the length (in microseconds) of a pulse on the pin; state is HIGH - * or LOW, the type of pulse to measure. Works on pulses from 2-3 microseconds - * to 3 minutes in length, but must be called at least a few dozen microseconds - * before the start of the pulse. */ -unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout) -{ - // cache the port and bit of the pin in order to speed up the - // pulse width measuring loop and achieve finer resolution. calling - // digitalRead() instead yields much coarser resolution. - uint8_t bit = digitalPinToBitMask(pin); - uint8_t port = digitalPinToPort(pin); - uint8_t stateMask = (state ? bit : 0); - unsigned long width = 0; // keep initialization out of time critical area - - // convert the timeout from microseconds to a number of times through - // the initial loop; it takes 16 clock cycles per iteration. - unsigned long numloops = 0; - unsigned long maxloops = microsecondsToClockCycles(timeout) / 16; - - // wait for any previous pulse to end - while ((*portInputRegister(port) & bit) == stateMask) - if (numloops++ == maxloops) - return 0; - - // wait for the pulse to start - while ((*portInputRegister(port) & bit) != stateMask) - if (numloops++ == maxloops) - return 0; - - // wait for the pulse to stop - while ((*portInputRegister(port) & bit) == stateMask) { - if (numloops++ == maxloops) - return 0; - width++; - } - - // convert the reading to microseconds. The loop has been determined - // to be 20 clock cycles long and have about 16 clocks between the edge - // and the start of the loop. There will be some error introduced by - // the interrupt handlers. - return clockCyclesToMicroseconds(width * 21 + 16); -} diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_shift.c b/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_shift.c deleted file mode 100644 index cfe78675..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/cores/arduino/wiring_shift.c +++ /dev/null @@ -1,55 +0,0 @@ -/* - wiring_shift.c - shiftOut() function - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2005-2006 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ -*/ - -#include "wiring_private.h" - -uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder) { - uint8_t value = 0; - uint8_t i; - - for (i = 0; i < 8; ++i) { - digitalWrite(clockPin, HIGH); - if (bitOrder == LSBFIRST) - value |= digitalRead(dataPin) << i; - else - value |= digitalRead(dataPin) << (7 - i); - digitalWrite(clockPin, LOW); - } - return value; -} - -void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val) -{ - uint8_t i; - - for (i = 0; i < 8; i++) { - if (bitOrder == LSBFIRST) - digitalWrite(dataPin, !!(val & (1 << i))); - else - digitalWrite(dataPin, !!(val & (1 << (7 - i)))); - - digitalWrite(clockPin, HIGH); - digitalWrite(clockPin, LOW); - } -} diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/variants/eightanaloginputs/pins_arduino.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/variants/eightanaloginputs/pins_arduino.h deleted file mode 100644 index 52b37efc..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/variants/eightanaloginputs/pins_arduino.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - pins_arduino.h - Pin definition functions for Arduino - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2007 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ -*/ - -#include "../standard/pins_arduino.h" -#undef NUM_ANALOG_INPUTS -#define NUM_ANALOG_INPUTS 8 diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/variants/leonardo/pins_arduino.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/variants/leonardo/pins_arduino.h deleted file mode 100644 index 9f770d6c..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/variants/leonardo/pins_arduino.h +++ /dev/null @@ -1,256 +0,0 @@ -/* - pins_arduino.h - Pin definition functions for Arduino - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2007 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ -*/ - -#ifndef Pins_Arduino_h -#define Pins_Arduino_h - -#include - -#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) -#define TXLED0 PORTD |= (1<<5) -#define TXLED1 PORTD &= ~(1<<5) -#define RXLED0 PORTB |= (1<<0) -#define RXLED1 PORTB &= ~(1<<0) - -static const uint8_t SDA = 2; -static const uint8_t SCL = 3; - -// Map SPI port to 'new' pins D14..D17 -static const uint8_t SS = 17; -static const uint8_t MOSI = 16; -static const uint8_t MISO = 14; -static const uint8_t SCK = 15; - -// Mapping of analog pins as digital I/O -// A6-A11 share with digital pins -static const uint8_t A0 = 18; -static const uint8_t A1 = 19; -static const uint8_t A2 = 20; -static const uint8_t A3 = 21; -static const uint8_t A4 = 22; -static const uint8_t A5 = 23; -static const uint8_t A6 = 24; // D4 -static const uint8_t A7 = 25; // D6 -static const uint8_t A8 = 26; // D8 -static const uint8_t A9 = 27; // D9 -static const uint8_t A10 = 28; // D10 -static const uint8_t A11 = 29; // D12 - -#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) -#define digitalPinToPCICRbit(p) 0 -#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) -#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) - -// __AVR_ATmega32U4__ has an unusual mapping of pins to channels -extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; -#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) - -#ifdef ARDUINO_MAIN - -// On the Arduino board, digital pins are also used -// for the analog output (software PWM). Analog input -// pins are a separate set. - -// ATMEL ATMEGA32U4 / ARDUINO LEONARDO -// -// D0 PD2 RXD1/INT2 -// D1 PD3 TXD1/INT3 -// D2 PD1 SDA SDA/INT1 -// D3# PD0 PWM8/SCL OC0B/SCL/INT0 -// D4 A6 PD4 ADC8 -// D5# PC6 ??? OC3A/#OC4A -// D6# A7 PD7 FastPWM #OC4D/ADC10 -// D7 PE6 INT6/AIN0 -// -// D8 A8 PB4 ADC11/PCINT4 -// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 -// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 -// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 -// D12 A11 PD6 T1/#OC4D/ADC9 -// D13# PC7 PWM10 CLK0/OC4A -// -// A0 D18 PF7 ADC7 -// A1 D19 PF6 ADC6 -// A2 D20 PF5 ADC5 -// A3 D21 PF4 ADC4 -// A4 D22 PF1 ADC1 -// A5 D23 PF0 ADC0 -// -// New pins D14..D17 to map SPI port to digital pins -// -// MISO D14 PB3 MISO,PCINT3 -// SCK D15 PB1 SCK,PCINT1 -// MOSI D16 PB2 MOSI,PCINT2 -// SS D17 PB0 RXLED,SS/PCINT0 -// -// TXLED PD5 -// RXLED PB0 -// HWB PE2 HWB - -// these arrays map port names (e.g. port B) to the -// appropriate addresses for various functions (e.g. reading -// and writing) -const uint16_t PROGMEM port_to_mode_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &DDRB, - (uint16_t) &DDRC, - (uint16_t) &DDRD, - (uint16_t) &DDRE, - (uint16_t) &DDRF, -}; - -const uint16_t PROGMEM port_to_output_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PORTB, - (uint16_t) &PORTC, - (uint16_t) &PORTD, - (uint16_t) &PORTE, - (uint16_t) &PORTF, -}; - -const uint16_t PROGMEM port_to_input_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PINB, - (uint16_t) &PINC, - (uint16_t) &PIND, - (uint16_t) &PINE, - (uint16_t) &PINF, -}; - -const uint8_t PROGMEM digital_pin_to_port_PGM[30] = { - PD, // D0 - PD2 - PD, // D1 - PD3 - PD, // D2 - PD1 - PD, // D3 - PD0 - PD, // D4 - PD4 - PC, // D5 - PC6 - PD, // D6 - PD7 - PE, // D7 - PE6 - - PB, // D8 - PB4 - PB, // D9 - PB5 - PB, // D10 - PB6 - PB, // D11 - PB7 - PD, // D12 - PD6 - PC, // D13 - PC7 - - PB, // D14 - MISO - PB3 - PB, // D15 - SCK - PB1 - PB, // D16 - MOSI - PB2 - PB, // D17 - SS - PB0 - - PF, // D18 - A0 - PF7 - PF, // D19 - A1 - PF6 - PF, // D20 - A2 - PF5 - PF, // D21 - A3 - PF4 - PF, // D22 - A4 - PF1 - PF, // D23 - A5 - PF0 - - PD, // D24 / D4 - A6 - PD4 - PD, // D25 / D6 - A7 - PD7 - PB, // D26 / D8 - A8 - PB4 - PB, // D27 / D9 - A9 - PB5 - PB, // D28 / D10 - A10 - PB6 - PD, // D29 / D12 - A11 - PD6 -}; - -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[30] = { - _BV(2), // D0 - PD2 - _BV(3), // D1 - PD3 - _BV(1), // D2 - PD1 - _BV(0), // D3 - PD0 - _BV(4), // D4 - PD4 - _BV(6), // D5 - PC6 - _BV(7), // D6 - PD7 - _BV(6), // D7 - PE6 - - _BV(4), // D8 - PB4 - _BV(5), // D9 - PB5 - _BV(6), // D10 - PB6 - _BV(7), // D11 - PB7 - _BV(6), // D12 - PD6 - _BV(7), // D13 - PC7 - - _BV(3), // D14 - MISO - PB3 - _BV(1), // D15 - SCK - PB1 - _BV(2), // D16 - MOSI - PB2 - _BV(0), // D17 - SS - PB0 - - _BV(7), // D18 - A0 - PF7 - _BV(6), // D19 - A1 - PF6 - _BV(5), // D20 - A2 - PF5 - _BV(4), // D21 - A3 - PF4 - _BV(1), // D22 - A4 - PF1 - _BV(0), // D23 - A5 - PF0 - - _BV(4), // D24 / D4 - A6 - PD4 - _BV(7), // D25 / D6 - A7 - PD7 - _BV(4), // D26 / D8 - A8 - PB4 - _BV(5), // D27 / D9 - A9 - PB5 - _BV(6), // D28 / D10 - A10 - PB6 - _BV(6), // D29 / D12 - A11 - PD6 -}; - -const uint8_t PROGMEM digital_pin_to_timer_PGM[16] = { - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - TIMER0B, /* 3 */ - NOT_ON_TIMER, - TIMER3A, /* 5 */ - TIMER4D, /* 6 */ - NOT_ON_TIMER, - - NOT_ON_TIMER, - TIMER1A, /* 9 */ - TIMER1B, /* 10 */ - TIMER0A, /* 11 */ - - NOT_ON_TIMER, - TIMER4A, /* 13 */ - - NOT_ON_TIMER, - NOT_ON_TIMER, -}; - -const uint8_t PROGMEM analog_pin_to_channel_PGM[12] = { - 7, // A0 PF7 ADC7 - 6, // A1 PF6 ADC6 - 5, // A2 PF5 ADC5 - 4, // A3 PF4 ADC4 - 1, // A4 PF1 ADC1 - 0, // A5 PF0 ADC0 - 8, // A6 D4 PD4 ADC8 - 10, // A7 D6 PD7 ADC10 - 11, // A8 D8 PB4 ADC11 - 12, // A9 D9 PB5 ADC12 - 13, // A10 D10 PB6 ADC13 - 9 // A11 D12 PD6 ADC9 -}; - -#endif /* ARDUINO_MAIN */ -#endif /* Pins_Arduino_h */ diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/variants/mega/pins_arduino.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/variants/mega/pins_arduino.h deleted file mode 100644 index 5a9b4cb0..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/variants/mega/pins_arduino.h +++ /dev/null @@ -1,363 +0,0 @@ -/* - pins_arduino.h - Pin definition functions for Arduino - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2007 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ -*/ - -#ifndef Pins_Arduino_h -#define Pins_Arduino_h - -#include - -#define NUM_DIGITAL_PINS 70 -#define NUM_ANALOG_INPUTS 16 -#define analogInputToDigitalPin(p) ((p < 16) ? (p) + 54 : -1) -#define digitalPinHasPWM(p) (((p) >= 2 && (p) <= 13) || ((p) >= 44 && (p)<= 46)) - -static const uint8_t SS = 53; -static const uint8_t MOSI = 51; -static const uint8_t MISO = 50; -static const uint8_t SCK = 52; - -static const uint8_t SDA = 20; -static const uint8_t SCL = 21; -static const uint8_t LED_BUILTIN = 13; - -static const uint8_t A0 = 54; -static const uint8_t A1 = 55; -static const uint8_t A2 = 56; -static const uint8_t A3 = 57; -static const uint8_t A4 = 58; -static const uint8_t A5 = 59; -static const uint8_t A6 = 60; -static const uint8_t A7 = 61; -static const uint8_t A8 = 62; -static const uint8_t A9 = 63; -static const uint8_t A10 = 64; -static const uint8_t A11 = 65; -static const uint8_t A12 = 66; -static const uint8_t A13 = 67; -static const uint8_t A14 = 68; -static const uint8_t A15 = 69; - -// A majority of the pins are NOT PCINTs, SO BE WARNED (i.e. you cannot use them as receive pins) -// Only pins available for RECEIVE (TRANSMIT can be on any pin): -// (I've deliberately left out pin mapping to the Hardware USARTs - seems senseless to me) -// Pins: 10, 11, 12, 13, 50, 51, 52, 53, 62, 63, 64, 65, 66, 67, 68, 69 - -#define digitalPinToPCICR(p) ( (((p) >= 10) && ((p) <= 13)) || \ - (((p) >= 50) && ((p) <= 53)) || \ - (((p) >= 62) && ((p) <= 69)) ? (&PCICR) : ((uint8_t *)0) ) - -#define digitalPinToPCICRbit(p) ( (((p) >= 10) && ((p) <= 13)) || (((p) >= 50) && ((p) <= 53)) ? 0 : \ - ( (((p) >= 62) && ((p) <= 69)) ? 2 : \ - 0 ) ) - -#define digitalPinToPCMSK(p) ( (((p) >= 10) && ((p) <= 13)) || (((p) >= 50) && ((p) <= 53)) ? (&PCMSK0) : \ - ( (((p) >= 62) && ((p) <= 69)) ? (&PCMSK2) : \ - ((uint8_t *)0) ) ) - -#define digitalPinToPCMSKbit(p) ( (((p) >= 10) && ((p) <= 13)) ? ((p) - 6) : \ - ( ((p) == 50) ? 3 : \ - ( ((p) == 51) ? 2 : \ - ( ((p) == 52) ? 1 : \ - ( ((p) == 53) ? 0 : \ - ( (((p) >= 62) && ((p) <= 69)) ? ((p) - 62) : \ - 0 ) ) ) ) ) ) - -#ifdef ARDUINO_MAIN - -const uint16_t PROGMEM port_to_mode_PGM[] = { - NOT_A_PORT, - (uint16_t) &DDRA, - (uint16_t) &DDRB, - (uint16_t) &DDRC, - (uint16_t) &DDRD, - (uint16_t) &DDRE, - (uint16_t) &DDRF, - (uint16_t) &DDRG, - (uint16_t) &DDRH, - NOT_A_PORT, - (uint16_t) &DDRJ, - (uint16_t) &DDRK, - (uint16_t) &DDRL, -}; - -const uint16_t PROGMEM port_to_output_PGM[] = { - NOT_A_PORT, - (uint16_t) &PORTA, - (uint16_t) &PORTB, - (uint16_t) &PORTC, - (uint16_t) &PORTD, - (uint16_t) &PORTE, - (uint16_t) &PORTF, - (uint16_t) &PORTG, - (uint16_t) &PORTH, - NOT_A_PORT, - (uint16_t) &PORTJ, - (uint16_t) &PORTK, - (uint16_t) &PORTL, -}; - -const uint16_t PROGMEM port_to_input_PGM[] = { - NOT_A_PIN, - (uint16_t) &PINA, - (uint16_t) &PINB, - (uint16_t) &PINC, - (uint16_t) &PIND, - (uint16_t) &PINE, - (uint16_t) &PINF, - (uint16_t) &PING, - (uint16_t) &PINH, - NOT_A_PIN, - (uint16_t) &PINJ, - (uint16_t) &PINK, - (uint16_t) &PINL, -}; - -const uint8_t PROGMEM digital_pin_to_port_PGM[] = { - // PORTLIST - // ------------------------------------------- - PE , // PE 0 ** 0 ** USART0_RX - PE , // PE 1 ** 1 ** USART0_TX - PE , // PE 4 ** 2 ** PWM2 - PE , // PE 5 ** 3 ** PWM3 - PG , // PG 5 ** 4 ** PWM4 - PE , // PE 3 ** 5 ** PWM5 - PH , // PH 3 ** 6 ** PWM6 - PH , // PH 4 ** 7 ** PWM7 - PH , // PH 5 ** 8 ** PWM8 - PH , // PH 6 ** 9 ** PWM9 - PB , // PB 4 ** 10 ** PWM10 - PB , // PB 5 ** 11 ** PWM11 - PB , // PB 6 ** 12 ** PWM12 - PB , // PB 7 ** 13 ** PWM13 - PJ , // PJ 1 ** 14 ** USART3_TX - PJ , // PJ 0 ** 15 ** USART3_RX - PH , // PH 1 ** 16 ** USART2_TX - PH , // PH 0 ** 17 ** USART2_RX - PD , // PD 3 ** 18 ** USART1_TX - PD , // PD 2 ** 19 ** USART1_RX - PD , // PD 1 ** 20 ** I2C_SDA - PD , // PD 0 ** 21 ** I2C_SCL - PA , // PA 0 ** 22 ** D22 - PA , // PA 1 ** 23 ** D23 - PA , // PA 2 ** 24 ** D24 - PA , // PA 3 ** 25 ** D25 - PA , // PA 4 ** 26 ** D26 - PA , // PA 5 ** 27 ** D27 - PA , // PA 6 ** 28 ** D28 - PA , // PA 7 ** 29 ** D29 - PC , // PC 7 ** 30 ** D30 - PC , // PC 6 ** 31 ** D31 - PC , // PC 5 ** 32 ** D32 - PC , // PC 4 ** 33 ** D33 - PC , // PC 3 ** 34 ** D34 - PC , // PC 2 ** 35 ** D35 - PC , // PC 1 ** 36 ** D36 - PC , // PC 0 ** 37 ** D37 - PD , // PD 7 ** 38 ** D38 - PG , // PG 2 ** 39 ** D39 - PG , // PG 1 ** 40 ** D40 - PG , // PG 0 ** 41 ** D41 - PL , // PL 7 ** 42 ** D42 - PL , // PL 6 ** 43 ** D43 - PL , // PL 5 ** 44 ** D44 - PL , // PL 4 ** 45 ** D45 - PL , // PL 3 ** 46 ** D46 - PL , // PL 2 ** 47 ** D47 - PL , // PL 1 ** 48 ** D48 - PL , // PL 0 ** 49 ** D49 - PB , // PB 3 ** 50 ** SPI_MISO - PB , // PB 2 ** 51 ** SPI_MOSI - PB , // PB 1 ** 52 ** SPI_SCK - PB , // PB 0 ** 53 ** SPI_SS - PF , // PF 0 ** 54 ** A0 - PF , // PF 1 ** 55 ** A1 - PF , // PF 2 ** 56 ** A2 - PF , // PF 3 ** 57 ** A3 - PF , // PF 4 ** 58 ** A4 - PF , // PF 5 ** 59 ** A5 - PF , // PF 6 ** 60 ** A6 - PF , // PF 7 ** 61 ** A7 - PK , // PK 0 ** 62 ** A8 - PK , // PK 1 ** 63 ** A9 - PK , // PK 2 ** 64 ** A10 - PK , // PK 3 ** 65 ** A11 - PK , // PK 4 ** 66 ** A12 - PK , // PK 5 ** 67 ** A13 - PK , // PK 6 ** 68 ** A14 - PK , // PK 7 ** 69 ** A15 -}; - -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { - // PIN IN PORT - // ------------------------------------------- - _BV( 0 ) , // PE 0 ** 0 ** USART0_RX - _BV( 1 ) , // PE 1 ** 1 ** USART0_TX - _BV( 4 ) , // PE 4 ** 2 ** PWM2 - _BV( 5 ) , // PE 5 ** 3 ** PWM3 - _BV( 5 ) , // PG 5 ** 4 ** PWM4 - _BV( 3 ) , // PE 3 ** 5 ** PWM5 - _BV( 3 ) , // PH 3 ** 6 ** PWM6 - _BV( 4 ) , // PH 4 ** 7 ** PWM7 - _BV( 5 ) , // PH 5 ** 8 ** PWM8 - _BV( 6 ) , // PH 6 ** 9 ** PWM9 - _BV( 4 ) , // PB 4 ** 10 ** PWM10 - _BV( 5 ) , // PB 5 ** 11 ** PWM11 - _BV( 6 ) , // PB 6 ** 12 ** PWM12 - _BV( 7 ) , // PB 7 ** 13 ** PWM13 - _BV( 1 ) , // PJ 1 ** 14 ** USART3_TX - _BV( 0 ) , // PJ 0 ** 15 ** USART3_RX - _BV( 1 ) , // PH 1 ** 16 ** USART2_TX - _BV( 0 ) , // PH 0 ** 17 ** USART2_RX - _BV( 3 ) , // PD 3 ** 18 ** USART1_TX - _BV( 2 ) , // PD 2 ** 19 ** USART1_RX - _BV( 1 ) , // PD 1 ** 20 ** I2C_SDA - _BV( 0 ) , // PD 0 ** 21 ** I2C_SCL - _BV( 0 ) , // PA 0 ** 22 ** D22 - _BV( 1 ) , // PA 1 ** 23 ** D23 - _BV( 2 ) , // PA 2 ** 24 ** D24 - _BV( 3 ) , // PA 3 ** 25 ** D25 - _BV( 4 ) , // PA 4 ** 26 ** D26 - _BV( 5 ) , // PA 5 ** 27 ** D27 - _BV( 6 ) , // PA 6 ** 28 ** D28 - _BV( 7 ) , // PA 7 ** 29 ** D29 - _BV( 7 ) , // PC 7 ** 30 ** D30 - _BV( 6 ) , // PC 6 ** 31 ** D31 - _BV( 5 ) , // PC 5 ** 32 ** D32 - _BV( 4 ) , // PC 4 ** 33 ** D33 - _BV( 3 ) , // PC 3 ** 34 ** D34 - _BV( 2 ) , // PC 2 ** 35 ** D35 - _BV( 1 ) , // PC 1 ** 36 ** D36 - _BV( 0 ) , // PC 0 ** 37 ** D37 - _BV( 7 ) , // PD 7 ** 38 ** D38 - _BV( 2 ) , // PG 2 ** 39 ** D39 - _BV( 1 ) , // PG 1 ** 40 ** D40 - _BV( 0 ) , // PG 0 ** 41 ** D41 - _BV( 7 ) , // PL 7 ** 42 ** D42 - _BV( 6 ) , // PL 6 ** 43 ** D43 - _BV( 5 ) , // PL 5 ** 44 ** D44 - _BV( 4 ) , // PL 4 ** 45 ** D45 - _BV( 3 ) , // PL 3 ** 46 ** D46 - _BV( 2 ) , // PL 2 ** 47 ** D47 - _BV( 1 ) , // PL 1 ** 48 ** D48 - _BV( 0 ) , // PL 0 ** 49 ** D49 - _BV( 3 ) , // PB 3 ** 50 ** SPI_MISO - _BV( 2 ) , // PB 2 ** 51 ** SPI_MOSI - _BV( 1 ) , // PB 1 ** 52 ** SPI_SCK - _BV( 0 ) , // PB 0 ** 53 ** SPI_SS - _BV( 0 ) , // PF 0 ** 54 ** A0 - _BV( 1 ) , // PF 1 ** 55 ** A1 - _BV( 2 ) , // PF 2 ** 56 ** A2 - _BV( 3 ) , // PF 3 ** 57 ** A3 - _BV( 4 ) , // PF 4 ** 58 ** A4 - _BV( 5 ) , // PF 5 ** 59 ** A5 - _BV( 6 ) , // PF 6 ** 60 ** A6 - _BV( 7 ) , // PF 7 ** 61 ** A7 - _BV( 0 ) , // PK 0 ** 62 ** A8 - _BV( 1 ) , // PK 1 ** 63 ** A9 - _BV( 2 ) , // PK 2 ** 64 ** A10 - _BV( 3 ) , // PK 3 ** 65 ** A11 - _BV( 4 ) , // PK 4 ** 66 ** A12 - _BV( 5 ) , // PK 5 ** 67 ** A13 - _BV( 6 ) , // PK 6 ** 68 ** A14 - _BV( 7 ) , // PK 7 ** 69 ** A15 -}; - -const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { - // TIMERS - // ------------------------------------------- - NOT_ON_TIMER , // PE 0 ** 0 ** USART0_RX - NOT_ON_TIMER , // PE 1 ** 1 ** USART0_TX - TIMER3B , // PE 4 ** 2 ** PWM2 - TIMER3C , // PE 5 ** 3 ** PWM3 - TIMER0B , // PG 5 ** 4 ** PWM4 - TIMER3A , // PE 3 ** 5 ** PWM5 - TIMER4A , // PH 3 ** 6 ** PWM6 - TIMER4B , // PH 4 ** 7 ** PWM7 - TIMER4C , // PH 5 ** 8 ** PWM8 - TIMER2B , // PH 6 ** 9 ** PWM9 - TIMER2A , // PB 4 ** 10 ** PWM10 - TIMER1A , // PB 5 ** 11 ** PWM11 - TIMER1B , // PB 6 ** 12 ** PWM12 - TIMER0A , // PB 7 ** 13 ** PWM13 - NOT_ON_TIMER , // PJ 1 ** 14 ** USART3_TX - NOT_ON_TIMER , // PJ 0 ** 15 ** USART3_RX - NOT_ON_TIMER , // PH 1 ** 16 ** USART2_TX - NOT_ON_TIMER , // PH 0 ** 17 ** USART2_RX - NOT_ON_TIMER , // PD 3 ** 18 ** USART1_TX - NOT_ON_TIMER , // PD 2 ** 19 ** USART1_RX - NOT_ON_TIMER , // PD 1 ** 20 ** I2C_SDA - NOT_ON_TIMER , // PD 0 ** 21 ** I2C_SCL - NOT_ON_TIMER , // PA 0 ** 22 ** D22 - NOT_ON_TIMER , // PA 1 ** 23 ** D23 - NOT_ON_TIMER , // PA 2 ** 24 ** D24 - NOT_ON_TIMER , // PA 3 ** 25 ** D25 - NOT_ON_TIMER , // PA 4 ** 26 ** D26 - NOT_ON_TIMER , // PA 5 ** 27 ** D27 - NOT_ON_TIMER , // PA 6 ** 28 ** D28 - NOT_ON_TIMER , // PA 7 ** 29 ** D29 - NOT_ON_TIMER , // PC 7 ** 30 ** D30 - NOT_ON_TIMER , // PC 6 ** 31 ** D31 - NOT_ON_TIMER , // PC 5 ** 32 ** D32 - NOT_ON_TIMER , // PC 4 ** 33 ** D33 - NOT_ON_TIMER , // PC 3 ** 34 ** D34 - NOT_ON_TIMER , // PC 2 ** 35 ** D35 - NOT_ON_TIMER , // PC 1 ** 36 ** D36 - NOT_ON_TIMER , // PC 0 ** 37 ** D37 - NOT_ON_TIMER , // PD 7 ** 38 ** D38 - NOT_ON_TIMER , // PG 2 ** 39 ** D39 - NOT_ON_TIMER , // PG 1 ** 40 ** D40 - NOT_ON_TIMER , // PG 0 ** 41 ** D41 - NOT_ON_TIMER , // PL 7 ** 42 ** D42 - NOT_ON_TIMER , // PL 6 ** 43 ** D43 - TIMER5C , // PL 5 ** 44 ** D44 - TIMER5B , // PL 4 ** 45 ** D45 - TIMER5A , // PL 3 ** 46 ** D46 - NOT_ON_TIMER , // PL 2 ** 47 ** D47 - NOT_ON_TIMER , // PL 1 ** 48 ** D48 - NOT_ON_TIMER , // PL 0 ** 49 ** D49 - NOT_ON_TIMER , // PB 3 ** 50 ** SPI_MISO - NOT_ON_TIMER , // PB 2 ** 51 ** SPI_MOSI - NOT_ON_TIMER , // PB 1 ** 52 ** SPI_SCK - NOT_ON_TIMER , // PB 0 ** 53 ** SPI_SS - NOT_ON_TIMER , // PF 0 ** 54 ** A0 - NOT_ON_TIMER , // PF 1 ** 55 ** A1 - NOT_ON_TIMER , // PF 2 ** 56 ** A2 - NOT_ON_TIMER , // PF 3 ** 57 ** A3 - NOT_ON_TIMER , // PF 4 ** 58 ** A4 - NOT_ON_TIMER , // PF 5 ** 59 ** A5 - NOT_ON_TIMER , // PF 6 ** 60 ** A6 - NOT_ON_TIMER , // PF 7 ** 61 ** A7 - NOT_ON_TIMER , // PK 0 ** 62 ** A8 - NOT_ON_TIMER , // PK 1 ** 63 ** A9 - NOT_ON_TIMER , // PK 2 ** 64 ** A10 - NOT_ON_TIMER , // PK 3 ** 65 ** A11 - NOT_ON_TIMER , // PK 4 ** 66 ** A12 - NOT_ON_TIMER , // PK 5 ** 67 ** A13 - NOT_ON_TIMER , // PK 6 ** 68 ** A14 - NOT_ON_TIMER , // PK 7 ** 69 ** A15 -}; - -#endif - -#endif \ No newline at end of file diff --git a/tmk_core/protocol/usb_hid/arduino-1.0.1/variants/standard/pins_arduino.h b/tmk_core/protocol/usb_hid/arduino-1.0.1/variants/standard/pins_arduino.h deleted file mode 100644 index 30b42663..00000000 --- a/tmk_core/protocol/usb_hid/arduino-1.0.1/variants/standard/pins_arduino.h +++ /dev/null @@ -1,218 +0,0 @@ -/* - pins_arduino.h - Pin definition functions for Arduino - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2007 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ -*/ - -#ifndef Pins_Arduino_h -#define Pins_Arduino_h - -#include - -#define NUM_DIGITAL_PINS 20 -#define NUM_ANALOG_INPUTS 6 -#define analogInputToDigitalPin(p) ((p < 6) ? (p) + 14 : -1) - -#if defined(__AVR_ATmega8__) -#define digitalPinHasPWM(p) ((p) == 9 || (p) == 10 || (p) == 11) -#else -#define digitalPinHasPWM(p) ((p) == 3 || (p) == 5 || (p) == 6 || (p) == 9 || (p) == 10 || (p) == 11) -#endif - -static const uint8_t SS = 10; -static const uint8_t MOSI = 11; -static const uint8_t MISO = 12; -static const uint8_t SCK = 13; - -static const uint8_t SDA = 18; -static const uint8_t SCL = 19; -static const uint8_t LED_BUILTIN = 13; - -static const uint8_t A0 = 14; -static const uint8_t A1 = 15; -static const uint8_t A2 = 16; -static const uint8_t A3 = 17; -static const uint8_t A4 = 18; -static const uint8_t A5 = 19; -static const uint8_t A6 = 20; -static const uint8_t A7 = 21; - -#define digitalPinToPCICR(p) (((p) >= 0 && (p) <= 21) ? (&PCICR) : ((uint8_t *)0)) -#define digitalPinToPCICRbit(p) (((p) <= 7) ? 2 : (((p) <= 13) ? 0 : 1)) -#define digitalPinToPCMSK(p) (((p) <= 7) ? (&PCMSK2) : (((p) <= 13) ? (&PCMSK0) : (((p) <= 21) ? (&PCMSK1) : ((uint8_t *)0)))) -#define digitalPinToPCMSKbit(p) (((p) <= 7) ? (p) : (((p) <= 13) ? ((p) - 8) : ((p) - 14))) - -#ifdef ARDUINO_MAIN - -// On the Arduino board, digital pins are also used -// for the analog output (software PWM). Analog input -// pins are a separate set. - -// ATMEL ATMEGA8 & 168 / ARDUINO -// -// +-\/-+ -// PC6 1| |28 PC5 (AI 5) -// (D 0) PD0 2| |27 PC4 (AI 4) -// (D 1) PD1 3| |26 PC3 (AI 3) -// (D 2) PD2 4| |25 PC2 (AI 2) -// PWM+ (D 3) PD3 5| |24 PC1 (AI 1) -// (D 4) PD4 6| |23 PC0 (AI 0) -// VCC 7| |22 GND -// GND 8| |21 AREF -// PB6 9| |20 AVCC -// PB7 10| |19 PB5 (D 13) -// PWM+ (D 5) PD5 11| |18 PB4 (D 12) -// PWM+ (D 6) PD6 12| |17 PB3 (D 11) PWM -// (D 7) PD7 13| |16 PB2 (D 10) PWM -// (D 8) PB0 14| |15 PB1 (D 9) PWM -// +----+ -// -// (PWM+ indicates the additional PWM pins on the ATmega168.) - -// ATMEL ATMEGA1280 / ARDUINO -// -// 0-7 PE0-PE7 works -// 8-13 PB0-PB5 works -// 14-21 PA0-PA7 works -// 22-29 PH0-PH7 works -// 30-35 PG5-PG0 works -// 36-43 PC7-PC0 works -// 44-51 PJ7-PJ0 works -// 52-59 PL7-PL0 works -// 60-67 PD7-PD0 works -// A0-A7 PF0-PF7 -// A8-A15 PK0-PK7 - - -// these arrays map port names (e.g. port B) to the -// appropriate addresses for various functions (e.g. reading -// and writing) -const uint16_t PROGMEM port_to_mode_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &DDRB, - (uint16_t) &DDRC, - (uint16_t) &DDRD, -}; - -const uint16_t PROGMEM port_to_output_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PORTB, - (uint16_t) &PORTC, - (uint16_t) &PORTD, -}; - -const uint16_t PROGMEM port_to_input_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PINB, - (uint16_t) &PINC, - (uint16_t) &PIND, -}; - -const uint8_t PROGMEM digital_pin_to_port_PGM[] = { - PD, /* 0 */ - PD, - PD, - PD, - PD, - PD, - PD, - PD, - PB, /* 8 */ - PB, - PB, - PB, - PB, - PB, - PC, /* 14 */ - PC, - PC, - PC, - PC, - PC, -}; - -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { - _BV(0), /* 0, port D */ - _BV(1), - _BV(2), - _BV(3), - _BV(4), - _BV(5), - _BV(6), - _BV(7), - _BV(0), /* 8, port B */ - _BV(1), - _BV(2), - _BV(3), - _BV(4), - _BV(5), - _BV(0), /* 14, port C */ - _BV(1), - _BV(2), - _BV(3), - _BV(4), - _BV(5), -}; - -const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { - NOT_ON_TIMER, /* 0 - port D */ - NOT_ON_TIMER, - NOT_ON_TIMER, - // on the ATmega168, digital pin 3 has hardware pwm -#if defined(__AVR_ATmega8__) - NOT_ON_TIMER, -#else - TIMER2B, -#endif - NOT_ON_TIMER, - // on the ATmega168, digital pins 5 and 6 have hardware pwm -#if defined(__AVR_ATmega8__) - NOT_ON_TIMER, - NOT_ON_TIMER, -#else - TIMER0B, - TIMER0A, -#endif - NOT_ON_TIMER, - NOT_ON_TIMER, /* 8 - port B */ - TIMER1A, - TIMER1B, -#if defined(__AVR_ATmega8__) - TIMER2, -#else - TIMER2A, -#endif - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, /* 14 - port C */ - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, -}; - -#endif - -#endif diff --git a/tmk_core/protocol/usb_hid/test/Makefile b/tmk_core/protocol/usb_hid/test/Makefile deleted file mode 100644 index 83bf2aed..00000000 --- a/tmk_core/protocol/usb_hid/test/Makefile +++ /dev/null @@ -1,126 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# Target file name (without extension). -TARGET = usb_hid_test - -TMK_DIR = ../../.. - -# Directory keyboard dependent files exist -TARGET_DIR = . - -# MCU name -MCU = atmega32u4 - - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) -# Interrupt driven control endpoint task -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - - -# Build Options -# comment out to disable the options. -# -# Console for debug -OPT_DEFS += -DCONSOLE_ENABLE - -# Boot Section Size in bytes -# Teensy halfKay 512 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -#OPT_DEFS += -DBOOT_SIZE=4096 - - - -SRC = test.cpp -SRC += common/debug.c -SRC += common/print.c - -CONFIG_H = config.h - - - -# Search Path -VPATH += $(TARGET_DIR) -VPATH += $(TMK_DIR) -VPATH += $(TMK_DIR)/common - - - -# program Leonardo -PROGRAM_CMD = avrdude -p$(MCU) -cavr109 -P$(DEV) -b57600 -Uflash:w:$(TARGET).hex - - - -include $(TMK_DIR)/protocol/usb_hid.mk -include $(TMK_DIR)/protocol/lufa.mk -include $(TMK_DIR)/rules.mk diff --git a/tmk_core/protocol/usb_hid/test/config.h b/tmk_core/protocol/usb_hid/test/config.h deleted file mode 100644 index c2230fb5..00000000 --- a/tmk_core/protocol/usb_hid/test/config.h +++ /dev/null @@ -1,40 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0xCAFE -#define DEVICE_VER 0x0814 -#define MANUFACTURER t.m.k. -#define PRODUCT USB to USB keyboard converter - - -#define DESCRIPTION Product from t.m.k. keyboard firmware project - - -/* matrix size */ -#define MATRIX_ROWS 32 -#define MATRIX_COLS 8 - - -/* key combination for command */ -#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT))) - -#endif diff --git a/tmk_core/protocol/usb_hid/test/test.cpp b/tmk_core/protocol/usb_hid/test/test.cpp deleted file mode 100644 index 4958f0c6..00000000 --- a/tmk_core/protocol/usb_hid/test/test.cpp +++ /dev/null @@ -1,92 +0,0 @@ -#include -#include -#include -#include -#include - -// USB HID host -#include "Usb.h" -#include "hid.h" -#include "hidboot.h" -#include "parser.h" - -// LUFA -#include "lufa.h" - -#include "debug.h" - -#include "leonardo_led.h" - - -static USB usb_host; -static HIDBoot kbd(&usb_host); -static KBDReportParser kbd_parser; - -static void LUFA_setup(void) -{ - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Disable clock division */ - clock_prescale_set(clock_div_1); - - // Leonardo needs. Without this USB device is not recognized. - USB_Disable(); - - USB_Init(); - - // for Console_Task - USB_Device_EnableSOFEvents(); -} - -static void HID_setup() -{ - // Arduino Timer startup: wiring.c - init(); - - if (usb_host.Init() == -1) { - debug("HID init: failed\n"); - LED_TX_OFF; - } - - _delay_ms(200); - - kbd.SetReportParser(0, (HIDReportParser*)&kbd_parser); -} - -int main(void) -{ - // LED for debug - LED_TX_INIT; - LED_TX_ON; - - print_enable = true; - debug_enable = true; - debug_matrix = true; - debug_keyboard = true; - debug_mouse = true; - - LUFA_setup(); - sei(); - - // wait for startup of sendchar routine - while (USB_DeviceState != DEVICE_STATE_Configured) ; - if (debug_enable) { - _delay_ms(1000); - } - - HID_setup(); - - debug("init: done\n"); - for (;;) { - usb_host.Task(); - -#if !defined(INTERRUPT_CONTROL_ENDPOINT) - // LUFA Task for control request - USB_USBTask(); -#endif - } - - return 0; -} -- 2.46.2